Table of Contents
To pour a typical 10×10 concrete slab will cost $670 to $930, a 12×12 slab for a patio will cost $796 to $1,476, a 20×24 driveway slab runs between $1,440 and $3,360, and a 24×24 slab for a garage will cost $3,058 to $5,944. Get free estimates from concrete companies near you.
How many bags of concrete do I need for a 10×10 slab?
The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
How much does it cost to pour a 10×12 concrete slab?
Cost of concrete per square foot Slab Size Square Feet Average Cost 10×10 100 $600 10×12 120 $720 10×20 200 $1,200 12×12 144 $864.
How much does a 12 by 12 concrete slab cost?
How much does a concrete slab cost? The average cost for a standard 12′ x 12′ shed concrete slab costs roughly: $720 – $1,200. or $6 – $10.00 per square foot.
How much will my concrete slab cost?
Cost of a Concrete Slab Expect to pay a base cost of around $6 per square foot for the material itself, or within a range of $4 to $8 per square foot depending on factors like labor and concrete thickness.
How many bags of concrete do I need for a 10×8 slab?
Regarding this, “how many bags of concrete do I need for a 10×8 slab?”, at 4 inches thick, generally you will need approximately either 58 bags of 60lb or 45 bags of 80lb of premixed concrete for a 10×8 slab, at 5 inches thick slab, either 73 bags of 60lb or 56 bags of 80lb premixed concrete are required, while at 6.
What is a cheaper alternative to concrete?
There are a few different types you can find in the home improvement store that can replace concrete cement used for driveways and walkways. These include pea gravel, crushed stone, and quarry process. Cheaper than other surface materials and low-cost to install.
How many yards of concrete do I need for a 10×10 slab?
The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.
How thick does a concrete slab need to be for a house?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
How many bags of concrete do I need for a 4×8 slab?
As per calculation, for a 4×8 slab at 4 inch thick, generally you will need approximately either 23 bags of 60lb or 18 bags of 80lb of premixed concrete, at 5 inches thick slab, either 29 bags of 60lb or 23 bags of 80lb premixed concrete are required, while at 6 inches thick slab, either 35 bags of 60lb or 27 bags of.
How much concrete do I need for a 40×60 shop?
How much does a 40×60 concrete slab cost? It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That’s based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.
How much is a 10×20 concrete patio?
How Much Does a 10×20 Concrete Patio Cost? A concrete patio costs between $4 and $12 per square foot, including materials and labor. Based on those estimates, a 10-foot by 20-foot concrete patio would cost between $800 and $2,400.
Do you need rebar for 4 inch slab?
The thickness of rebar should be no more than 1/8 that of the slab, so a 4” slab shouldn’t have steel greater than #4 or 1/2″ bar. It’s best to check with a Structural Engineer if your slab will bridge or cantilever. What is this? For 4” concrete slabs used for driveways and patios, #3 rebar is common.
Can you pour your own concrete slab?
Used for walkways, patios, and floors, concrete slabs are inexpensive to install and durable enough to last for years. When you pour your own concrete slab, you’re giving yourself a design material that is adaptive to many of your outdoor design needs, while saving money that would have been spent on a contractor.
How many sq ft does a yard of concrete cover?
How much concrete is in a yard? Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.
How much does an 80 lb bag of concrete cover?
80 lb bag of concrete yields 0.60 cubic feet which is approximately around 0.0222 cubic yards that will cover around 3.6 sq ft area up to standard depth of 2 inch excavation or backfills, and for 1 cubic feet of landfill you will need 1.66 bags of 80 lb concrete.
How many 80 bags of concrete make a yard?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
How much area does an 80 pound bag of concrete cover?
15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields . 30 cubic feet, 60 pounds of concrete mix yields . 45 cubic feet and an 80-pound bag yields . 60 cubic feet.
