Table of Contents
To measure your countertops, start by measuring the length of all counter tops, base cabinets, and island. Also include the inches of back splash. Now measure the width of the counter tops and multiply the total length of the counter tops by the width in inches.
How do you calculate square footage of a countertop?
To calculate the total square footage (after placing seams) you will need to follow this formula: “L” x “W” / 144 = s.f. (Length times width divided by 144 = square feet).
How are quartz countertops measured?
To calculate the area of each countertop section, multiply the length times the width. (Length x Width = Area). Get the total square inches by adding together the areas of each section. You can calculate the square footage by dividing the total square inches by 144.
How much overhang should a countertop have?
A standard countertop usually has an overhang of 1½ inches. Although some countertops may have a longer or shorter overhang, this number is generally the standard length for an overhang in homes. When utilizing an overhang for kitchen islands, the standard amount of overhang is typically 12 inches.
How do I estimate the cost of countertops?
Here is the average estimate cost per square foot for kitchen countertops based on the material.Kitchen Countertops Cost Per Square Foot. Material Cost Concrete $65 – $135 per square foot Granite $70 – $175 per square foot Engineered Quartz $80 – $140 per square foot Marble $110 – $250 per square foot.
What is the standard size for a kitchen countertop?
Countertop Width Standards Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
Are countertops measured in square feet?
= Total Square Feet: Measure each countertop section and record the length and depth dimensions of the sections (in inches, rounded to the nearest inch). Add all the sections (1-8) together to calculate the total square inches. Divide the total square inches by 144 to get the total square feet.
How do you figure linear feet for countertops?
Imagine the individual pieces lined up end-to-end and determine the length from one end to the other. In the countertop example, you need three pieces of two feet, three feet, and two feet. Thus, the total number of linear feet of countertop material that you need is 2+3+2=7 feet.
How do you measure an island countertop?
Use your tape measure to measure the countertop length from wall to wall (in inches), not just from one edge of your current countertop to the other. Write down the length in the appropriate space on your scale drawing or piece paper whichever case may be. Measure this twice, just to make sure it’s accurate!.
How far can a countertop span without support?
An unsupported span of 24” and up to a maximum of 36” is acceptable as long as the stone is supported on both sides of the span. Longer spans must be supported across the span. Over hangs should be not exceed 6” for 2cm granite, 10″ for 3cm granite and 15″ for 3cm quartz beyond the supported area.
Do you have to put plywood under quartz countertops?
Since quartz countertops are the most popular choice with homeowners, there is a large variety of colours and patterns to choose from. Because of its thickness, the 3 cm quartz can provide adequate support without plywood. Since you won’t need to hide the plywood underneath it, there is no need for a laminated edge.
Is a 10 inch island overhang enough?
The overhang of a kitchen island or purpose built bar is the amount of countertop that extends beyond the body of the actual bar. A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated.
How much does it cost to put in new kitchen countertops?
Countertop installation costs $3,071 on average, with a typical range of $1,852 and $4,309. Homeowners usually pay $15 to $70 per square foot for the material and $10 to $30 per square foot for labor, for a total of $25 to $120 per square foot. These two expenses make up the largest portion of the total cost.
Is quartz cheaper than granite?
Quartz and granite countertops are priced similarly per square foot, with granite counters having the wider variation in price. Granite can be more expensive than quartz at times, based on the availability of a color and pattern. Sometimes quartz is more expensive due to the treatments it receives during manufacturing.
How much is a sheet of granite?
How Do the Prices of Granite and the Alternative Options Compare? Granite Between $35 to $75 per square foot Soapstone Between $55 to $100 per square foot Quartzite Between $60 to $120 per square foot Limestone Between $70 to $200 per square foot Onyx Between $75 to $250 per square foot.
How deep should countertops be?
Ensure countertops are deep enough to protect your base cabinets. The standard depth of base cabinets is 24 inches, but the depth of your countertops should be 25 inches when installed. The one-inch overhang is recommended to protect your base cabinets from debris and spills that may fall from the countertop.
What are the kitchen layout?
There are five basic kitchen layouts: L-Shape, G-Shape, U-Shape, One-Wall and Galley. The size and shape of the room will typically determine your layout. Although variations and deviations do exist, most kitchen layouts are based on one of the following shapes.
How long should a countertop be?
For people who need ADA-friendly spaces, countertop measures are different. The standard quartz countertop depth for this is 17 inches with a height of 27 inches. While the countertop can go higher according to preference, the standard height is 28 inches from the floor.
