Table of Contents
How deep do chain link fence posts need to be?
The answer -— as it often does in fencing construction — depends. As a general rule, Fencing Direct recommends at least a 24-inch footing depth for a 4-foot fence, plus an extra 3 inches for every foot of height (for example, 27 inches for a 5-foot post).
Can you pound in chain link fence posts?
Never pound the posts into the ground, especially if you have hard clay or rocky soil, because you’ll bend the tops. The hole should be slightly bigger than the posts, so you can back fill it with dirt packed tightly around the post.
How tall should chain link fence posts be?
End, corner and gate posts should be marked at the height of the fence plus 1 inch; 49″ for a 4′ fence, 61″ for a 5′ fence, etc. Mark intermediate or line posts at height of the fence minus 3 inches; 45″ for 4′ fence, 57″ for 5′ fence, etc. When you add your line post cap and top rail, the height will be accurate.
What is the difference between a line post and a terminal post?
Terminal posts include corner posts and gate posts. They are usually taller and larger than line posts. Line posts are the vertical support structures for the chainwire fence which are usually spaced 10 or less feet apart. Other horizontal logs could rest on these line posts.
How many bags of quikrete do I need for fence posts?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
Can chain link fence post be driven vs concrete?
Installing the post without concrete, driving them, allows the soil to do what it does best, absorb the moisture keeping the post drier prolonging the life of the post. Driving post instead of pouring them in concrete allows the soil to absorb the water around the post keeping it dry.
How do you install a chain link fence without digging?
5 Ways to Set a Fence Post Without Digging A Metal Spike Anchor and a Sledgehammer. If you are not wanting to dig to set your fence post, a metal spike anchor might be the easiest option. T-Post Driver. E-Z Spike. Steel Posts in the Ground. Above the Ground Fences.
How deep should metal fence posts be buried?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How far do you space fence posts?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
Do you need top rail on chain link fence?
Though some fences, like wooden fences, have two rails (one on the bottom and one on the top), most chain link fences will just have one rail at the top. With extra tall commercial chain link fences, another rail is sometimes added to the middle of the fence.
How deep should a fence post be?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
Can you use terminal post as line post?
Set the terminal posts in concrete using a concrete mix. You can use 1 part cement, 2 parts sand, and 4 parts gravel. Line posts should not be spaced more than 10 feet apart. For example, if the length between two terminal posts is 30 feet, then line posts would be spaced 10 feet apart (see chart below).
How thick are chain link fence posts?
Both 7′ and 8′ high fences will often feature a 3″ (2-7/8″ actual) terminal post and 2-1/2″ (2-3/8″ actual) line posts. Fabric – Most customers will opt for an 11 gauge or heavier option when they are already upgrading to an HF20 framework.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How many square feet does a 50 lb bag of quikrete cover?
Regarding this, how much does a 50 lb bag concrete cover?, as 133 lb concrete = 1 CF, so a bag of 50 lb concrete = 50/133 = 0.375 CF, therefore, a 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk.
