Table of Contents
Mop sinks provide janitorial staff a convenient place to fill and empty mop buckets, as well as clean mops and other supplies. Commercial mop sinks typically are mounted on the floor and can be used to obtain water for cleaning and sanitizing.
What qualifies as a mop sink?
A mop sink is essentially a designated sink used for dumping water from a mop and cleaning a mop head. A mop sink is usually located on or near the floor with a floor drain to make it easier for a janitor to use without having to lift or lower a large bucket of dirty mop water.
What is the difference between a service sink and a mop sink?
Service sinks shall be a wall mounted or floor mounted mop sink with a minimum 3-inch (76 mm) outlet. Laundry trays and laundry sinks are prohibited for use as a service sink. The service sink shall not be located within the toilet facility and may be in a locked janitor closet.
Can you use a utility sink as a mop sink?
At least one utility sink, for the cleaning of mops and for the disposal of mop water or similar liquid waste, is required. The use of utensil washing or equipment washing sinks or food preparation sinks for this purpose is prohibited.
Does mop sink need hot water?
Mop sinks. Provide an approved janitorial sink with hot and cold water and backflow protection. The sink shall be located to prevent contamination of any food preparation areas, food storage areas, utensils, or equipment.
Are service sinks required by code?
For business and mercantile occupancies with an occupant load of 15 or fewer, service sinks shall not be required.
Can you wash your hands in a service sink?
Where to Wash Your Hands. Sections 2-301.152 and 4-501.163 of the Food Code state that staff are prohibited from washing their hands in warewashing sinks, food prep sinks, service sinks, and mop sinks. Simply put, foodservice employees should only wash their hands in dedicated handwashing sinks.
What is the difference between laundry sink and kitchen sink?
Unlike the traditional kitchen or bathroom sinks, laundry sink tubs are deeper and have a wider area. This is due to the fact that it needs to accommodate your garments which are larger in area than plates and cutlery.
Can a kitchen sink be a service sink?
My question is, can a utility sink be used as a kitchen sink? A: A unique-looking sink can be the focal point of any kitchen. So, it’s perfectly fine to be creative with your sink choice, as long as it is up to code for a kitchen installation.
Can a kitchen sink be used in a laundry room?
Yes! So happy that we went with this option. The ergonomics are so much better (no more hunching over washing out paint rollers and trays!), it looks so much nicer and cleaner, and it is so functional for soaking dirty clothes!.
Can a mop sink be in a kitchen?
A mop sink is essential in restaurants, commercial kitchens, grocery stores, and other commercial facilities so that employees can dump dirty mop water into a contained drainage area.
Do you need 2 sinks in a commercial kitchen?
Large commercial kitchens may have several. You need at least one double sink for washing and rinsing equipment. You are required to have at least one more sink for washing hands. That sink cannot be used for any other purpose.
What is a food prep sink?
Food Preparation Sink. A separate stainless steel sink must be provided in establishments where food preparation occurs or could occur (e.g., washing or trimming produce, soaking food, washing meat, thawing food under running water, etc.).
What is a water closet in a house?
Definition of water closet 1 : a compartment or room with a toilet Confronted with the cramped confines of a bathroom in a typical starter home—one of those spaces aptly described by the term water closet—homeowners may well entertain grand plans for expansion.—Feb 7, 2022.
Does a commercial kitchen need a floor drain?
Floor drains need to be provided throughout the kitchen area. A plumbing contractor can hardly work on commercial kitchens without some knowledge of backflow prevention. Equipment must have some protection from any contamination coming through a device and back into the drinking water.
What is a compartment sink?
Compartment sinks, sometimes referred to as pot and dish sinks or sanitizing sinks, are used to clean and sanitize heavy duty pots, pans and utensils by hand. These commercial sinks are available in one compartment, two compartments, three compartments, or four compartments.
How do you clean a mop sink?
Pour a mixture of 1 cup of water and 1/4 cup of white distilled vinegar into a spray bottle and spray the sink. You can spray just the stained area or you can spray and clean the entire sink. Allow the solution to sit for 10 to 15 minutes.
What should every hand washing sink have?
Handwashing sinks must have warm water, soap, paper towels or an air dryer, and a sign reminding employees to wash their hands. If the handwashing station offers paper towels, there should also be a garbage can to dispose of them. Let your manager know if a handwashing sink is ever out of supplies.
Which 5 items are required at each handwashing sink?
Hand washing stations should include hot and cold running drinkable water, soap, and a way to dry hands. They should also include a garbage container if paper towels are provided, and signage reminding staff to wash hands before returning to work. Plumbing must always be installed and maintained by a licensed plumber.
Which sink is an appropriate place for food workers to wash their hands?
Restrooms are notorious for harboring pathogens, and the restrooms at restaurants are no different. When food workers use the restroom, they should always wash their hands in the restroom sink and then wash them again at a hand washing sink before continuing their duties. This practice is called double handwashing.
How much does it cost to have a utility sink installed?
The cost to have a plumber install a standard utility sink where basic hook-ups and vents are already in place runs about $200-$500, assuming no extensive new piping or venting is required, but it can cost more if extensive work is needed.
How high do you mount a mop sink faucet?
The standard height for a mop sink faucet is 14.5” – 15” (364mm). It usually comes with a ¾” garden hose thread. The faucet has two taps and they are 8” apart. The mop sink height should be around 6”-12”.
