Table of Contents
When was my radial arm saw made?
Invented by Raymond DeWalt in 1922, the radial arm saw was the primary tool used for cutting long pieces of stock to length until the introduction of the power miter saw in the 1970s.
How do I find out what year my Craftsman table saw is?
Go to Sears’ Manage My Life website (see Resources). Type the model number into the search bar at the top. Click on the owner’s manual in the search results. Look for the date on the front page or the back page of the manual.
When did Craftsman stop making radial arm saws?
The brand name “Craftsman®” and store name “Sears” are written on the saws. Sears stores and catalogs sold the 8-, 9- and 10-inch saws from 1958 through 1992. The 8?-inch saws were sold from 1990 through 1995.
Where is the model number on Craftsman radial arm saw?
The Model Number will be found on a plate attached to your saw, at the left side of the base. Always mention the Model Number in all correspondence regarding the CRAFTSMAN RADIAL SAW or when ordering repair parts.
What kind of cut should never be done on the radial arm saw?
Do not use radial arm saws for ripping unless the spreader (riving knife) and anti-kickback devices are provided and properly adjusted. Do not take your hand away from the operating handle unless the cutting head is behind the fence.
What happened to the radial arm saw?
In short, sliding compound miter saws (the bigger cousins of the chop saw) have taken the place of the radial-arm saw. With a blade diameter as large as 12 in., big cross-cut capacities, and an ever-growing number of do-dads and whiz-bang features, these tools have many benefits over their predecessors.
Is the Craftsman radial arm saw recall still active?
The upgrade kits are amazing. If you have an older craftsman/sears radial arm saw, visit this website for either $100 or an awesome upgrade kit including tables, fence and a really nice and safe blade guard.
How much is an old Craftsman table saw worth?
How much is an old Craftsman table saw worth? A Craftsman model 113 table saw in solid working condition can go for approximately $100-$200 depending on the state it is in. Even a non-functioning saw can go for $50-$80, as many enthusiasts want vintage parts.
How do you read a Craftsman serial number?
Write down the first six numbers of the mower’s serial number. The first two numbers are the mower’s month of manufacture. The second two numbers indicate the day of manufacture and the third two will signify the year of manufacture.
Can you still buy radial arm saws?
There is but a single U.S. company still making the radial arm saw: the Original Saw Co. of Britt, Iowa. Two Italian-made models, manufactured by Maggi and Omga, are imported by U.S. distributors, but annual sales are measured in the hundreds, not the thousands.
Who makes Craftsman radial saws?
Emerson Tool Co. (ETC) is providing $50 to owners of Craftsman® 8-inch, 8¼-inch, 9-inch, and 10-inch Radial Arm Saws, who follow a four-step process described on this website to properly disable their radial arm saw and document such steps.
How much does a radial arm saw cost?
The price of radial arm saws starts from $100 and ends at $500 or more, depending on their functionality and features.
Can a radial arm saw rip wood?
Radial arm saws are among the most versatile woodworking machines in the woodshop. They can be used to cross-cut, rip, cut compound miters, cut dadoes and rabbets, and more.
What is the largest size blade a 10 inch radial arm saw can carry?
As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.
Can you use a dado blade on a radial arm saw?
Exact same physical phenomenon. So, no, don’t try dado cuts on a radial arm saw. Because the blade rotates with the direction of of the pull cut instead of against it, there is the potential danger of the blade climbing up over the workpiece toward the operator if you pull the saw carriage through the cut too quickly.
Are radial arm saws outdated?
If they are used in any other way, no.” Ellis Walentine “In my mind, radial arm saws are not at all obsolete. Although sliding compound miter saws do an excellent job of finish-crosscutting boards up to 12” wide, nothing beats a radial arm saw for crosscutting wider stock and rough boards.
What is radial arm saw good for?
The radial-arm saw is the perfect tool for cross-cutting dadoes and rabbets, particularly when making tenons or slots for shelf standards. Raise the blade away from the table and install your stacked dado set to the thickness desired, making certain to install it in the proper direction for the rotation of the blade.
What is a radial arm saw fence?
The radial arm features a raised motor and saw blade which cuts stock from above. This means that the saw blade cuts slightly down into the tabletop on virtually every cut, and over time the table surface becomes filled with grooves from the blade.
Are vintage Craftsman table saws any good?
They are still a decent saw, and better than many Chinese imports, but they are not as good as the old timers. I don’t really have an opinion about modern Craftsman saws, but I suspect that the quality had gone down even further.
How much is a 10in Craftsman table saw?
The Craftsman 10-in table saw retails for $199 from your local Lowe’s or online. It comes with the portable stand, the rip fence, a blade guard, anti-kickback pawls, miter gauge, 2 blade wrenches, a push stick, and a 10-inch 24T carbide blade.
What is a Craftsman 10 table saw worth?
The suggested price for the 10” Jobsite Table Saw is $499.99.
