Table of Contents
As said earlier, Westinghouse circuit breakers are compatible with Square D, Eaton, and Cutler-Hammer because they have the same ownership. Meaning, you have many choices when you need to replace your Westinghouse breaker.
Are Eaton and Westinghouse breakers the same?
Why Does Eaton and Westinghouse Have Compatible Breakers? The answer is simple: the same company owns the production rights for both Eaton and Westinghouse. Westinghouse had a low-voltage air circuit breaker line. The company sold the rights to this product line to Square D, which then sold it to Eaton Corporation.
Is Westinghouse A Eaton?
Eaton Electrical purchased the Westinghouse Distribution and Controls Business Unit in 1994 which was one of Eaton’s largest acquisitions.
Which breakers are interchangeable?
Specified breakers are breakers that have been tested and listed for a panel by the manufacturer. Interchangeable breakers are breakers that have been tested in the panels that they are approved for and are similar to specified breakers, typically by a third party such as Underwriter’s Laboratory (UL).
Can you mix and match breaker brands?
Brand: Always install the correct brand of breakers in your breaker panel. While some breakers are interchangeable, many are not, even if they look the same. Replacing one brand of breaker with another can be dangerous, may void your breaker or panel warranty, and may lead to a failed electrical inspection.
Can I use a Square D breaker in a Eaton panel?
Designed to fit virtually any panel Eaton’s UL classified breakers are designed and tested to be both mechanically and electrically interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D. Video Player is loading.
Can I use a GE breaker in an Eaton panel?
TLDR: They’re all wrong. Swap with a GE or classified breaker (e.g. Eaton CL not BR).
Did Cutler-Hammer buy Westinghouse?
Westinghouse said Cleveland-based Eaton plans to merge DCBU into the suitor’s Industrial Control & Power Distribution Operations, which markets Cutler-Hammer products. The Eaton operations have annual sales of about $500 million.
Who owns Westinghouse electrical panels?
Westinghouse Electric Corporation Formerly Westinghouse Electric & Manufacturing Company (1886–1945) Westinghouse Electric Corp. (1945–1997) CBS Corp. (1997–2000) Successor Viacom (2000–2006) CBS Corporation (2006–2019) ViacomCBS (2019–present) Headquarters Pittsburgh, Pennsylvania, U.S. , United States Area served Worldwide.
Who does Eaton own?
Cooper Power Systems, LLC Delaware Cooper Technologies Company Delaware Eaton Aerospace LLC Delaware Eaton Automated Transmission Technologies Corporation Delaware Eaton Electric Holdings LLC Delaware.
Are Westinghouse and Cutler-Hammer breakers interchangeable?
As said earlier, Westinghouse circuit breakers are compatible with Square D, Eaton, and Cutler-Hammer because they have the same ownership. You can find the exact features for your replacement breaker in other brands, but sometimes, these do not fit in your load center.
How do you know if a breaker is compatible?
If you open the door of your service panel and look on the inside cover of the door, there should be a label that specifies the types of breakers to use with the panel. Note that the model or series of breakers for the branch circuits may differ from the model specified for the main breaker or service disconnect.
What breakers fit General Electric?
Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible. Match the size and voltage requirements when using Siemens breakers, as using the wrong breakers can have dangerous results. If the wrong breaker is used it could fail to break (shut off power) during a surge.
Can I use any brand circuit breaker?
Never place a different brand circuit breaker in a circuit breaker panel of a different brand. Contrary to the belief that they are all the same and will work in any circuit breaker panel, the fact is just the opposite. Unlike most electrical devices like switches and outlets, circuit breakers are brand specific.
Does a sub panel have to be the same brand as the main panel?
Generally, the breaker has to match the manufacturer of the box. But you do not need to match manufacturers between separate boxes. There is no code in the NEC that requires you to use matching breaker to the panel box.
What does BR mean on a circuit breaker?
BR breakers are 1″ in Width. BR breakers are black, with black handles (In most cases.
Are Square D and Siemens breakers compatible?
The Siemens Type QD circuit breakers have been classified by UL for use in place of the Square D Type QO® listed circuit breakers in the Square D UL listed panelboards shown below.
Do Siemens and Square D breakers interchangeable?
It’s Best to Choose Circuit Breakers Made by Siemens Their breakers even use the same parts, but they are not certified to be interchangeable. Furthermore, I need to make it clear that many manufacturer’s manuals will only recommend products made by the brand for use as a Siemens main breaker.
What breakers are compatible with Square D panels?
Square D QO breakers are compatible with QO breaker boxes and CSEDs. Each ANSI-certified and UL-listed. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class.
What breakers fit a Thomas and Betts?
This handy chart seems to show that the Eaton CL230 breaker is a “Classified” replacement for the Thomas Betts TB230 breaker. Since this is a pretty common breaker sold at national big box home improvement stores it should be straightforward to compare the two.
What is the difference between Eaton Br and Cl breakers?
The Eaton CL line includes some neat breakers that don’t really exist natively, such as their remote control breakers, and AFCI or GFCI for the obsolete panels they fit. The Eaton BR line is actually UL-listed as dual Type BR and C, meaning it is natively listed (not classified) for Challenger panels.
Can I use a GE breaker in a Murray panel?
The answer is yes; Murray load centers have compatible products other than Siemens, although they’re not cross-listed with Murray panels. There are three breaker brands I can recommend that will work. First is the Air Circuit Breakers, which are quite different from their Murray equivalent.
When did Eaton buy Westinghouse?
Eaton is a Cleveland-based manufacturer of auto and industrial parts. Under a 1988 agreement with Westinghouse, Siemens AG, the German electrical components maker, has the right to match the offer. The distribution and controls unit, based in Pittsburgh, employs 12,500 and reported 1992 sales of $1.1 billion.
Did Siemens buy Eaton?
CLEVELAND, OH…. Eaton Corporation (NYSE:ETN) today said it has sold the machine tool controls business of its Vickers Electronic Systems Division (VES) to Siemens Energy and Automation, Inc. for an undisclosed amount. Eaton’s sales for 1998 were $6.6 billion.
Who bought out Cutler-Hammer?
Eaton acquired the Cutler-Hammer business through the acquisition of Cutler-Hammer Inc.
