Table of Contents
Here are seven tell-tale signs that indicate your chimney or fireplace needs cleaning: Your fireplace smells like a campfire. Fires burn oddly. It takes more effort to get a fire going and keep it going. Smoke fills the room. The fireplace damper is black. Fireplace walls have oily marks. There’s evidence of animals.
How do I know if my chimney needs cleaning?
Here are our top 9 Signs that Your Chimney Needs to Be Cleaned: Oily Spots on the Walls of Your Fireplace. Poorly Burning Fires. Odors Coming from the Fireplace. Animals are Inside Your Chimney. Smoke Doesn’t Rise Up the Chimney. Fires are Difficult to Get Started. Chimney Soot is Falling from the Chimney.
How often do you need to clean your chimney?
Homeowners are urged to have their chimneys inspected for creosote buildup and cleaned if necessary in the spring of each year. Chimney fires are characterized by loud cracking or popping noises and a lot of dense smoke from the flue, but often times go undetected by the homeowner.
How do you tell if your chimney is blocked?
Signs of a blocked chimney and its flue liner include: An excessive smell of smoke during a fire. A white residue on the walls of the flue liner. Water leakage. Debris falling towards the base of the fireplace.
What happens if you don’t clean your fireplace?
Ignoring this critical task of chimney cleaning can cause blockage and buildup of toxic gases within your home. When gas and smoke can’t vent outside properly, it can billow back into your home. Aside from that, not cleaning your chimney can also cause a chimney fire.
How do I know if my chimney has creosote?
Unexplained poorly burning fires, a reduced draft or black deposits around your fireplace can all be signs of creosote buildup. To check for creosote buildup look for black soot or tar deposits around the opening of your fireplace, as well as around the throat of the chimney.
Do chimney cleaning logs really work?
Many homeowners wonder if the chimney sweep logs or creosote sweeping logs really work to clean out fireplace flues and get rid of creosote residue so that the fireplaces are safe to use. The short answer is no, they don’t work. At least, not well enough to completely clean out the flue the way it should be cleaned.
Can I clean my own chimney?
In many cases, you can clean the chimney yourself and save a few hundred dollars. Removing ordinary chimney soot is pretty simple. But if you have heavy creosote buildup, you’ll have to call in a pro. Otherwise, hire a certified chimney sweep.
Will a hot fire remove creosote?
Avoid Smoldering Many homeowners allow their fire to smolder until it burns itself out. As the fire begins to burn out more creosote is produced at the lower temperatures. Rather than allowing the fire to smolder, it should be extinguished.
What could block a chimney?
An obstruction, or blockage in your chimney can be caused by any number of factors. Birds’ nests, squirrels’ nests or leaves and debris can enter and block a chimney without a cap. In addition, chimneys that are too short or over-sized cannot ventilate properly.
Why is my chimney smoke black?
After fire is a result of improper burning or an oil leak. During combustion, a small amount of oil puddles in the bottom of the combustion chamber. Because it is not controlled and the fan has turned off, it quickly consumes the oxygen in the combustion chamber and produces thick clouds of black smoke.
What is a Wett test?
A WETT inspection is a review of the components of a wood-burning system to ensure that they are installed correctly, are maintained in good working order, and that all parts of the system are compatible with one another.
Can you clean a chimney from the bottom up?
The Bottom Up Brush & Rod Chimney Cleaning Method is very similar to the Top Down method just a little safer. You will not have to climb up on top of your roof, so this method is great for the homeowner who is not so fond of heights.
What dissolves creosote?
Creosote is moderately soluble in water. Spraying water onto the creosote will help to remove the liquid. However, creosote is a type of oil that is never removed fully by water. Bleach and industrial cleaners will help to pull the creosote out of clothes and off of skin or other surfaces.
How do you inspect a fireplace chimney and stove?
According to the Standards, the inspector is required to inspect: readily accessible and visible portions of the fireplaces and chimneys; lintels above the fireplace openings; damper doors by opening and closing them, if readily accessible and manually operable; and cleanout doors and frames.
How do you clean a wood stove chimney?
The best method for cleaning your chimney is scraping it with a wire chimney brush. The brush may seem expensive, but for people who burn a lot of wood and must clean their chimney more than once a year, a brush gives the best results.
How do you tell if you can burn wood in your fireplace?
If your fireplace has an empty firebox, it is a wood-burning system. Your wood-burning stove will have a door and a space to build your fire, but no ignitors or feeding devices like a pellet stove might have. Wood fires burn wood and vent directly up the flue.
How can you tell if wood is seasoned?
To identify well-seasoned wood, check the ends of the logs. If they are dark in colour and cracked, they are dry. Dry seasoned wood is lighter in weight than wet wood and makes a hollow sound when hitting two pieces together. If there is any green colour visible or bark is hard to peel, the log is not yet dry.
Do all chimneys have creosote?
Though the black residue in the chimney from burning wood is called creosote, it is in fact mostly tar. There are, generally speaking, three types of creosote are found in chimneys and they are usually called ‘stages’ or ‘degrees. ‘ All three forms are all combustible and should be removed.
