Table of Contents
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
How do I drain the water from my LG top load washer manually?
Press POWER to turn the washer on. Press the SPECIAL USE key until SPIN ONLY is lit. Press the START/PAUSE button to begin the cycle. The unit should begin a SPIN ONLY cycle and attempt to drain any remaining water that is inside the washer.
How do I get my LG washer to drain and spin?
For LG front load washers, turn the unit on and without touching the selector dial move to the spin speed selection button. Then press the button until you see your desired spin speed highlighted. Then press the Start button. The unit will drain any excess of water before it spins.
How do you drain a washer with standing water?
5 Easy Steps to Get Water Out of Your Washer Step 1: Power It Down and Turn Off the Water Supply. Start by powering down your machine. Step 2: See If You Can Drain the Drain Hose. Step 3: Check Out the Drain Pump. Step 4: Drain the Interior Manually If Needed. Step 5: Know When to Call a Professional.
Why is LG washer not draining?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
Why does my washer not spin or drain?
If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
Does Spin Cycle drain water?
What Does the Drain Function on a Washing Machine Do? It removes the water from the tub during the spin cycle. The washer pump forces water from the bottom of the machine into the drain hose. When the water reaches the bend in the hose, it goes out of the drain.
Where is the drain hose on a washing machine?
The drain hose is usually found on the back of the washer, along with two separate hoses for both cold and hot water supply. The drain hose carries wastewater out of the machine, while the hot and cold water supply hoses bring clean water in.
How do you manually drain a washing machine?
If not, follow these steps: Step 1: Turn off the power and lay down towels. Step 2: Locate the drain hose at the back of the washing machine. Step 3: Drain the water. Step 1: Turn off the power and lay down towels. Step 2: Locate the drain hose. Step 3: Drain the water. Step 4: Scrub the filter.
Where is the drain hose on LG front load washer?
Locate the access panel in the lower front of your front-load washer. Next, grab a shallow pan and have it ready by placing it near the access panel to collect the water. Open and remove the acces panel by pulling the tab downward and out, revealing the drain hose and drain pump filter.
How do I test my LG washing machine drain pump?
Test the drain pump. Press POWER to turn the washer ON. Press the SPIN SPEED key until HIGH is selected. Press the START/PAUSE button to start the SPIN ONLY cycle. Listen to hear a humming sound which indicates that the drain pump motor has started working.
How do I fix an unbalanced LG washer?
If the load appears unbalanced, consider adding or removing items to balance it out. Often, bulky or large items, like pillows and blankets, or sometimes small loads, can cause the washer to be off-balance. Consider adjusting the wash cycle’s settings or add or remove items to fix the issue.
Why is my LG washer always unbalanced?
SMALL LOADS: Because of the drum size, small loads will not distribute evenly around the drum causing an unbalance during the spin. Add items to help balance the weight of the load or reduce the spin speed to help prevent the unbalance.
How do I drain the water from my LG washing machine manually?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
How do I drain the water from my LG front load washer?
Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.
How do you force a washing machine to drain?
If not, follow these steps: Step 1: Turn off the power and lay down towels. For safety, unplug the machine. Step 2: Locate the drain hose at the back of the washing machine. Step 3: Drain the water. Step 1: Turn off the power and lay down towels. Step 2: Locate the drain hose. Step 3: Drain the water. Step 4: Scrub the filter.
Where is drain hose on LG front load washer?
One end of the drain hose is connected to the back of the washer, while the other end hooks into a drain pipe or nearby sink by means of a gooseneck- or elongated-U-shaped end piece. If you need to access the drain hose in an LG front-load washer, either for service or repair, you can do so fairly easily.
