Table of Contents
T1-11 is an exterior wood siding product made from plywood, wood composite or oriented strand board, which is a layered board made of compressed wood chips. If treated with chemicals that fight decay and rot, the siding will be noted as a treated wood siding product—an important requirement for outdoor use.
Is T1-11 better than plywood?
T1-11 Siding Explained T1-11 siding comes in two major grades: plywood and OSB, which stands for ‘Oriented Strand Board. However, the plywood version of T1-11 is far superior overall to the OSB version because of its greater durability and the variety of finishing options it offers.
Is T1-11 siding waterproof?
T1-11 siding is not waterproof because it is not treated with any resins and chemicals that repel moisture. T1-11 siding needs to be protected against the weather with primer, paint, or stain. You also need to caulk around doors, windows, joints, and nails to keep the water out.
Is T1-11 siding treated?
OSB T1-11 siding has more issues with water because of how it is manufactured. It is made with wood strands and flakes and is treated with a resin to bind it together when pressure is applied in the process. T1-11 will last and stay beautiful if adequately installed, painted or stained, sealed and maintained.
Is it better to paint or stain T1-11 siding?
Plywood T1-11 accepts stain well and takes on a grainy appearance that blends well in rural surroundings. Staining T1-11 is less work than painting it — you may need only one coat — but prior cleaning of the substrate is even more important, because any dirt and discoloration shows through.
Does T1-11 siding need Tyvek?
Do I Need Tyvek Under T1-11 Siding? T1-11 is both a siding and a sheathing and can be fastened directly to the exterior face of the studs. House wrap like Tyvek or tar paper provides a wind and moisture barrier which can be beneficial depending on the purpose of the structure it is used on.
What is better than T1-11?
It can stand up to harsh weather in any climate and resists damage from termites and fungal decay. How to Decide: If you want the most durable siding available, then LP wood siding is your better choice. If you want to sacrifice some durability for savings, then choose the plywood grade over the OSB T1-11.
How do you seal the bottom of T1-11 siding?
Trim the siding with one-by-four-inch wooden trim, covering the gaps around windows and doors, under the soffit and on the corners of the house. Nail the trim with two-inch galvanized nails, then caulk around it with acrylic latex caulk.
Can T1-11 be hung horizontally?
If you carefully read the instructions, you will not find any instructions that say it cannot be installed with the grooves horizontal. Rather, they only show it installed vertically.
Does T1-11 need to be sealed?
It is sometimes called T1-11. Plywood should be treated or primed before installation to ensure it is completely protected from the elements. Sealing the material is a fairly straightforward job if the siding you purchase is not green.
Why is it called T1-11?
Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects. T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The ‘T’ in T1 stands for “textured,” which references the grooves or channels cut into the siding.
How much is a sheet of T1-11?
T1-11 Plywood Costs Depending on the finish and size, this siding costs between $25 and $40 per 4 foot by 8 foot sheet. Add installation costs and construction materials, and you end up with a range between $3.50 and $7.20 per square foot.
Can T1-11 be stained?
T1-11 siding is wood or wood-based siding for homes. It’s made from either plywood or oriented stand board. You can paint or stain it to create a beautiful look for your home.
Can you make T1-11 look like board and batten?
T1-11 is often available with either a rough or smooth finish, which is important to consider when stocking up on project materials. In addition, this type of plywood is cut into practical panels, often with stylish exterior grooves that make board-and-batten and shiplap construction easy.
How do I fasten my T1-11?
T1-11 siding is designed for installation on framing with standard 16-inch spacing. You can attach them with exterior screws or galvanized nails. Wrap the house with house wrap or 15 mil tarpaper. Staple the material to the studs with a staple gun and cut openings for doors and windows with a utility knife.
What is Masonite siding?
Masonite was originally developed as an alternative to real wood, vinyl, and aluminum sidings. Made from a mixture of wood chips and resin, it has the look of real wood. It was intended to fill a gap for homeowners that dislike the look of vinyl but wanted something lower maintenance than wood.
Can T1-11 be used indoors?
Could your cabin containing T1-11 make you sick–absolutely. Could it be somethingelse such as a finish used or a sealer–absolutely. You have to isolate the products to be sure which is causing the issues and that can bechallenging, especially after it has been installed.
How long will T1-11 siding last?
T1-11 siding is a very durable siding material and can last for more than 20 years if it is properly installed, regularly maintained, sealed with quality paint or stain, and protected from water and mold damage.7 days ago.
Is LP SmartSide worth the money?
While LP SmartSide has a few disadvantages, overall, it’s an excellent siding choice for efficiency and aesthetics. All you need now is a siding contractor to help you install it.
