Table of Contents
Proper sidewall venting requires installing separate vent pipes horizontally so that they vent to the outdoors through a wall of your home. These ventilation pipes should be isolated from the furnace combustion chamber and made airtight to eliminate the possibility of combustion gas leakage.
Where do you vent a high efficiency furnace?
High-efficiency furnaces use sidewall vents for “breathing” in outside air for fuel combustion, and “exhaling” cooled exhaust gases nearly depleted of heat.
How far can you vent a high efficiency furnace?
The maximum vertical distance you can run a furnace exhaust vent is about 15 feet. If there is a forced air inlet within 10 feet of the exhaust vent, the exhaust gas ventilation terminal should be positioned at least 3 feet above it.
Can I vent my furnace out the side of my house?
If your furnace has an AFUE rating of 90 percent or above, it will have a flue pipe that goes out of the side of your house. That’s because the combustion byproducts are in a liquid form, so they need to be drained out of your home in a similar way that the condensation from your air conditioner is drained outside.
Does high efficiency furnace need outside air?
This goes to say that high efficiency furnaces have an inbuilt fresh air intake and do not use the air inside your home. They are designed to draw air from the outdoors. That said, you will still benefit from installing a fresh air intake as these intakes improve indoor air quality and also wick excess moisture.
Can high efficiency furnaces be vented vertically?
This system requires PVC piping for the air intake and the exhaust vents to be routed through the sidewall. Vertical venting that pre-exists is unsuitable for the exhaust this system does create.
Where are furnace vents located?
The air intake vent in the furnace is located on the side of your house. Many air intake vents are white or black plastic pipes. The intake vent can become an entryway for mice and other vermin.
Does you need cold air return with high efficiency furnace?
The architecture of high-efficiency furnaces means that they have their own fresh air intake. This means that they don’t use the air inside your home; rather, they draw air from outside. However, this doesn’t mean you don’t need an external fresh air intake because you’ve installed a 90% furnace.
Does furnace vent need to be sloped?
No , no slope is needed on the inlet. The exhaust is sloped to discharge or drain the moisture created in the combustion process.
Is it proper to vent a furnace out the side of a structure without a vertical rise?
The answer is YES and NO! An 80% efficient furnace CAN be side wall vented per National Fuel as Code 7.3. The combustion air flow through the furnace must be controlled or its efficiency will decline. The barometric damper will prevent pulling additional excess air through the furnace.
Can PVC be used to vent a furnace?
Traditional gas-fired, forced-air furnaces produce hot combustion exhaust gasses and therefore need metal vent pipes, or chimneys. In contrast, modern high-efficiency condensing furnaces exhaust much cooler gasses and need only plastic pipe materials—such as PVC, CPVC, or ABS—for their exhaust vents.
Can a high efficiency furnace vent through a chimney?
Furnaces with an AFUE of 90% and greater use special venting material such as PVC or stainless steel. A 90% furnace should never dump flue gases into a chimney. Using an abandoned chimney as a chase for a metal venting system, such as “B” Vent, can be done.
Does a gas furnace pull air from outside?
A high-efficiency furnace draws air from outside the home since it is very energy efficient. If you live in an area with cold winters, this will allow your furnace to get the air it needs without using too much energy, which will help keep your energy bills low.
Does a furnace vent outside?
A furnace vent is either a flue, draft fan or an external vent that is responsible for removing combustion gases from your furnace. Your furnace vent will expel the gas generated during combustion outside of your home, typically through the roof.
Does furnace fan bring fresh air?
This fan is wired to your furnace fan, so when the switch is turned on, it activates your furnace to circulate air which then brings fresh air into your home through your fresh air intake (a duct from the outside that goes directly into your ductwork).
Why do high efficiency furnaces use PVC pipe?
To combat this issue, high efficiency condensing furnace uses PVC pipes to extract the acidic water from your home. These are connected to the furnace and routed out to the side of your home. The venting system is installed at the same time as your high-efficiency furnace.
How do you vent a he furnace?
Proper sidewall venting requires installing separate vent pipes horizontally so that they vent to the outdoors through a wall of your home. These ventilation pipes should be isolated from the furnace combustion chamber and made airtight to eliminate the possibility of combustion gas leakage.
Do high efficiency furnaces produce carbon monoxide?
Many of the new super-high-efficiency gas furnaces (efficiencies above 90 percent) are also the safest. In addition to cutting your heating bills by 30 percent to 40 percent, their basic design and operation concept greatly reduces the possibility of carbon monoxide poisoning.
How do you tell if your furnace is venting properly?
How Do I Know If My Furnace Isn’t Venting Properly? Gas furnace fumes are moist, so if you notice “sweat” on your windows, this is a sign that your furnace isn’t venting correctly. When your furnace comes on in the morning, if it is venting into your house rather than outdoors, moisture will condense on the cold glass.
What is the vent on the outside of my house?
These vents allow outside air to circulate under the floor in summer to prevent the moisture buildup that encourages mildew and rot. In winter, when the air is drier, the vents are closed to reduce the chance that the pipes in the crawl space might freeze.
