Table of Contents
After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.
Can you pressure wash and stain a deck in the same day?
DPI Pressure Washing recommends you wait 72 hours following cleaning to stain your deck. Always inspect the wood before staining it. If you see moisture or some swellings still apparent in the fibers, wait another day or two. Remember that staining a wet deck will result in an uneven finish at best.
How long should wood dry before staining?
No matter the type of wood, we always recommend waiting 24-48 hours after rainfall or cleaning to make sure the structure is dry prior to staining. How to recoat a previously stained structure: If Wood Defender™ Oil Based Exterior Stains were used on the prior application, no stripping is necessary.
How long do I need to wait after washing my deck to stain it?
Always make sure the deck is clean and dry before you begin staining. Wait at least 24 hours after washing your deck to apply stain. Also, try to avoid staining your deck right before it rains. Most stains require at least 2-3 hours for drying.
How do you know if wood is dry enough to stain?
To determine if pressure treated wood is dry enough to stain, try the “sprinkle” test. Sprinkle water on the wood: if the wood absorbs it within 10 minutes, plan to stain as soon as possible. If the water beads or pools on the wood surface, the wood needs more time to dry.
What if it rains after I stain my deck?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
How long does it take wood to dry after pressure washing?
The deck will need a minimum of 48 hours to dry after the cleaning. If it rains, wait two more days for the wood to dry. Avoid staining in high heat, high humidity and in direct sunlight.
Can wood be too dry to stain?
Overly dry wood can be more brittle, meaning nailing, sawing, or other aspects of installing or woodworking can lead to splits, cracks, knot loss and other damage, particularly if working across the grain. Trying to carve or turn overly dry wood can also lead to more splintering on the surface.
What happens if I stain pressure treated wood too soon?
If you stain pressure-treated wood too soon, the stain will be unable to fully penetrate the wood, and you will not get the protective benefits of the stain. What is the best stain for pressure-treated wood? An oil-based stain is the best for pressure-treated wood.
Is it better to spray or brush stain?
Brushes waste the least amount of stain or finish. Only the amount that remains in the brush after you are done is wasted. Rags waste the amount of stain or finish that remains in the rag when you are done. Spray guns waste all the stain or finish that bounces back off the object or misses the object.
Should I power wash my deck before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
What temperature does it have to be to stain wood?
Most stains can be applied from about 50° F to 90° F — but many people don’t realize this range refers to the temperature of the wood surface, not the air. A day that’s 70°F and sunny can push deck surface temperatures above 90°F leading to application challenges and shortened open times.
Can you stain a deck in the evening?
The best time to stain your deck is either the spring or the fall. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. Extreme heat or sun can work against you when you are staining your deck.
Do you need 2 coats of stain on a deck?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain. Watch this video to see more tips on how many coats of stain to apply.
Can I apply a second coat of deck stain a week later?
Can I Apply a Second Coat of Stain a Week Later? No, applying a second coat of stain a week later is a bad idea. If you apply another coat of wood stain after a week, it will not adhere to the wood properly.
When Can I stain my fence after pressure washing?
It’s recommended to let your fence dry for at least 48 hours after pressure washing and before staining.
How long after power washing can you sand?
Sand Your Deck Before Sealing After you’ve pressure washed your deck, you’ll need to wait for it to completely dry. Sometimes, this can take as long as 48-hours. Once it’s dry, you’ll want to sand your deck lightly. This is necessary to remove any splinters or fuzzy patches that pressure washing can cause.
When should I stain my deck?
Many homeowners wonder, “How often should I stain my deck?” To keep a deck looking great and prolong the life of the wood, a deck should be stained every two to three years. Other signs your deck needs staining are: The deck has mold or mildew buildup. Water soaks into the deck boards and no longer beads up.
