Table of Contents
How do I clean a dirty pilot light?
Use your pliers or wrench to remove the pilot light and thermocouple from the bracket. Using the wire brush, brush away the carbon buildup and soot from both components. For hard to reach areas and stubborn buildup, use the metal file. Wipe away dust with a soft cloth or burst of compressed air.
Can a pilot light get clogged?
Like any appliances that use combustion, your pilot light can one day become clogged up with carbon residue and/or soot. This is why it is recommended to clean it periodically to keep it in a proper working state.
How do you clean the pilot on a gas stove?
Gently insert a thin wire or sewing needle into the pilot orifice, the holes in the ignitors and flash tubes as well as the burners themselves, agitating it slightly to dislodge debris. Use canned air to remove any remaining bits. Be sure to clean up any dislodged particles that have fallen below the burners.
Why is my pilot light yellow?
A yellow flame is caused by lack of oxygen and incomplete combustion. If the pilot light is a weak yellow flame it will not get hot enough to heat the thermocouple to the temperature needed to enable the gas valve to open. This is often caused by a dirty pilot tube tip.
Why is my pilot light orange?
If your pilot light’s flame is orange or yellow, it is burning inefficiently due to a lack of oxygen. The thermocouple should sense when this happens because the heat from the flame will not be as hot as it should be.
How do you fix a yellow pilot light?
If you notice that you pilot light is burning yellow instead of blue, contact Jerry Kelly. The issue can typically be fixed by cleaning out the air intake valve to the pilot light, which should only be done by a professional who knows how to access and repair the part.
What causes a weak pilot light?
Some of the reasons your pilot light keeps going out include: A poor pilot flame – low gas pressure or blocked orifice. A flame that is set too small. An insufficient supply of gas.
Why does my pilot light keep going out?
A faulty, misaligned, dirty, or damaged thermocouple is often the culprit behind your pilot light going out. The thermocouple is an automatic safety shutoff device that prevents the gas valve from opening if the pilot light is out.
How do you clean a gas thermocouple?
The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.
What is stove pilot?
In older gas stoves, a small light called a pilot should constantly be on. This tiny flame is used to light bigger ones on your stovetop burners and oven. When that happens, the burners and the oven will not ignite, which means you can’t cook your food.
Why does my gas stove leave black marks on my pots?
A gas stove might turn your pots black if it is not heating evenly or if the heat is turned up too high. If the flame is not heating evenly, you will notice that the flame is blue on the outside with a yellow core. If you see yellow, your air to flame ratio needs to be adjusted.
Does the pilot light stay on in a gas oven?
A pilot light is connected to a gas line, which keeps it continuously aflame. When the pilot light won’t stay lit, the gas may still escape from the pipe. Instead of feeding a fire, though, it goes into your home. Pilot lights have a safety valve, which should cut the gas when the light goes out.
Why is my pilot light red?
Your Furnace Needs a Cleaning Your pilot light should be bright blue, not red or yellow. A red or yellow flame indicates that your pilot light isn’t getting enough fuel.
Why is my gas flame yellow?
FLAME INDICATES EFFICIENCY A wavering, yellow flame on a normal gas burner indicates that the burner is out of adjustment or the air inlet is restricted. As a result, the burner may be producing excessive amounts of CO. However, the flames in burners that use fuel oil should burn with a clear yellow or orange flame .
What does a yellow flame mean?
A red or yellow flame is a flame being starved of oxygen, creating incomplete combustion. The flame will be at a much lower temperature and will seem more sooty. The yellow colour comes from the soot particles produced by the flame. This flame is dangerous as it produces more poisonous carbon monoxide gas.
