Table of Contents
Drain the water in the swamp cooler by opening the drain plug or siphoning with a hose. Brush the inside of the swamp cooler with a stiff-bristled brush or whisk broom. Use a wet/dry shop vacuum to remove the dust and dirt quickly. Pour the white vinegar into the water reservoir and allow to soak for an hour.
Can I use vinegar in my swamp cooler?
Clean. Add a cup of vinegar to the cooler pan and let the vinegar cycle through the system for up to an hour. This will eliminate odors, mold, mildew and some corrosion, calcium deposits and other types of build-up.
How do you clean mold out of a swamp cooler?
Step 1: Submerge the pads with lemon juice or Vinegar Step 1: Submerge the pads with lemon juice or Vinegar. Submerge them in a mixture of water and lemon juice for 30 -60 seconds. Note: Use Vinegar, but the smell can soak into your cooling pads and can be very difficult to remove. Step 2: Air dried cooling pad.
How often should you clean a swamp cooler?
For heavy use, it’s a good idea to give it a full cleaning three times a year: Once before you begin use in the spring, once in the middle of the season, and once at the end before you pack it away. You’ll also want to drain the tank and refill it with fresh water at least once a month.
Do swamp coolers need to be cleaned?
Swamp coolers provide cool air through water evaporation. This method of cooling saves more energy than using an air conditioner. You should clean your unit at least once each year.
Can you put fabric softener in a swamp cooler?
You should use fabric softeners or essential oils added to the water sparingly to avoid possible health risks or damage to your cooler. A little hydrogen peroxide can prevent problems before they start. Never attempt electrical repairs on your own; call a qualified professional.
How often should swamp cooler pads be replaced?
Cleaning your pads annually helps manage mineral buildup, makes the pads last longer, removes foreign matter (like cottonwood seeds) and improves efficiency. For Mastercool swamp coolers, you should clean the pads annually and replace them every 3-5 years.
What can I put in my swamp cooler to make it smell better?
Pour two or three drops of tea tree oil or grapefruit seed extract into the water in the swamp cooler. These substances will help neutralize offending odors and prohibit the formation of mold and mildew that can form within the unit. Tea tree oil is very effective but produces a strong aroma that may offend some.
How do you maintain a swamp cooler?
If you use a swamp cooler often during the hotter months, it’s important to clean it regularly: Always clean it before startup. Wipe down the exterior with a damp cloth every few weeks. Don’t clean the unit with any surface cleaners, chemicals or solvents – warm water is sufficient.
Why does my swamp cooler smell fishy?
The cooling pads, which are typically saturated with water to produce cooling, may have developed mold and / or mildew. When the system runs, it may be emitting this fishy or moldy smell, as a result. This is especially common if you have been running the swamp cooler constantly, and water has been continuously used.
How do you remove calcium deposits from swamp cooler pads?
#3 How to Remove Calcium Deposits from Swamp Cooler Pads The best cleaner is a simple mix of white vinegar and water. You should clean the water pan reservoir at the bottom of the cooling unit at least once a month throughout the season to prevent minerals from building up inside.
Can we put Dettol in cooler?
What to do if there is a bad odour coming from Air cooler? A: Best option is to drain water out completely & let the Air cooler dry for a day, but another solution is to add a 50 ml of dettol/ or any non corrosive disinfectant into water run it for 15 minutes & drain the water.
Can you put essential oils in evaporative cooler?
Many have bought into the idea of adding essential oils to make the machine and the air it produces to smell better. After cleaning the evaporative cooler, just spray the essential oil mixture into the machine and that will be all. Use your favorite essential oil to make your home or office space smell fresh and great.
What is the white stuff on my swamp cooler?
Mineral Buildup on a Swamp Cooler An evaporative cooler works by evaporating water in the air stream. If all of the water evaporates, the “stuff” in the water (minerals—calcium, magnesium, sodium) will be left behind. And evaporative coolers operating on “soft water” can leave a powdery white residue—sodium.
Should I use distilled water in my swamp cooler?
Or you can use distilled water — water that has been turned into steam and then cooled again to remove salts, calcium and other minerals. This is even better than filtered water for use in an evaporative cooler because of its total lack of hard-water minerals.
Can I use tap water in evaporative cooler?
A: Tap water is fine but it will build residue overtime. Just keep it clean on the inside.
How many years does a swamp cooler last?
But, while swamp coolers don’t cost much to buy, they are a lot of work and money to maintain. Not only that, they are only warrantied to work for 5 years. Refrigerated air systems can last up to 20 years if properly maintained.
How do I know if my swamp cooler pad is bad?
Signs to look for that indicate excessive wear and tear are a loss of thickness, rips, cracks and fraying edges. If you notice any of these signs, it’s likely time to replace the pad.
