Table of Contents
How do I connect my premier mp3 FM transmitter?
Plug your USB drive into the USB port (B) located on the back ofthe 2. Plug one end oithe 3.5 mm aux cable into the outlet on the car a“ transmitter. transmitter and the other end into the headphone port on your 2. Insert your SDIMMC card into the slot (A) located on the badr ofthe mobile device (Fig 1).
How do I connect my phone to FM transmitter?
On your Android device, open Settings > Connections > Bluetooth Settings and activate the Bluetooth option. Below this, wait for the screen to update and display your car audio system, selecting it to pair.
How do I change the station on my premier Bluetooth radio transmitter?
Thanks for your question: Long press the multifunction key until the LED display flashing. Choose channel in the car audio. Adjust the FM transmitter frequency to match the car radio FM channel. Connect phone bluetooth or insert the USB/TF card, FM Transmitter will start to play automatically.
How do I connect my Bluetooth FM transmitter to my car?
Enable Bluetooth connection on your smartphone. Making sure Bluetooth FM Transmitter is properly plugged into the cigarette lighter socket in the car. In your phone, under Setting select Bluetooth, a new Bluetooth device (Car Kit) will be shown. Select the new Bluetooth Device to pair with your smartphone.
What does a Bluetooth FM transmitter do?
A Bluetooth FM transmitter uses the low-power, short-range frequency to send and receive information using the radio waves. Once your phone is paired with car device and it will automatically allow you to use desired features, in this case the music.
How do I play music from my phone to my car through the FM transmitter?
Switch the audio system on and select the FM mode. Choose an FM radio frequency that is not used by radio stations in your locality, then match the frequency you had selected with your FM transmitter. On your smartphone, go to Bluetooth and pair your phone with the transmitter. Once done, you can now play your music.
How do I use my Samsung FM transmitter?
Insert FM Transmitter Module into the Socket which is located at the back side of TV 2. Push the menu button on Remote controller for TV and select FM Transmiiter on Sound Menu 3. Make FM Transmiiter Active 4. Tune the Frequency to what you wnat(Frequency Range: 8.1MHz~107.9MHz) 5.
Why is my Bluetooth transmitter not working?
To solve this issue, simply TURN OFF the source of interference when you are trying. to do the pairing process. Or you can take the transmitter and headphone to your car and pair them up there. Only a USB cable from car USB will be enough to power it up. Once paired, they should reconnect once both turned on again.
How do I change the frequency of my FM transmitter?
Change the radio station up/ down by short pressing “+|-” keys . Hold +|- keys to increase/ decrease the radio station quickly. Radio Station frequency is adjustable within 87.5 – 108. Example: If your car’s FM radio station is set to 107.7, set the transmitter to the same frequency (display should show “107.7”).
How do I tune my FM radio?
Tuning in an FM radio station manually (manual scanning) (ICD-UX543F/UX544F only) Select BACK/HOME – “ FM Radio,” and then press . The IC recorder enters the FM radio mode. Select the audio output either from “Headphones” or “Speaker.” Press or repeatedly to tune in a station. Press.
Where do you plug in a Bluetooth transmitter?
Bluetooth transmitters are usually plugged into the Audio Output Port on the Audio source such as your TV, Gaming Console or PC… And then “paired” with your Bluetooth Headphones or Speaker via Bluetooth, thereby transmitting the audio wirelessly.
How do you use a Bluetooth TV transmitter?
To add Bluetooth to your TV: Check if your TV has Bluetooth compatibility. Look at the audio outports on the TV. Connect a Bluetooth transmitter to an audio output port on the TV. After making sure the Bluetooth transmitter has power, put the transmitter and the receiver into pairing mode.
How do I connect transmitter and receiver?
Press the red button on the transmitter for 2 seconds. The LINK LED should start blinking on both transmitter and receiver units. After they blink for 5 seconds, they will pair.
How do I use the FM transmitter in my car mp3 player?
EASY TO USE – Just plug the Wireless Audio Bluetooth FM Transmitter in the car cigarette lighter, set it and the car radio at the same frequency (On the FM Transmitter, Press and Hold the (MULTI-FUNCTION KEY for 5 seconds until it starts to blinking) to Select frequency range from 87.5 – 108 Mhz).
How do I connect my FM transmitter to my sound system?
Power on the car stereo. Turn the volume down on the car stereo. Set the car stereo to FM.To install the transmitter, follow the steps below: Rotate the Frequency select dial to select the same frequency that you set on the car stereo. Connect the stereo mini plug to the headphone jack on the portable audio device.
How do I set my car radio frequency?
Follow these steps to tune the radio station on your car stereo. Press the SOURCE, HOME, or MODE button on the Main unit of the car stereo, and then select radio or Tuner. Select band (AM or FM). To tune automatically, touch the SEEK- or SEEK+ button on the Main unit or Screen display.
