Table of Contents
How hard is it to install a clawfoot tub?
Clawfoot tubs are difficult to install A traditional clawfoot tub is made of cast iron with a porcelain finish, according to Boston Standard Plumbing. The floor may have to be reinforced before installation of the tub begins because of the tub’s weight (an empty cast iron tub weighs 200 – 400 pounds).
How much does it cost to install a clawfoot tub?
The national average cost range is $2,300 to $4,100 for an installed clawfoot tub. Most homeowners pay $2,850 for an installed cast iron, roll top tub.Clawfoot Tub Installation Cost. Clawfoot Tub Prices National average cost $2,850 Average range $2,300-$4,100 Minimum cost $900 Maximum cost $5,800.
How do you anchor a clawfoot tub?
Place tub in intended position on floor. Mark foot anchoring locations on floor with pencil. Move tub to the side to allow work space. Drill starter holes in floor. Put tub back into position. Place flat washers on lag bolts. Put lag bolts through slot in bottom of foot and screw into floor using wrench or socket.
How much does a cast iron claw foot tub weigh?
How heavy is a clawfoot tub? All bathtubs are heavy, but clawfoot tubs tend to be especially heavy – particularly the cast-iron models. A cast-iron tub can easily weight 200-400 pounds while empty – fill it with water and climb in and you’re looking at several hundred pounds of weight.
How far should a clawfoot tub be from the wall?
The Magic Number: 6 Inches As a rule of thumb, the minimum end-to-end (length) additional space you’ll need for a clawfoot, pedestal, or freestanding tub is 6 inches. Any less and the tub will look cramped in the space.
Does a clawfoot tub add value to a home?
According to the RealEstate.com survey, starter homes with claw-foot tubs sold for nearly 30% more than expected. Coffered ceilings also helped homes sell for 30% more than expected, and farmhouse sinks (thanks Joanna Gaines) helped homes sell for 26% more than expected.
Will a clawfoot tub crack tile?
Will a clawfoot tub crack tile? Tile floors, especially porcelain, are very durable and will not break under heavy weight but they can scratch. Tile flooring is ideal for supporting a heavy bathtub at full capacity.
Where do clawfoot tubs drain?
Source and drain lines come through the floor. In a typical clawfoot tub installation, both the water source pipes and the drain pipe enter the bathroom through the floor.
Can my floor support a cast iron tub?
In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem. Larger cast iron bathtubs may require more joist or subfloor reinforcement for the tub to be safe to use.
What can I put under my clawfoot tub feet?
A small circle of leather or felt placed beneath each claw foot will prevent it from scratching. Or you can glue these materials to the bottom of large claw feet and cut their shape to fit the foot, making a protector that’s less visible from the sides.
How do you stop a clawfoot tub from moving?
Carefully set the tub back into position and adjust the feet adjusters as necessary. Once level, apply a generous bead of silicone on the bottom of the feet. This will prevent the tub from shifting after installation.
What size shower curtain do I need for a clawfoot tub?
Benna Crawford at Hunker says that while the industry standard for shower curtains is 72 inches by 72 inches, it may be that you require a custom shape for your antique clawfoot. Custom curtains for freestanding tubs should be about 180 inches wide so they can encircle the entire tub — if that’s what you’re going for.
Are clawfoot tub feet universal?
Here is a set of Clawfoot tub replacement feet that will work on most tubs manufactured within the last 100 years. These Lions paw styled, universal replacement clawfoot tub feet will be sure to add a stunning element of class to your bathroom.
How do you pick a clawfoot tub?
Traditionally, clawfoot tubs are white, but nowadays they come in a variety of colors. Choose a hue that complements your bathroom’s palette or make a real statement with a bold, vibrant shade. Another important decision is to decide on the type of feet you prefer for your clawfoot type.
Can I put freestanding tub against wall?
Freestanding tubs are normally not installed against a wall. Although the first thing any bathroom designer should consider is where they will put the shower. Once you have the location of your shower picked out, then you will have a better idea of where you should install your freestanding bathtub.
How much space should be between vanity and freestanding tub?
Professional Recommendation. When deciding on placement, make sure there is at least 30 inches of floor space between the vanity and tub. The National Kitchen & Bath Association recommends a minimum of 30 inches of clear floor space alongside a tub.