Table of Contents
Positioning your niche at chest to eye-level is a good standard. This translates to a height of about 48 to 60 inches. Ideally, you’ll want to position your niche to fit between the studs which are usually located 16 inches apart. But many contractors can help you with planning the space for a more custom look.
Where should a shower niche be placed?
For this reason, the wall opposite the shower head is the most popular place for shower niches. Regarding shower niche height – if it’s a regular stand up shower, a placement height above the waist (approximately 3 feet from the shower pan/base) would be most convenient for reach.
What is the standard size of a shower niche?
Assuming that you are considering installing a prefab tile ready foam board shower niche, the most popular standard shower niche size is 12″ wide x 28″ high x 3-1/2″ deep. This is based on sales volume of the biggest brand of prefab foam shower niches*. The second most popular size is their 12″ x 12″ niche.
How high should a shower cubby be?
The ideal height of a shower niche is at chest to eye level when standing. However, that’s strictly related to the height of each individual person. On average that usually means a height of 48 to 60 inches (120-150 cm).
How tall should a horizontal shower niche be?
Realistically, most people will want a shower niche to be between 36 to 60 inches (91 to 152cm) from the floor, which makes it a comfortable height to reach for a bottle of shampoo or a bar of soap.
Does a shower niche have to be centered?
I see no reason it needs to be centered. I would put it either on the same wall as the shower head, or on the back wall near the corner, to keep it out of the shower spray.
How much slope does a shower niche need?
The proper slope is 1/4 inch per foot so about 1/8 total for a niche.
Should I tile the niche first?
This ensures any splashing or accidental spraying of water on the wall or shower door does not result in any seepage and water damage behind the tiles. If the niche needs to be tiled, then it has to be done tile by tile. If the shower niche is large enough in height to add an additional level or compartment, go for it.
How high should a shower bench be?
As a general rule of thumb, the standard shower bench size is 17 to 20 inches high with a depth of between 15 to 16 inches. This will have any length needed to fit the shower wall and be able to sit comfortably.
How high should a niche be above a tub?
The ideal height for a bathtub shower niche sits at chest to eye-level when standing — a height of around 48 to 60 inches, as this height suits most adults. Set aside a 12-by-24 inch space between studs to hold shampoos, rinses, scrubbers and razors.
How high should a shaving niche be?
As a rule of thumb, the best height to install a shower niche is 1200mm from the floor. This puts your shower products at just the right height to grab and use easily.
Can you put shower niche on exterior wall?
The only good place to install one would be on an exterior wall which would leave a big gaping hole in the home’s insulation. To rule out an exterior wall for a shower niche can sometimes mean that you just can’t put one in a shower.
How do you waterproof a shower niche?
Waterproof Shower Niche To waterproof a tiled niche, apply waterproof backerboard to the inside surfaces of the niche. Next, apply waterproof membrane, bedding it in unmodified thinset. With the waterproofing complete, install the tile starting with the bottom of the niche, which should have a slight pitch for drainage.
How far should shower head be from wall?
Typically, a wall-mounted or fixed shower head should be about 3 to 4 inches from the wall. If you angle the shower arm at 100 or 120 degrees, you’d have enough space to move around your bathing enclosure without bumping against the wall.
Should a shower niche be sloped?
You want enough slope in a niche to evacuate water without throwing out your shampoo bottles. You’re talking about two different planes when it comes to shower curb tops. A top can be tilted front-to-back to evacuate water, yet still be level side-to-side.
Does a shower niche need a lintel?
Whether the 600 mm is the vertical or the horizontal it does not matter the brickwork above will need to be supported, it is fair to say that you could remove the brick to create the niche and the brick above would not move, however over time it will, so please insert a lintel.
How much slope should a shower bench have?
Slope of Shower Seat Design a built-in shower seat to slant toward the drain at a 5-degree (approx. 3/16″ to 1/4″) slope so water flows off the seat and into the drain.
How do you frame a niche in a wall?
How to Build a Wall Niche 1 Lay Out Niche. Determine that the wall you’re cutting into is not a load-bearing or exterior wall. 2 Cut Deeply Into Wall Studs. 3 Finish Cut with a Reciprocating Saw. 4 Rip-Cut Frame Boards to Width. 5 Assemble Niche Box. 6 Trim Out Niche. 7 Fasten Niche Box.
