Table of Contents
: to reduce or break up from a flocculent state : convert into very fine particles : disperse or maintain in a dispersed state.
What is the other name for Deflocculation?
What is another word for Deflocculation? flocculation. deflocculation and flocculation. coagulation. deflocculation and coagulation.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
Is Epsom salts a Deflocculant?
Epsom salts are my flocculant of choice. To use Epsom salts as a flocculant, the salts need to be dissolved in water. This breaks up the bond between the magnesium and the sulphate so the magnesium ions are free to attach themselves to the clay particles.
What is the difference between flocculant and coagulant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
How does vinegar affect clay?
The acidity of the vinegar breaks down the clay a bit, and makes it sticky. Some artists use vinegar straight from the bottle, or add vinegar to clay instead of water to make a joining slip. All these methods work to create a join that is stronger than water or slip alone.
What is the purpose of jar test?
A laboratory procedure that simulates coagulation/flocculation with differing chemical doses. The purpose of the procedure is to estimate the minimum coagulant dose required to achieve certain water quality goals.
Why do Flocculated particles not cake?
Repulsive forces between particles are overcome and a hard cake is formed which is difficult, if not impossible, to redisperse. The sediment is loosely packed and possesses a scaffold-like structure (large volume of final sediment). Particles do not bond tightly to each other and a hard, dense cake does not form.
Why is it important to treat drinking water by flocculation?
Flocculation-Chlorination The combination of particle removal and disinfection appears to produce high removal rates of bacteria, viruses, and protozoa, even in highly turbid waters. There is considerable evidence that the system has reduced diarrheal disease significantly in various locations.
What are the common coagulants?
The commonly used metal coagulants fall into two general categories: those based on aluminum and those based on iron. The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate.
Why is it important to treat flocculation in water?
While coagulation can remove particles and some dissolved matter, the water may still contain pathogens. It is, however, an important primary step in the water treatment process, because coagulation removes many of the particles, such as dissolved organic carbon, that make water difficult to disinfect.
What chemicals are flocculants?
A flocculants are usually organic chemicals added to wastewater to enhance flocculation, such chemicals are alum, aluminium chlorohydrate, aluminium sulphate etc.
What are the side effects of alum?
Side effects of Alum The excessive amount of alum intake may cause breathing difficulty, facial puffiness, pricking sensation & small ulcers on the skin, chest/throat tightness, and burns rarely seen in some cases.
How does a flocculant work?
A flocculant is a chemical that can be added to the water to help colloids and any other suspended solids bind together and form heavier particles. The heavier particles then settle to the bottom of the container/tank and the water on the top is drained off.
What is the test used to select the type of coagulant required?
What is the jar test? A laboratory procedure that simulates coagulation/flocculation with differing chemical doses. The purpose of the procedure is to estimate the minimum coagulant dose required to achieve certain water quality goals.
Is Redisperse difficult?
The repulsive forces between individual particles allow them to slip past each other as they sediment. The slow rate of settling prevents the entrapment of liquid within the sediment, which thus becomes compacted and can be very difficult to redisperse.
What is Deflocculation suspension?
A state of colloidal suspension in which the individual particles are separate from one another, this condition being maintained by the attraction of the particles for the dispersing medium (for example, hydration) or by the assumption of like electrical charges by the particles, thus resulting in their mutual
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What are suspending agents?
: a substance (such as carrageenan, xanthan gum, or cellulose ether) that is added to fluids to promote particle suspension or dispersion and reduce sedimentation All these drinks can contain preservatives, and drinks other than juices can contain additives to colour, flavour and sweeten.
Why does my clay smell?
When clay is stinky, though, it’s usually good, since that smell only comes when the clay has spent some time in the wet condition. If your clay stinks, that’s a good thing. It means there’s bacteria in it, living on the organic matter in it.
Is Vinegar a Deflocculant?
Vinegar is often used in ceramic slurries to change the viscosity (thicken it). While there are more effective flocculants (e.g. calcium chloride, epsom salts), vinegar is popular among potters simply because it is so available.
What happens when alum is mixed with water?
Aluminium Sulfate, Shortly known as Alum, when added to raw water reacts with the bicarbonate alkalinities present in water and forms a gelatinous precipitate. This floc attracts other fine particles and suspended material in raw water, and settles down at the bottom of the container.
Why is flocculation important?
Used water can contain significant amounts of suspended particulate matter, which often takes long to sediment. Flocculation expedites sedimentation and ensures efficient solid/liquid separation.
How much alum do I put in my water?
Make an alum solution by adding 7.5 grams of alum to one liter of tap water.
What can be used as a flocculant?
The following natural products are used as flocculants:
- Chitosan.
- Isinglass.
- Moringa oleifera seeds (Horseradish Tree)
- Gelatin.
- Strychnos potatorum seeds (Nirmali nut tree)
- Guar gum.
- Alginates (brown seaweed extracts)
What does flocculant mean?
noun. a chemical for producing flocculation of suspended particles, as to improve the plasticity of clay for ceramic purposes.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
