Table of Contents
Trex Select is a wood-plastic composite capped with a proprietary layer of material with a wood-grain finish. It’s available in four colors: redwood, grey, light brown, and deep brown. Decking is 51/2 inches wide and comes in 12-foot, 16-foot, and 20-foot lengths.
How wide is a Trex decking board?
The boards are 0.75 inches thick and 11.375 inches wide. The Grooved Edge board is 1 inch thick and 5.5 inches wide. It is available in 12, 16 or 20 foot lengths.
How wide is a composite deck board?
How wide are composite deck boards? Deck boards from popular composite decking brands such as Trex, DuraLife, and Deckorators usually measure in at 5-1/2 inches wide.
How wide is a Trex?
Tyrannosaurus Rex was 40′ (12.3 m) in length, with a height of 17′ (5.2 m), width of 6′ (1.8 m), and hip height of 12′-13′ (3.7-4 m).
What is the gap between Trex boards?
All deck boards must always be installed with a 6mm side-to-side gap. The Trex Hideaway Hidden Fasteners automatically measure the 6mm gap between grooved edge boards but you must still ensure the 6mm gap with the square edge boards.
What is the width of a decking board?
Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect.
Does Trex decking need to be spaced?
You must gap Trex® decking, both end-to-end and width-to-width. Gapping is necessary for drainage and the slight thermal expansion and contraction of Trex decking boards. Gapping also allows for the shrinkage of the wood joist system.
How wide are TimberTech deck boards?
The TimberTech AZEK Vintage Collection features innovative Multi-Width Decking, which offers boards in narrow (3.5”), standard (5.5”), and wide (7.25”) widths. Choosing your deck board width is mostly an aesthetic choice.
How wide is TimberTech?
Featuring a distinct, wirebrushed, low-gloss texture, and six dynamic colors, TimberTech AZEK’s Vintage Collection now comes in three widths: narrow (3 1⁄2”), standard (5 1⁄2”) and wide (7 1⁄4”).
How wide is Trex fascia?
Specifications Colors Gravel Path, Havana Gold, Island Mist, Lava Rock, Rope Swing, Spiced Rum, Tiki Torch, and Vintage Lantern Lengths Available 12 ft Nominal Dimensions (width x thickness x length) 12 in x 1 in x 12 ft Actual Dimensions (width x thickness x length) 11-3/8 in x 0.56 in x 12 ft.
How wide is Trex decking with hidden fasteners?
A: The Trex Hideaway hidden fastener will automatically create a 1/4” space between each decking board. Q: What size gap between the boards? A: The Trex Hideaway hidden fastener will automatically create a 1/4” space between each decking board.
How many Trex boards do I need for a 12×12 deck?
(Choose from 8, 12, 16, or 20 ft board lengths. Choose which board best fits the dimensions of the deck.Decking Materials. Board length Boards required 8 FT 206 12 FT 137 16 FT 103 20 FT 83.
How far apart are joists for Trex decking?
Most composite and PVC decking brands, like Trex and Azek, recommend a maximum joist spacing of 16 inches OC.
How do you stagger Trex decking?
“Stagger your boards so their ends are in different spots.” Slide the next board in so it’s parallel to the first. The sliding motion is important, as you want the spacer to fit in the groove of this board, too. Basically, you’ll have two boards with the spacer between them.
How wide is a 6 inch deck board?
Lumber sizes are usually given in “nominal” measurements. The nominal measurements are a board’s size before it has been planed smooth (surfaced) on all 4 sides.Dimensional Lumber. Nominal Size Actual Size 6×6 5-1/2″ × 5-1/2″.
How many deck boards do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists. 20 fasteners x 26 (number of rows of decking) = 520 fasteners. Add 10 percent to be safe.
What is the actual width of a 5 4 deck board?
5/4 Decking Actual Dimensions 1″ x 5.5.” If you use 5/4 decking, you are getting two-thirds of the board of a 2×6.
How many stringers Trex steps?
Composite deck stairs are typically made from 2 x 12 pressure-treated stringers spaced about 8 to 16 inches apart. They rest on a solid foundation and are attached to the deck with hangers. They have risers (also called toe kicks), treads and railings. Stairs should be at least 36 inches wide.
How do you cover the ends of Trex decking?
Composite decking ends can be finished by picture framing, raised fascia board, painting the ends, attaching decking veneer, composite nosing strips, vinyl stair nosing cove, composite corner trim or plastic end caps.
What decking boards are widest?
Wider than other composite decking boards Our new EvoDek+ Grey boards have a width of 158mm, making them noticeably wider than most other composite decking products.
What is the widest composite decking?
Do Decking Differently Standard-width decking is not the standard anymore. You can now choose wide (7.25″) or narrow (3.5″) widths, in addition to standard (5.5″)-width boards, to add a touch of the unexpected – and an element of style.
How wide are AZEK deck boards?
Superior technology allows for unique design options including a wider width (7.25″) deck board and a narrow width deck board (3.5″) in addition to the standard width (5.5″) deck board. Natural hardwood visuals achieved through the most advanced technology.
Does Trex make 2×4?
Trex Transcend 2×4 and 2×6 Lumber 2x composite boards to match Trex Transcend decking for railings and special applications. Shell covers top and sides (3 sides) 16′ length.
