Table of Contents
Keep in mind that shower drain assemblies are generally made to fit a 2-inch drainpipe, not the 1 1/2-inch pipe usually found on tubs. A 2-inch pipe is the recommended size because showers have a low threshold for flooding, and a 2-inch pipe helps the water drain faster than does a 1 1/2-inch pipe.
Can I use 1.5 inch pipe for shower drain?
Current plumbing codes (IPC as well as MA Plumbing Code 248 CMR 10 for instance) need 1.5 inches to drain for a tub with a shower. The tub can drain at leisure and the shower function when in utilize, with flow-limiting showerheads, fall within the flow rate that a 1.5” drain can handle.
What size PVC pipe is used for shower drain?
The 1½-inch size is used to capture water that might flow out of a kitchen sink, a bathroom vanity or a tub. The two-inch pipe is commonly used to drain a shower stall or washing machine, and it may be used as a vertical stack for a kitchen sink. A three-inch pipe is what’s used in homes to pipe toilets.
Can a shower drain be 3 inch?
The majority of shower drainpipes are two inches in diameter, but if you have two-inch drains and you run into a three-inch drainpipe, you’ll be making another trip to the plumbing supply store. With a two-inch drainpipe, the body of the drain fits over the pipe; with a three-inch pipe, it fits inside.
What size is bathtub drain pipe?
Down the Drain According to Bonnets Stems and Accessories, Inc., a standard modern bathtub drain is 1 1/2 inches in diameter – the width straight across the middle. Rough-in plumbing should be calculated for a 1 1/2-inch pipe.
Can a tub and shower share the same drain?
Yes, they will both be using the same drain pipe at somepoint inside or outside of your house. But the the pipes must join well below the level of both items or the pipe must be large enough for the combined flow, otherwise when you put water down one of them, it will flow out of the other!.
Are shower and tub drains the same size?
Shower and tub drains usually have different drain connection sizes to accommodate the various pipe sizes of your home’s plumbing drain system. A shower tub drain generally has a 2-inch drain connection, while a tub drain frequently has a 1 1/2-inch drain connection.
What size is main drain line?
Sewer drains from laundry sinks or washing machines are 2 inches in diameter and those from sinks in the kitchen, bathroom or powder room generally use a 1.5-inch pipe. The main sewer pipe leading to the septic tank or public sewer is usually 4 inches.
What size should plumbing pipes be?
In most cases, the main pipeline from the street to your home is either 3/4 or 1 inch in diameter, supply branches use 3/4-inch-diameter pipe, and pipes for individual components are 1/2 inch. Remember that water pressure decreases by a half-pound per square inch for every foot pipes extend above your water supply.
How much slope does a shower drain need?
In a stall shower, the plumbing code requires the floor to be sloped one quarter (1/4) of an inch per foot in order to carry the water effectively to the drain. This slope, according to the TCNA Handbook is called “sloped fill” or commonly known as the pre-slope.
How far can P-trap be from shower drain?
The maximum distance between the shower drain and the P-trap is 5 feet. However, the P-trap should be as close to the shower drain inlet as possible. You should even have the P-trap directly under the shower drain for the best results.
Does shower drain need vent?
It’s easy to forget, but it’s a vital and required part of any plumbing fixture drain. The vent pipes remove sewer gases while allowing air into the system to help the water drain. Without a vent, your shower won’t drain correctly.
Can a shower drain be connected to a sink drain?
Yes, the drain for the shower and the sink can be the same. The shower and sink can use the same drain pipe if it is well below the sink and shower level.
What size pipe is used for sink drain?
Some older sinks may have drains that connect to a 1 1/4-inch tailpiece, but most modern drains have a 1 1/2-inch outlet. All the pipes that connect to the tailpiece, including the P-trap assembly and all the horizontal extensions, are either 1 1/4 or 1 1/2 inches in diameter.
What is standard bathroom sink drain size?
While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard, with widths of 1.5 inches and 1.625 inches also common. The size of the hole helps determine which size drain is needed for that particular sink.
What size pipe is used for toilet drain?
The standard size of a toilet drain pipe is 3 inches in diameter, but the drain can be up to 4 inches in diameter. The drain pipe is usually connected to a 3-inch schedule 40 toilet drain pipe.
