Table of Contents
Do stock tank pools need a filter?
Just like with a typical above-ground pool, a DIY stock tank pool requires a filter pump to keep water circulating and to filter out debris. You’ll also need a threaded inlet strainer assembly, which connects the hoses and prevents large debris from entering the pump.
How do you filter a stock pool tank?
Can you put a filter in a stock tank pool?
A few notes: The 1,500 gph filter pump comes with one through-fitting for the outlet into the pool, so you’ll need to buy an inlet strainer fitting which is listed below from the Stock Tank Pool Store! Both through-fittings require a 2 3/4” hole through the pool, so be sure you have a hole saw with arbor.
How do you keep stock tank pools clean?
Can a stock tank pool be salt water?
Technically yes you can. Our DIY tutorial uses a different pump, so you will have to figure out how to attach the salt water pump to your stock tank, but yes, it can be done. Saltwater is pretty corrosive to metal and therefore do not recommend this option. How big is your stock tank pool?.
Does a stock tank pool need a pump?
A pool pump is a must. It will filter out debris and keep the water circulating. Without it, you’ll have 700 gallons of sitting water for mosquitos and bacteria to feed on, which can be dangerous to your health.
How do you keep a stock pool tank from rusting?
To prevent rusting and corrosion, seal the inside of the water tank before use with a rust-proof agent like a rubber coating (e.g., Flex Seal, available on Amazon) or truck bed coating spray (e.g., Rust-Oleum Automotive, available on Amazon).
How do you clean a galvanized stock tank?
Aside from differences such as shape, size, and whether it’s plastic or galvanized, stock tanks require regular cleaning. To make it simple, pull the plug (if there is one) and drain your tank. Then take a stiff bristled brush to the inside along with a mixture of bleach and warm water.
How do I get rid of algae in my stock tank?
Common, unscented household bleach also works as an algaecide. By adding 2-3oz. of bleach per 50 gallons of water, producers can reduce algae problems in livestock watering tanks.
How deep is a stock tank pool?
Stock tanks are typically 24 inches deep. They are available in diameters from two feet all the way to 10 feet, but Attal says the eight-foot model is popular for pools. This size holds about 800 gallons of water.
Do stock tank pools get hot?
“However, even our customers in Arizona, California, and Nevada who use our stock tanks for pools report that they don’t get too hot to use.” Remember, the metal conducts heat and cold, so the tank will cool down a lot overnight.
What chemicals do you need for a stock tank pool?
What Chemicals & Equipment Do I Need? We have opted for chlorine for our pool, but you can use salt water or bromide — all will work. If you are going to keep your pool full for more than a day or two, however, you will want to treat the water.
Can you use chlorine in a stock tank pool?
1) Floating chlorine dispenser (plus 1” tablets) Chlorine tablets are the key to keeping unwanted algae, scum, and bugs from crashing your stock tank pool party. For an 8′ stock tank, I recommend using 2 tablets each week during the height of summer (any more and you’ll risk compromising the galvanized zinc coating).
Why is my stock tank pool cloudy?
There may be low free chlorine levels. If your cloudy pool has an overwhelming chlorine odor, there may be less free chlorine than there should be, and the water isn’t getting sanitized. If so, the pool will need a shock treatment.
Can you put a pool pump on a stock tank?
There are so many pool pumps you can use your DIY your own stock tank pool. If your pump came with one of these pieces already, you’ll only need one kit/box! If it came with ZERO threaded inlet/outlet pieces, you will need 2 or the combination of the white one we use in this video along with a plunger valve.
