Table of Contents
While you now know that Eaton breakers, Westinghouse breakers, Square D breakers, and Cutler-Hammer breakers are largely compatible, you still need to find the exact models you need for your facility.
What kind of breakers are compatible with Cutler-Hammer?
What Breakers are Compatible with Cutler Hammer? Low Voltage Circuit Breakers. Medium Voltage Circuit Breakers. High Voltage Circuit Breakers. Thermal Circuit Breakers. Magnetic Circuit Breakers.
Will Square D breakers fit Cutler-Hammer panels?
Both of the breakers were able to fit. If the model number is listed by the box, it’s acceptable.
Is Cutler-Hammer and Eaton the same?
The Cutler-Hammer name and logo remain registered trademarks of Eaton Corporation. It’s the power of uniting some of the world’s most respected names brought together as One Eaton, to build a single brand you can trust to meet every power management need.
Are Square D and Eaton breakers compatible?
Eaton’s UL classified breakers are designed and tested to be both mechanically and electrically interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D. Video Player is loading.
Which breakers are interchangeable?
Specified breakers are breakers that have been tested and listed for a panel by the manufacturer. Interchangeable breakers are breakers that have been tested in the panels that they are approved for and are similar to specified breakers, typically by a third party such as Underwriter’s Laboratory (UL).
Will a Eaton breaker fit a GE panel?
TLDR: They’re all wrong. Swap with a GE or classified breaker (e.g. Eaton CL not BR).
What breakers fit in a Square D panel?
Square D QO breakers are compatible with QO breaker boxes and CSEDs. Each ANSI-certified and UL-listed. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class.
Are Eaton circuit breakers compatible with Cutler-Hammer?
Find Old and Obsolete Eaton and Westinghouse Breakers While you now know that Eaton breakers, Westinghouse breakers, Square D breakers, and Cutler-Hammer breakers are largely compatible, you still need to find the exact models you need for your facility.
Is Cutler-Hammer still in business?
Today, Eaton Electrical manufactures electrical distribution and control products branded “Eaton” or “Cutler-Hammer” which can replace Westinghouse products in commercial and industrial applications. Eaton spun off its semiconductor manufacturing equipment business as Axcelis Technologies in 2000.
Is Cutler-Hammer discontinued?
CUTLER HAMMER C316FNA3H 3-Pole, 1.7-2.4 A, Discontinued by Manufacturer, Thermal Overload Relay.
What is the difference between Eaton Br and Cl breakers?
The Eaton CL line includes some neat breakers that don’t really exist natively, such as their remote control breakers, and AFCI or GFCI for the obsolete panels they fit. The Eaton BR line is actually UL-listed as dual Type BR and C, meaning it is natively listed (not classified) for Challenger panels.
How many receptacles can be on a 20 amp circuit?
The answer to the question how many outlets on a 20 amp circuit is ten outlets. Always comply with the 80% circuit and breaker load rule, allowing a maximum load of 1.5 amps per receptacle. Remember that your circuit, wire sizes, and outlets must be compatible to avoid overheating and electrical hazards.
Can I use Square D breakers in a Siemens panel?
No, the Square D breaker should not be installed in the Seimens panel and checking the label should show you that this is not recommended.
How do you know if a breaker is compatible?
If you open the door of your service panel and look on the inside cover of the door, there should be a label that specifies the types of breakers to use with the panel. Note that the model or series of breakers for the branch circuits may differ from the model specified for the main breaker or service disconnect.
Can I mix breaker brands?
Brand: Always install the correct brand of breakers in your breaker panel. While some breakers are interchangeable, many are not, even if they look the same. Replacing one brand of breaker with another can be dangerous, may void your breaker or panel warranty, and may lead to a failed electrical inspection.
What breakers fit General Electric?
Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible. Match the size and voltage requirements when using Siemens breakers, as using the wrong breakers can have dangerous results. If the wrong breaker is used it could fail to break (shut off power) during a surge.
What breakers fit a Thomas and Betts?
This handy chart seems to show that the Eaton CL230 breaker is a “Classified” replacement for the Thomas Betts TB230 breaker. Since this is a pretty common breaker sold at national big box home improvement stores it should be straightforward to compare the two.
Are Murray and Eaton breakers interchangeable?
They are physically interchangeable with Murray and other brands, but remember to check your local code to see if it’s legal to install. Not all breakers that fit in your panel are legitimate and trusted. The three products, as mentioned earlier, can replace Murray.
What breaker is compatible with Siemens?
The Siemens QP, QT, QAF, and QPF are the standard “interchangeable” plug-on type breakers used in loadcenters under several brand names including Siemens, Murray, Gould, and Sylvania to name the most common.
Can you use other breakers in Square D panel?
Manufacturers like Square D warns against the use of Classified and interchangeable breakers. They site the National Electrical Code (NEC) Section 110-3(b), which states that using breakers not listed or labeled is a code violation.
