Table of Contents
Is it cheaper to build a log splitter?
As with many of these DIY log splitters, you might have to spend a little cash for the basic components, but when you consider that buying a log splitter can cost upwards of $1,000, constructing a machine such as this is still a very economical alternative.
What’s the average price of a log splitter?
The lowest price is for a hydraulic log splitter that will cost you just $649.99, while their most expensive product is a high-end Deluxe hydraulic splitter that costs $1,999.99.
How much force does it take to split wood?
The species of the tree is a strong determinant of the pounds of force needed to split your logs. For example, an Oak tree log requires 1350 pounds of pressure to split, based solely on its level of hardness.
How do I increase the power on my log splitter?
How to Adjust the Pump Pressure on a Log Splitter Start the engine on your log splitter as you normally would. Set the pump lever in the neutral position. Twist the screw on the side of the pump clockwise with a flat blade screwdriver to increase pressure, according to the scale printed or embossed on the side.
Is a 25 ton log splitter big enough?
You’ll find gas log splitters with well over 30 tons of driving force, but 25 tons is about average. That’s enough to split logs up to around 24 inches in diameter.
What size hydraulic pump do I need for a log splitter?
This 16 gallon per minute hydraulic pump is a must have for any log splitter application. Fits a wide range of applications, most commonly used on log splitters with a rated force less than 35 TON. This 2 stage gear pump allows for maximum speed without a loss of pressure.
What are the parts of a log splitter?
Key Hydraulic Log Splitter Components Include: Hydraulic fluid tank and hoses. Hydraulic pump. Hydraulic cylinder or ram. Hydraulic control valve. Wood splitter head or blade. Motor or power source. Splitting Wedge.
What is the RAM on a log splitter?
The ram stop is used to shorten the return distance of the log splitter.
Are electric wood splitters any good?
If you want to do you back a favor and replace your axe with a log splitter, there are many great options to choose from. While gas-powered versions are bigger and more powerful, electric splitters are quiet, less polluting – and usually quite sufficient for most home users.
What is a good size log splitter?
The thicker a log is, the more wood there is to force apart on either side of the grain. Logs that are larger in diameter need more pressure to split. That’s why a 4-ton log splitter will work well for 6″ branches, but a 24″ tree trunk will require at least the force of a 20-ton splitter.
How do you split wood without an AXE?
One of the simplest ways to split wood without using an ax is by cutting it partially through a table saw. You have to cut along the log’s length, rip it in several spots. Once you already hit with a maul or wedge, the wood is already partially split.
How do I know what size log splitter I need?
The size of a log splitter is determined by its tonnage. What is tonnage? Tonnage is the amount of force that the ram of a log splitter will exert as it splits a log. So to put it simply, the higher the tonnage the harder the ram will push on the log and the easier it will push through bigger logs.
How do you determine the tonnage of a wood splitter?
Calculate Hydraulic Cylinder Tonnage (Force) Calculate the cylinder tonnage by multiplying the cross sectional area as calculated above by the pressure capacity of the hydraulic pump. Example: using the cylinder calculation above and a 1,000 psi pump, multiply 19.625 by 1,000 to get 19,625 pounds of force.
How many pounds of pressure does it take to split a log?
Multiply the piston’s area by the splitter’s pressure rating. In the example, the splitter has a pressure rating of 3,000 pounds per square inch (PSI). Multiplying 19.625 by 3,000 gives you 58,875. The log splitter has a splitting force of 58,875 lbs..
How tall should a wood splitting block be?
The height of the block should be between 12 and 16 inches; if you go much shorter than that, the block is likely to split prematurely. In terms of diameter, your block should be several inches wider than the wood you’re splitting for both stability and safety. Stumps make handy surfaces and resist splitting.
How do you divide knotty pine?
With a splitter or maul/wedges split from the root end. Halve the round so that the split goes between the knots. Split the halves in wedges from the root end between knots or right through the center of the knot as they will split lengthwise if you get them down the center.
What’s better for splitting wood axe or maul?
For very large chunks of wood, the splitting maul is a great choice, as its heavier weight will give you additional power. For smaller pieces of wood, or splitting around the wood’s edges, a splitting axe is the better choice. It’s lighter, easier to swing and performs similarly to a splitting maul.
Can you split logs with a chainsaw?
For most people, an 18-inch chainsaw is an ideal length for splitting firewood. For indoor fireplaces, you want a 16-inch pice of firewood when all is said and done. However, if you’re starting with massive tree trunks, then you may want a 20 or 24-inch chainsaw to get through the thickness of that wood.
How small should you split firewood?
It is a good idea to split pieces less than 6 inches in diameter because this increases the exposed area of the wood. The greater the surface area, the faster wood dries and the better it burns. Pieces 3 inches and smaller should be used unsplit.
