Table of Contents
What is the fastest way to dig a post hole?
There’s no question about it — the fastest and easiest way to dig post holes is to use a gas-powered earth auger. Fill the tank with gas, position the auger on the ground, fire it up, hold on tight and watch the soil come streaming out of the hole.
How deep should a fence post hole be dug?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How do you dig a 4 foot post hole?
How to Dig a Hole: Pro Tips Step 1: String your line and pound the stakes. Step 2: Carve out a soil divot with a spade. Step 3: Loosen earth with a tile shovel. Step 4: Use your clamshell digger. Step 5: Use a reciprocating saw on large roots. Step 6: Dislodge rocks with a digging bar. Step 7: Tamp the soil with the other end.
What is the best tool for digging post holes?
The 6 Best Post Hole Diggers True Temper 2704200 Post Hole Digger. AMES 2701600 Post Hole Digger. Seymour Structron Hercules Post Hole Digger. XtremepowerUS Electric Post Hole Digger. Southland SEA438 One Man Earth Auger (Our Top Pick) Hiltex 10525 Electric Earth Auger.
Can I dig a post hole with a shovel?
With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down. Once you’ve sheared off the sides of the hole into the bottom, then you scoop out the loose fill.
How long does it take to dig a post hole with an auger?
Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.
How many bags of concrete do I need for a post hole?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How much quikrete do I need for fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Is a post hole digger worth it?
While that won’t make a lot of difference if you have loamy, soft soil to begin with, for those who have hard-packed clay soils it certainly does. If your soil is very solid, or has a lot of rocks, a post hole digger is an essential tool to have.
How deep can a one man auger dig?
Most augers dig about 3 ft. deep, but for deeper holes, ask for an extension rod (Photo 5), usually for no extra fee. Deeper holes are typically required for footings for decks or other structures attached to houses located in very cold climates where frost depths exceed 3 ft.
What size hole does a post hole digger make?
A 12-inch auger, best attached to a heavy machine, will create a hole large enough for a 6×6 or 4×6 post and plenty of concrete. Smaller augers, like 4- or 6-inch options, are appropriate for light-duty work (like mailboxes) as well as metal fence posts for chain-link fences.
Should fence posts be set in concrete?
Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
How long does it take to dig a 6 foot hole with a shovel?
It takes 0.61 hours (44 minutes) to dig 0.50 cubic yards of earth in light soil (sand, silt, loess, etc). Manual excavation standard output rate for excavating in medium soil for trenches 4 to 6 feet deep: 0.54 cy per hour.
Will an auger cut through roots?
The most effective method of installing a post through a root is to drill through it. There is a power tool available known as an auger that will drill through the root, and allow you to put the post right where you need it.
