Table of Contents
Electric fireplaces are designed to make life simple. They have no real fire, no smoke and no gas byproducts. In fact, all you have to do is plug yours into a wall outlet, just like you would any other appliance. Then, simply press a button to turn the fireplace on.
How do I turn my fireplace on?
Igniting with a Fireplace Key Look over the user manual included with your fireplace. Remove your fireplace’s outer cover. Put a fireplace key into the device’s gas valve knob. Hold a long lighter up to the burner and ignite it. Turn the gas key. Replace the fireplace’s outer cover immediately.
How do you turn on an electric fireplace without the remote?
Flames can be controlled using the flame effect switch, which you must turn on if installed differently from the main power switch. You can use the flame dial to control the flame’s brightness, and you can use it to control how bright or dim the flames appear.
Why is my electric fireplace not working?
Electric Fireplace Won’t Turn On Now, check for faulty wiring. Some electric fireplaces have a built-in fuse box (refer to owner’s manual). Replace any burnt out fuses if applicable. When the remote doesn’t work (and the batteries aren’t dead of course), the problem usually lies with the circuit board.
What does the pilot light look like?
A proper pilot flame should be blue with a yellow tip and should be strong enough to cover about 1/2 inch at the end of the thermocouple tip. If the flame is too strong and improperly adjusted, it will be blue but may be noisy and lift off the thermocouple, causing improper furnace operation.
How does an electric fireplace work?
Electric fireplaces work by drawing in cool air, heating it internally using a heating coil and gently forcing the warmed air back out into the room by way of a fan. Some electric fireplaces also use infrared technology which directly heats objects within a room.
What is a fireplace key?
Lighting a Fireplace With a Key The gas flow is controlled with a fireplace key — sometimes known as the hex key — as the fireplace is lit. To open the gas valve, turn the key. You may hear a slight hissing as the gas enters the burner, and the pilot light should light immediately.
How do you start a fire in a fireplace?
Start by placing two pieces of firewood on the grate in your fireplace. Now crumple newspaper, which is your tinder, and place it between the firewood. Place the kindling on top. Add one or two more pieces of firewood on top of the other logs, and be sure to leave enough room for air to circulate around the logs.
What do the buttons on my electric fireplace mean?
The power button supplies power to all of the functions of the fireplace. The power button will put the insert (I) in a standby mode. This will turn off all functions at once but will hold the settings in the memory. By pressing the power button again the unit will turn on at the same settings.
How do you turn on a Dimplex electric fireplace?
The manual controls for the Dimplex Electric Fireplace are located on the front panel. When not activated, the icons are not visible. Touch the control panel to the right side of the white line to activate the icons. The selected setting is displayed on the left side of the panel.
Can you use a universal remote on an electric fireplace?
Do You Have a Remote for My Electric Fireplace? In many cases, these remotes are much more specific to the fireplace they came with, and we do not carry universal remotes capable of replicating these features. Your best option will likely be to contact the manufacturer directly to locate a suitable replacement.
How do I reset my electric fireplace?
SOLUTION: Turn all switches to the “off” position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.
Why is my fireplace not working?
The thermocouple is a temperature sensor between the gas valve and the pilot light, and it will generate the electricity to ignite the gas when necessary. If the thermocouple is not screwed in properly, the fireplace won’t work. Check to make sure it is screwed in properly and placed correctly.
How do I start the pilot light on my fireplace?
Lighting a Gas Fireplace With a Control Panel Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights.
Should pilot light always be on fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.
How do I know if my pilot light is on?
If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color. Pilot lights should always be blue.
What happens when a pilot light goes out?
Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself, it could result in a very serious explosion.
