How To Read Blue Prints - Seniorcare2share

4 Tips for Reading Blueprints Begin with the title block. The title block is the first piece of information you’ll see in construction site plans. Study the plan legend. Find the blueprint’s scale and orientation. Look for notes from the architect.

Is it hard to read blueprints?

Blueprint reading is not terribly difficult but it does require practice and some basic knowledge of blueprints. This online blueprint reading course is designed to provide you with that foundation knowledge and enough practice at reading blueprints to get you started.

How do you read blueprints and floor plans?

Here are some general tips to remember when reading your new home blueprints: They are drawn to scale. Pages are typically in the order of when they’ll be constructed. The foundation plan shows specifications of the design you selected. Floor plans will show details and room dimensions for each floor being built.

What are the 3 basic views on a blueprint?

Orthographic: Each component has 6 sides and each can be shown as a view on a drawing. Typically, only 3 views (front, top, and right side) are provided unless other views are needed for clarification.

What are the parts of a blueprint?

The main sections of a blueprint are: Title Sheets and Site Plans. Floor Plans. Elevations and Sections. Details and Schedules. Structural Drawings. Mechanical, Electrical, and Plumbing (MEP) Drawings.

How do you read blueprints for beginners?

What do dimension lines end with?

The dimension line is a fine, dark, solid line with arrowheads on each end. It indicates direction and extent of a dimension. In machine sketches and drawings, in which fractions and decimals are used for dimensions, the dimension line is usually broken near the middle to provide open space for the dimension numerals.

What are the 6 types of construction drawings?

What Are the Six Types of Construction Drawings? Plans. Interior and exterior elevations. Building and wall sections. Interior and exterior details. Schedules and room finishes. Framing and utility plans.

What are blueprints called now?

Blueprints are still being used to this day. However, they are no longer blue and aren’t called blueprints. They are now referred to as drawings or plans. Most people still associate any type of drawing to blueprints.

Do floor plans show ceiling height?

Floor plans provide basic insights about the house, such as the areas of each room, ceiling height, window dimensions, and more.

Where is the wall height on a blueprint?

Once you have linear feet of your wall, you can usually find the heights on the reflected ceiling plan, interior elevation sheets, or on the building sectional views.

How do you read a roof blueprint?

Determine the square footage of one floor of your home. (For example, if you have a two-story home that’s 2,600 square feet, one floor would be 1,300 square feet.) Multiply this number by your most recent result to get the estimated square footage of your roof. (1,300 x 1.05 = 1,365 square feet.)Nov 25, 2020.

What is the top view of a blueprint called?

The plan view is a bird’s-eye view of a structure from above. It’s probably the most recognizable form of blueprint to most people: a two-dimensional or “flat” view drawn as if the walls were cut in half on the horizontal plane. Each floor of a building gets its own plan view drawing.

What are the different views of a blueprint?

In essence, there are three basic types of perspective drawings that are commonly used in architectural design and construction: one-point perspective, two-point perspective, and three-point perspective.

What is the most important part of print?

1. Resolution: Resolution of the printer is an important factor. If the resolution of file is not good then the prints will be blurry, muddy and incoherent. DPI, dots per inch is the most important measure when it comes to print output.

How do you read a CAD drawing?

Reading CAD drawings is a lot easier than you think. Look at the legend. The legend or key, usually located near the lower right-hand corner of the drawing, should explain all of the symbols on the drawing. Look at the title block. Read the notes. Pay attention to lines.

What are the lines on a blueprint called?

Dimension lines (see Figure 1-7) are short, solid lines that indicate the distance between two points on a drawing. They terminate or end in arrowheads at each end, and are broken to insert the dimension.

What does a dotted line mean on a floor plan?

A dotted line indicates architectural details within interior space, such as a tray or coffered ceiling; they may be called out in writing on the plan, too. A narrow rectangle composed with dotted lines typically indicates a beam in the ceiling. The dotted lines that wrap the porch exterior indicate beams or molding.

Do blueprints include plumbing?

The plan must contain information on what is happening in the entire room. This includes, flooring, electrical, plumbing and HVAC.

What is a phantom line?

Lines that are made visible as dots or dashes to reveal the edges of objects currently hidden from view.

What is cutting plane line?

Cutting plane lines are thick lines that run through the center of the object that the interior wants to provide an interior view of. Two perpendicular lines with arrows showing in which direction the interior of the object should be viewed are drawn at the end of the line.

Which line type does not ever have arrowheads?

Dimensions generally take the form of: linear dimensions, angular dimensions, and notes. Which line type does not ever have arrowheads? Extension.