Table of Contents
How to Build a Freestanding or Detached Deck Step 1: Layout & Prepare the Deck Site. Step 2: Dig Concrete Footing Holes. Step 3: Pour the Concrete Footings. Step 4: Install the Posts. Step 5: Build the Beam. Step 6: Set the Beam. Step 7: Install the Floor Joists. Step 8: Lay the Deck Boards.
Does a freestanding deck need footings?
According to the main code provision for footings, the only requirement for building a deck that is freestanding is that it must have a minimum footing depth of 12 inches below the undisturbed ground surface. There is no need to extend a footing below the frost line, as is required for standard decks.
Can you have a freestanding deck?
A freestanding deck is a beautiful addition to your home’s backyard landscape. This type of deck structure is self-supported and not directly attached to your home. It’s often the most practical choice for homes with brick or stucco exterior walls, which can make installing ledger boards difficult.
Can I build a deck directly on the ground?
Yes, you can build a deck directly on the ground, but with some conditions. A deck on the ground must be built with ground-contact wood, and the substructure needs to be adapted for minimal height. The wrong joist and beam material in contact with the ground will quickly rot, making your deck, garbage.
How do you support a deck without posts?
Instead of using footings, adding a level of gravel will give you the drainage aspect you are looking for. You can then add a frame of wood that anchors in concrete blocks that sit in the gravel, creating your new deck. Concrete blocks won’t rot, making them an ideal option for those who don’t want to use wood.
What is a free floating deck?
A floating deck is a deck that isn’t attached to a building and they “float” above the ground. They are sometimes called “grade-level” or “freestanding” decks because they’re built just above the ground level, or grade.
Is a freestanding deck better?
A freestanding deck is better than an attached deck in that water remains away from the house. With no ledger attached to the house, water will not become trapped against the house, possibly rotting the side of the house and deck. A freestanding deck gapped away from the house; water will freely flow off the deck.
How low can a deck be to the ground?
There is no standard height for a “grade-level” deck—the maximum measurement from grade to the deck surface could be 6 inches, 12 inches, 24 inches, or more. But generally speaking, I apply the term to decks that are up to 30 inches above grade, since guardrails are required for any decks that are higher than that.
What is the cheapest deck to build?
Pressure-treated wood, or chemical-treated wood, decks are generally the cheapest material to build decks with. For up-front savings, that seems great, but don’t forget long-term costs.
Can pressure treated wood touch the ground?
Ground-contact pressure-treated lumber can be used either above ground or in contact with the ground. Has twice the level of chemical retention and protection compared to above-ground treated wood. Must be used when lumber is less than 6 inches from the ground or has poor ventilation.
Do I need footings for a ground level deck?
If you want to expand your outdoor living space, a ground level deck might be your best option. Since it’s not connected to a house, it can go anywhere in your yard and doesn’t require deep footings. Because it rises just inches above ground, it doesn’t need stairs or railings.
Can I use deck pier blocks instead of footings?
Pier blocks can be used instead of footings for a ground-level deck not requiring permits. Any decks higher than 24” require concrete piles 10” in diameter and 48” below grade. These footing size requirements are to ensure enough soil bearing to prevent the joist from sinking in the ground.
How do you build a deck without digging holes?
If you’re ready to start planning, there are two great options to build a deck without digging any holes: surface deck blocks and deck foot anchors. The cheapest foundations are deck blocks, which can be purchased for less than $12.00 a piece. Deck blocks sit on the ground, so proper planning is essential.
What are deck footings?
Footings are a very important component of deck construction because they provide the solid foundation that will support your deck. Your deck’s design will determine how live and dead loads are transferred from different sections of the deck to concentrated points of contact with the ground.
How do you stop a deck from bouncing?
To stiffen the deck, go underneath and install a row of 2×8 blocks down the center, perpendicular to the joists. Stagger them with enough room to nail or screw them in place through the end grain, then fasten the treated 2x4s to the underside of the joists so they run from corner to corner, forming an X.
Will deck blocks sink?
The deck blocks can sink if the soil under them erodes for some reason or the weight is unevenly distributed. That’s why it’s a good idea to use more than less. Especially in loose soils or wet conditions which requires more weight distribution.
Can I set deck posts without concrete?
OZCO Building Products’ OZ-Deck Foundation System is one of the best ways to build a deck without digging holes. It’s a hot-dipped galvanized plate that when combined with OZCO’s post anchors creates a solid foundation so you can build a solid deck without digging holes or pouring concrete.
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.
