Table of Contents
Can you put drywall directly on basement ceiling joists?
Yes you can, but it is not always easy to do. The joists may not be perfectly spaced and you only have a 1-1/2 inch target for attaching two edges of the drywall. It also allows for a perfect layout 16 or 24 inches on centre. Feb 19, 2002.
What is the cheapest way to cover a basement ceiling?
Use Glue-on Ceiling Tiles A super easy DIY option for your basement ceiling is glue-on tiles. Typically made of polystyrene or fiberboard, these tiles come in a variety of colors, sizes, and styles, and are also paintable. You’ll need to install a foundation, like plywood, to glue them to.
What is the cheapest way to finish a basement ceiling?
Thin wood paneling — typically 1/8- to 1/4-inch thick — can cover an exposed ceiling, and it’s available in a variety of designs. Fir plywood, hardboard, even oriented-strand-board (OSB) are even more affordable, but these less-expensive options typically require paint or sealant.
Should I nail or screw furring strips?
For furring strip installation, affix the strips across the joists every 24” on center with screws or nails at least 1” long so that they will go into the joist with a minimum depth of 1/4″. Use shims, if necessary, to achieve a uniform flat and level ceiling or wall.
Do I need strapping for basement ceiling?
The first step in preparing the ceiling is to ensure there are no major issues with the sub-structure of the joists above, no plumbing or electrical issues to be addressed, and that, in general, you can live with a sealed ceiling. After that’s complete, the ceiling should be strapped to ease installation.
What goes up first ceiling or walls?
Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level.
What is the cheapest way to cover a ceiling?
Here are some affordable ways to beautify your home’s ceilings: Paint. It’s a great way to change the perception of your space. Tin Tiles. Hide damage and uneven surfaces with tin ceiling tiles that introduce a vintage vibe. Moldings and More. Tiles or Planks.
How much does it cost to put a ceiling in the basement?
Ceilings range from $1 to $6 per square foot, depending on complexity. At the low end, are ceilings that simply must be covered with wallboard and finished. But all too often there is framing work that also needs to be done in order to box in heat ducts or to lower the ceiling for running mechanicals.
How many 2×4 Do I need to frame a basement?
Lumber Sizes for Framing a Basement Most likely you want 8 foot 2x4s, but measure your basement before you go. Measure from the floor to the underside of the ceiling joist. Keep in mind you’ll be putting your studs in between a top and bottom plate so that reduces the length by 3 inches.
How much should I charge to frame a basement?
Framing and Insulation It costs $1,795 on average to frame a basement, not including insulation and drywall. Framing costs approximately $7 to $16 per linear foot on its own, but $20 to $30 per linear foot with drywall.
Can I finish my basement myself?
The basic steps to finish your basement include insulating walls, choosing flooring and adding a ceiling to transform your lower level into an additional living area.
What is the easiest ceiling to install?
Surface-mount ceiling tiles are easy to install. The grid for this system is much easier that the drop-ceiling grid, and the tiles attach directly to the grid. This is another project that can be done by one person, and in most cases, the tiles that go into place can be easily cut to size using scissors.
How can I hide the wires in my basement ceiling?
Cover a long bundle of electrical wires on the ceiling by encasing them in a hollow beam. Slip these U-shaped beams over the bundles, and nail them directly into the ceiling. Paint the beam for a more finished appearance.
How do you finish an unfinished basement ceiling?
If you don’t have obstructions hanging below your joists, you easily can finish your basement ceiling using drywall or paneling, such as 4-by-8-foot sheets of decorative grooved wall paneling. Sheet paneling is easy to install, but you’ll have to figure out what to do with the seams at the ends of the panels.
Is it cheaper to drywall or drop ceiling?
Drop ceilings are more expensive to install than drywall making drywall the cheaper option. However, if you can install a drop ceiling by yourself, you can save on labor costs. You should also factor in paint costs for a drywall ceiling and whether you are hiring a professional to install and paint for you.
How many furring strips do I need for a ceiling?
Install as many furring strips as necessary to cover the chalk line. For example, if your chalk line is 12 feet long, you will install one whole eight-foot furring strip, butting it against one wall, and then measure and cut four feet from another strip and attach it over the remaining space.
How thick should furring strips be?
Standard furring strips are marketed as 1-in thick, with the exception of the 2-in x 2-in strip. The actual thickness is usually just under a full inch. This makes them extremely versatile for a multitude of construction projects.
Can you use drywall screws for furring strips?
Once the furring strips are in place, you can install the drywall the same way you would on any stud wall. For a standard 8-foot high wall, start by installing a sheet of drywall horizontally at the top edge of the wall, using drywall screws inserted every 8 inches into the furring strips.
