Table of Contents
Spring washers should be used on the nut side of the fastener. If an additional washer is required to spread the load (as in our image above) it should be used between the spring washer and the mounting surface, i.e. the spring washer should be positioned next to the nut.
Where do spring washers and flat washers go?
Unlike flat washers, which are placed on both the bolt and nut side, spring washers only go on the nut side of the fastener to establish a bond. A spring washer offers axial flexibility that’s intended to prevent loosening of the fastener with which it’s paired.
What goes first washer or spring washer?
Method 1 of 3: When used correctly, a lock washer will hold the nut or other threaded fastener in place. To help it accomplish this, put the lock washer on first, below the fastener. If your project calls for other washers or hardware elements, they should go on before the lock washer so that it can hold them in place.
Does a spring washer go on the nut side?
If there is only one washer used with a nut/bolt, it usually goes on the nut side. The nut in most circumstances is more movable, and is more commonly turned to tighten the assembly. The washer helps prevent damage to the surface of the object being fastened.
What is spring washer used for?
Spring washers, which have axial flexibility and are used to prevent fastening or loosening due to vibrations. Locking washers, which prevent fastening or loosening by preventing unscrewing rotation of the fastening device; locking washers are usually also spring washers.
Should you use a flat washer with spring washer?
The order should be bolt head, flat washer, materials being clamped, flat washer, spring washer, nut. If you only have one flat washer per bolt, and if the material next to the bolt head is sufficiently hard to resist deformation, then the one flat washer should be on the nut side.
Which side of a washer goes down?
The general rule of thumb is that the flat side goes to the material, while the rounded side goes against the bolt or nut.
Which side does washer and dryer go on?
Placement of the washer on the left ensures the door won’t be in the way when transferring clothes to the dryer. Washer hinges are never on the right, though some models may allow you to swap the orientation. Laundry machines have traditionally been designed so the washer is on the left and the dryer is on the right.
Do washers go on both sides?
Washers can go both sides, but the primary function of a washer would be to stop vibration from loosening the nut, so there’s your first choice (with a slightly springy ‘split’ washer being a top choice) but also some nuts have locking technology….
What is the difference between a flat washer and a spring washer?
Plain and spring washers are both used to distribute the load of a fastener. The difference lies in their shape. Plain washers are flat, whereas spring washers are curved. Spring washers are unique because they provide an axial load that counters vibrations and, thus, prevents fasteners from loosening.
How do I choose a disk spring?
For static, or dynamic applications, select a disc spring that at 75% of its total available deflection offers the maximum force and/or deflection required. Between 75% deflected and the ‘flattened’ position, the actual force/stress characteristics become considerably greater than those calculated.
What is a spring lock washer?
Spring steel spring lock washers compress as the fastener is tightened and securely lock bolt or screw heads into place to prevent counterclockwise rotation from vibration. Spring steel construction offers resiliency.
Why do nuts loosen?
By far the most frequent cause of loosening is side sliding of the nut or bolt head relative to the joint, resulting in relative motion occurring in the threads. The off torque rotates the screw loose, if the friction under the nut or bolt head bearing surface is overcome, by this torque.
What are flat washers used for?
Flat washers Also known as plain washers, their purpose is to distribute the fastener’s load while reducing heat and friction during the tightening process. They can also be used as spacers, as is common in industrial and domestic applications. Flat washers are also called on to provide electrical insulation.
When should I split my washer?
Split washers can prevent bolts from loosening due to vibrations. As a machine or piece of equipment vibrates, the split washer will push back into it. Split washers are ideal for applications involving vibrations because they prevent the bolts with which they are used from loosening.
Do flat washers have a direction?
Yes, they are directional, based on the stamping.
Can I switch the position of my washer and dryer?
Pull your dryer away from the wall. (The dryer is lighter, so it’s easier to move than the washer.) Then shimmy that washer over to where the dryer used to sit. There’s no need to disconnect the washer hoses from the wall.
Which is the right side of a dryer?
1-10 of 13 Answers. It is in the middle, at floor level. Part of the installation is to raise the top of the dryer, which pivots the control panel to the rear. That gives you the right distance for the dryer fro the wall.
