Table of Contents
Drill bits that can drill through concrete are called masonry bits. They are also good for drilling through brick and stone. Drill bits with a tungsten carbide tip are the strongest; when it comes to solid concrete, the sharper the better. Masonry bits cut holes through concrete in two steps.
Can you use a regular drill to drill into concrete?
It is possible to drill into concrete with an ordinary rotary drill. Rotary drills take longer to drill into concrete than hammer drills and more physical effort is required. Excessive heat build-up can break the drill bit. One way to speed up the process and to avoid breaking the drill bit is to keep the bit cool.
Do I really need a hammer drill for concrete?
You can drill holes in concrete with a regular drill. They believe that you need a special hammer drill with hardened drill bits. While these tools do make the job faster they are not necessary.
Will a cordless drill go through concrete?
In most cases, yes. While a cordless drill will not be as effective in drilling through concrete, it can get the job done. Your drill’s battery power and other drilling features will play a role in its ability to drill into the concrete effectively.
What is a masonry drill bit look like?
Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them thanks to their wide arrow-shaped heads. They’re commonly used in hammer drills to grind masonry down as they cut through it. You can use them on brickwork, stone, breeze blocks, and other hard stone surfaces.
What Colour is a masonry drill bit?
Masonry bits have a toughened tip which is quite different to normal twist drills. There is no special colour. Most masonry bits we use are plain grey or silver. Take a look at the screwfix website and search for masonry bits then twist drill (also called high speed steel bits).
How can you tell if a drill bit is for masonry?
Choosing Drill Bits by Type Wood Drill Bits: These can be identified by a small, pointed tip at the very end. If you look closely, you can see spurs on each side. Masonry Drill Bits: These bits have a gently sloping tip. Metal Drill Bits: These have a wide-angled point at the end, and they may also be painted black.
Can you screw straight into concrete?
Can you screw directly into concrete? Concrete screws are a quick and convenient way to fasten to concrete. The best thing about these screws is that you can screw directly into concrete without any need for hammering or an anchor or shield to install. All you have to do is drill a hole and drive in the screw.
How long does it take to drill a hole in concrete?
A good quality hammer drill will finish a 2-inch deep, 1/4 inch wide hole in concrete block in less than a minute. A standard drill will take much longer and may not work at all in brick or poured concrete.
Will a metal drill bit work on concrete?
There are also different materials used to make the types of drill bits used for concrete, brick or tile. Almost all drill bits are made of metal. With few exceptions, metal bits are the most practical choice for every surface including wood, concrete, tile, glass and metal surfaces, as well.
Can I use an impact drill for concrete?
Can I Drill With an Impact Driver? If you’re drilling holes at 1/4-inch or under, you’ll be able to drill through brick and some concrete with an impact driver. Impact drivers have a freakish amount of torque, but they are not designed to be used like a regular drill or hammer drills.
How long should a masonry bit last?
Chinese masonry bits normally last for only a couple or three projects, before they get dull. But if that’s all you’re planning to drill, they will be fine. They are very cheap to replace if you ever need more. So it depends on how much drilling you plan to do.
Can a 12V hammer drill go through concrete?
Drilling into concrete can be accomplished with a 12 volt drill. Drilling a hole into concrete is best accomplished with a drill that you plug into a wall outlet. Drilling into concrete with a 12 volt drill is similar to using a corded drill for the task and requires the same basic drilling technique.
Can Ryobi drill through concrete?
Great tool! I have been using my Ryobi drill with a masonry bit to try and drill holes in a concrete basement wall, with limited success. This drill, with a regular masonry bit, drilled a hole for a plastic insert in concrete in about the time it would have taken me to drill a hole in wood with a regular drill and bit.
Can 12V cordless drill concrete?
Yes, you can. With proper technique and effort, you can use a cordless drill to drill concrete. Digging into the concrete using a 12V drill is very much like using a corded drill for the application and demands the same basic drilling technique.
How do you drill into brick without a hammer drill?
To drill into brick without a hammer drill, you can use the masonry or concrete drill bits as an alternative option. You can also utilize an impact driver if it’s within your reach.
Can I use a wood drill bit on brick?
You can never use wood or metal drilling bits to drill holes in masonry, you must use specific masonry drill bits designed for masonry. Masonry bits are excellent for drilling bricks, Thermalite or concrete blocks, mortar (cement), concrete and some tiles as well.
