Table of Contents
How do I know which way to install my furnace filter?
Slide the new filter in with the arrow pointing toward the furnace. Replacing your air filter is not difficult. Remember that air flows from your ducts, through the filter, and into the furnace. The arrow on the filter should always point toward the furnace.
What happens if you put your furnace filter in backwards?
When a furnace filter is placed backwards, the fibers can’t do their job properly. This means your furnace has to work harder to generate the same air flow, resulting in increased energy costs. Particles are also allowed to build up irregularly, making the furnace working even harder to draw air.
Does the arrow point up or down on an air filter?
Air filters have arrows printed on the sides of them that show you which way they are supposed to be installed. These arrows should be pointing in the direction that air flows through your system, which is away from the supply ducts and (typically) toward the blower.
Which side of furnace filter should be dirty?
In all cases, the furnace filter should be dirty on the side that the air comes into the furnace from. If your air filters are dirty in some other fashion, it is likely your furnace is not working properly, or the filter was installed incorrectly.
Why does my furnace have two filter slots?
So why does your AC have two filters? If you live in a large home, there’s a good chance your system requires more than one return air duct. And each duct requires a filter to stop particulates before they get to your blower motor. Or, you have a system that has multiple AC units.
Which way does air filter go in ceiling?
If your filter is on the ceiling, the arrow should face the ceiling. If your filter is on the wall, the arrow should face the wall.
Can you run your furnace without a filter?
Technically, you can temporarily run a furnace without a filter. The consequences of running a furnace without a filter include: Poor air quality: For one, not having a filter in place means there is nothing to prevent dust and debris from being sucked into your furnace and recirculated throughout your home.
What does it mean when a furnace is short cycling?
Furnace short cycling refers to the switching on and off of your furnace system without reaching the set temperature on the thermostat. And for those experiencing short cycling, you may notice suddenly that your home isn’t as warm as it should, leaving you and your loved ones cold and uncomfortable.
What is an air duct return?
A return duct is the part of the system that carries the air back to the furnace or air handler where it will then be circulated back out through the supply vents. Since the return duct is basically applying negative pressure to the system it is the one that houses the filter.
Why are my furnace filters never dirty?
A filter is designed to catch all the air that goes through your air conditioning. Because of this, it needs to fit snugly inside the holder to have a chance at catching the air. When that happens, the filter won’t get dirty because all that air isn’t going anywhere near it.
Why does my furnace filter get dirty so quickly?
Leaky Duct Work According to ENERGY STAR, a typical house loses 20-30% of air through leaks in the duct work and poor duct connections. Leaving these untreated can not only kill your furnace filter quickly, but also result in higher energy bills.
How often should you change your furnace filter?
In general, this is how often changing furnace filters needs to be done: For 1- to 2-inch filters, replace them every 1 to 3 months. For 3- to 4-inch filters, replace them every 6 to 9 months. For 5- to 6-inch filters, replace them every 9 to 12 months.
Should you put filters in your return vents?
Do not put filters in your supply vents. Your AC system should have a proper fitting filter on the return side. By placing a good fitting, high quality filter on the return vent, you will remove particles from the air before they can enter the AC system.
Can I stack furnace filters?
Can You Stack Air Filters? Do not stack multiple smaller air filters on top of one another to fit them into a larger air handler. Installing multiple 1” air filters in a 2” slot, for example, can cause costly damage to your AC unit, as residential furnaces are not equipped to handle this level of airflow restriction.
Do I need filters in my return vents?
If there is no air filter at your HVAC unit, then you absolutely need a return vent filter. So it will serve as the only line of defense against dust and particles entering your HVAC system.
Is no air filter better than a dirty one?
Running your air conditioner without a filter is worse than running it with a dirty one. Instead, get to the store as soon as possible for a replacement or call an HVAC professional for replacement. Without a filter, your air conditioner is at risk for severe and expensive problems.
Why is cold air blowing when the heat is on?
A clogged filter is one of the leading reasons for a heater blowing cold air. But even if you swap the air filter with a brand new one, dirt and debris can still be found within the unit. This could eventually lead to overheating. If your furnace looks pretty dirty, call an HVAC provider for a professional clean.
Can you vacuum a furnace filter?
Vacuuming your furnace filter will remove the build up of dirt and dust that impedes airflow through your system and increases your cooling systems run time. Vacuuming your furnace filter will not likely extend the life of your filter though.
