Table of Contents
Floor joists range from 2×8 to 2×12. It is less common to see joists that are 2×6, even though they are included in joist span tables. Older homes are more likely to use 2×6 for joist framing. There is no “typical” floor joist size because there are so many variables regarding the floor framing.
Are 2×6 OK for floor joists?
Yes, 2 X 6 lumber can be used for floor joists, but the allowable clear span is only about 4 or 5 feet. Such a small span is seldom useful.
What size floor joist do I need to span 12 feet?
What size floor joist to span 12 feet:- as per general rules and guideline, a 2×6 (2-by-6) size of floor joists made of southern yellow pine, graded as #1 can allows joist spans up to 12 feet for a live load of 30 pounds per square foot and dead load of 10 pounds per square foot when spaced 12 inches apart.
What thickness should floor joists be?
When choosing a joist spacing, check that your floorboards (or sheets) are strong enough to span over the width chosen. As a general rule – floorboards should be a minimum 16mm thick for joist centres up to 500mm and 19mm minimum for centres up to 600mm.
What size floor joist do I need for a 14 foot span?
Max. Live Load 60 lbs/ft2 (2873 N/m2) Maximum Span (ft – in) Nominal Size (inches) Joist Spacing Center to Center (inches) Lumber Grade 2 x 12 24 12′ – 4″ 2 x 14 12 19′ – 5″ 16 16′ – 10″.
Can I use 2×8 for floor joist?
The span for a 2×8 floor joist can range from 7′ 1” to 16′ 6”. In addition, floor and deck joists have to support a fairly high live load because they provide support underneath living areas. You may find that a 2×8 does not offer the necessary support on its own.
How far can a 2×6 floor joist span without support?
A 2×6 can support up to 50 pounds per square foot of weight without sagging with a maximum span of about 12 feet when spanning a distance horizontally, with the 2×6 standing in a vertical position. This number includes both live and dead weight.
How far can 2×12 floor joists span?
A 2×12 with an E of 800,000 psi and Fb of 790 psi also works, since it can span 15 feet and 10 inches. Given a design span of 15 feet 1 inch and a 16 inch joist spacing, first determine which size lumber will work.
Can a 2×10 span 16 feet?
The length of one 2×10 joist span depends on the wood species and how far apart it is from the next 2×10. A 2×10 southern yellow pine joist can span 16 feet and 1 inch without support. A doubled 2×10 beam can span 11′ without support for a deck that is 4′ wide.
How far can you span a 2×4 floor joist?
A 2×4 can span a maximum of 6′ 7” when spaced 16” apart and used as a floor or deck joist. When used as a ceiling joist or a roof rafter, a 2×4 can span up to 7′ 3” spaced at 16”, and 6′ 4” when spaced 24” apart.
Can I use 4×2 for floor joists?
4×2 timber floor joists on the ground floor have been used for decades but should be no more than 16 inch or 400 mm centres and be supported at no more than 2 metre centres , 6ft or 1.8 m is preferable and practical .
How big of a beam do I need to span 16 feet?
Wood beam size for a 16 foot span:- as per general thumb rule, for a 16 foot span, size of wood beam or lumber joist should be 2×10 which placed at 16″ apart from centre used for residential building or projects or construction in which depth of section of beam is 250mm (10″) and width of beam is 50 mm or 2″.
What is stronger 4×6 or 2 2×6?
In general, the bending strength of a beam is directly proportional to its width and directly proportional to the square of its height. In the bottom case the 4×6 is theoretically 2² = 4 times as strong as a single 2×6, but since there are two of them it is only twice as strong as two2x6s.
What size beam do I need to span 18 feet?
What size lvl beam for a 18 foot span:- as per general thumb rule, for a 18 foot span, size of LVL beam or GLULAM should be 9 to 10 inches deep and 3 inches wide, thus you need something like a 9-10″ GLULAM or LVL to span upto 18 feet and can use simple 2×12 dimensional lumber at 16″ apart from centre as floor joists.
Should deck joists be 2×6 or 2×8?
That’s a model deck code which includes joist span tables. If there is to be a railing, you need the joists to be at least 2x8s. 2x6s don’t have the depth needed to resist the leverage that can be placed on a railing post bolted to them.
How far can a 2×8 span without support?
Based on different manufacturers’ specifications, the maximum span a 2×8 LVL is from 12′ to 15′. Spans are also affected by the species of wood used in the manufacture of the laminated joists, with western woods edging out eastern woods in unsupported span distance.
How far can a 2×10 joist span?
Douglas fir 2-by-10 joists graded as “Structural Select” allows joist spans up to 21 feet for a live load of 30 pounds per square foot when spaced 12 inches apart, 19 feet 1 inch for 16 inch spacing and 16 feet 8 inches for 24 inch spacing.
