Table of Contents
Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”.
How do you determine the height of a toilet?
The traditional toilet bowl rim height is about 15-inches from the floor. The seat ring adds another ½ to 1-inch of height. Many people find a taller toilet bowl is more comfortable. American Standard offers Right Height toilets with a rim height of 16-1/2 inches from the floor.
What is the standard height of a toilet?
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.
What is difference between chair height and comfort height toilets?
While comfort height and chair height are two varying terms, they refer to a toilet of the same height. Comfort height is a brand-related term for chair height, whereas chair height is the common term for toilets with a minimum height of 17 inches.
How do I know if my toilet is 10 or 12?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
What heights do toilet bowls come in?
Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.
Can you get different height toilets?
So if you need an 18-inch seat height, you can get a toilet bowl with a height of 17-inch. And an 18-inch bowl for a 19-inch seat height. Some even went as high as 4 inches, use those to increase the seat height.
Who makes the tallest toilet?
The Highline® Tall is Kohler’s tallest toilet – a full 2″ taller than Comfort Height® toilets to provide ultimate accessibility and ease of use.
What height should a senior toilet be?
What is the Proper Toilet Seat Height for Seniors? The Americans with Disabilities Act (ADA) indicates that toilets must be between 17 and 19 inches from the floor, including the seat. It should be high enough so that sitting and standing are not excessively difficult. Both feet should rest flat on the floor.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
What does rough in size mean for toilets?
Toilet Rough-In Measurements and Standards Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.
Can a toilet be more than 12 inches from the wall?
It won’t affect how the toilet itself operates. However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
How do I know what size toilet to buy?
To measure the bowl shape, you can start by putting your measuring tape at the back of the toilet, and extend the tape forward to the end of the bowl, measuring parallel to the floor. The most important measurement you can take for a replacement toilet is the rough-in dimension.
Can you replace a 14 inch rough in toilet with a 12 inch rough in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
What is the tallest toilet height?
20 Inch Extra Tall Toilet Key Features & Specifications Description Specification Bowl Height / Seat Height 20 inches / 21 inches Flush Valve Dual-Flush Canister Valve Gallons Per Flush 1.28 GPF / 0.9 GPF Flush Lever Solid Metal, Enhanced For Light Activation.
How tall is a tall height toilet?
It is more comfortable for taller people and for people who have a hard time getting up from a low seat, like the elderly or disabled. It will measure 17 to 19 inches from the floor to the seat. Often this height toilet is priced less than the standard height toilet.
Are comfort height toilets more expensive?
For example, a comfort height, elongated bowl, two-piece Kohler toilet will cost approximately $168. On the other hand, a standard height, elongated, two-piece American Standard toilet will cost approximately $170. The cost of installation will be the same for a total cost of $348.
How tall is Kohler Highline?
Dimensions and Measurements Bowl Height 19 in. Height 33.25 in. Hinge Center to Center 5.5 in. Product Weight 111 lbs. Rough In 12 in.
How high is the Kohler Highline toilet?
The specs on this special toilet is 19 in high to the bowl rim.
