Table of Contents
Is it easy to move washer and dryer hookups?
The cost to relocate washer and dryer hookups can run up to $2,000 depending on complexity. Budget roughly $50 to $175 per unit for the simplest, most-straightforward projects. You can hire a local handyperson for the job, but you may need an electrician to install new outlets.2 days ago.
How much does it cost to move a washer and dryer connection?
Relocating Washer and Dryer Basic appliance installation costs $50 to $175 per machine. This service includes moving the washer and dryer as well as hooking up the water lines, drain lines, and dryer vent tube.
Can I move my washer and dryer to a different wall?
Moving the washer and dryer to the other side of the wall involves opening the pipes in the adjacent room to hook up the appliances. To do that, you will have to break the drywall, flip the connections, then repair the wall before installing your washer and dryer.
How do you relocate laundry?
Consider where you wish to move the washer and dryer. Draw a blueprint of where the plumbing will run. Shut off the power and water supplies to the washer and dryer. Place a bucket under the pipes to catch dripping water while you cut. Use pipe cutters or hacksaw to cut off the old plumbing pipes.
Can you install a washer and dryer anywhere?
Although you theoretically could place it anywhere in your home, it still must be in an area with the required utility hookups and ventilation capabilities. An electric unit needs a 240-volt electrical supply, while a gas unit needs the same gas hookups as full-size freestanding machines.
Can you extend washer and dryer hookups?
You’ll need a dedicated 220V circuit for the dryer, and then another circuit for the washer and plugs in the room. You can probably extend the existing dryer outlet by converting the existing receptacle into a junction (with blank faceplate) but of course it depends on what you are doing with that space after.
Can I move my washer and dryer to the garage?
Installing your washing machine in the garage is perfectly appropriate because of its concrete floors and is suited for appliances such as washers and dryers. It also optimizes space by making use of the available space in your garage.
How much does it cost to install plumbing for a washing machine?
How much does it cost to add washer and dryer hookups? On average, the price to add hookups runs between $350 and $600, but it could cost up to $2,000 if a lot of plumbing and electrical work is needed.
Is it OK to put washing machine in the garage?
Generally, there is no problem with installing your washing machine in the garage. In fact, the concrete floor is perfectly suited to an appliance that may leak a little water here and there. Once these requirements are satisfied, the garage works as good as any other room.
How hard is it to move washer and dryer?
Moving a washing machine or moving a washer and dryer combination requires preparation and planning. Washing machines need to be disconnected and drained properly before a move. Washing machines can also be quite heavy. Although it is possible to move a washing machine by yourself, it’s safer and easier to get help.
Can you relocate washing machine?
While it is possible to move a washing machine without the help of professional moving services, it would be impossible to do the job alone. So, find a couple of mates to help make sure that you can complete the job as safely as possible. Make sure to recruit those who can help lift something as heavy as your washer.
Where is the best place for a laundry room?
Basements are often used for laundry rooms since they offer more space than the ground floor or upper levels. Also, putting the laundry room in the basement lets you maximize space in the living areas upstairs. In the event of flooding, water is contained in the basement, away from living areas.
Can I use stackable washer and dryer anywhere?
Generally, you can put a stackable washer and dryer anywhere in your home or apartment. The only condition is that they must have access to three things: power supply, water supply, and venting hose. As a highly recommended extra, you’ll also want to get a stacking kit as well.
How much clearance is needed for a stackable washer and dryer?
Stacked washer and dryers and combination units required a vertical clearance of 60 to 76 inches and a horizontal clearance of 24 to 30 inches. Measure the depth and allow six inches for hoses, venting, and air circulation.
How far can I extend my washing machine drain hose?
The answer to this question is complicated by the fact that it is much harder to pump water vertically than horizontally. Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).
How far can a washer be from the drain?
For new Top Load washers, the drain hose should be no more than 5″ down into the drain pipe. For Front Load washers, the drain hose should be no more than 7″ down into the drain pipe.
How do I get my washer downstairs?
Moving the Washer and Dryer With a friend, shimmy the washer or dryer away from the wall, and tip the appliance backward. Place your foot behind the dolly’s wheel and tip the dolly back as your helper supports the weight. To move the appliance down stairs, it is best to go bottom first.
