QA

How To Install A Window Well

How deep does a window well need to be?

How Deep Does a Window Well Need to Be? A window well should be roughly 8 inches deeper than the window sill and approximately 6 inches wider than the window opening.

Do window wells need drains?

Window Well Drain – Every window well should have a drain to allow water to exit the window well and not build to a level that creates a basement seepage problem. Drains can be connected to interior or exterior drain tile or can be run to daylight where a proper slope exists.

How deep should the gravel be in a window well?

Drainage & Backfill Procedures Use pea gravel or ¾ inch or smaller free-draining rock, around the well stopping approximately 1 foot down from the top of the window well.

Should I put rocks in my window well?

There isn’t really a minimum level of rocks in your window well, but the levels should be appropriate given the depth of it (and going deep is always better). However, the window well should definitely not be overfilled. This increases the risk of flooding and windows breakage.

Should window wells be covered?

At Window Well Experts, we recommend that all window wells be fitted with a proper cover. When you look at the benefits of window wells, almost all of them require a sturdy, leak-proof cover in order to achieve their fullest benefit.

What do you put in the bottom of a window well?

The bottom of the well should contain loose gravel, which also helps with drainage. This should not be allowed to become too compacted or it will also cause water to collect in the well. You can either replace gravel periodically or remove it and clean it before putting it back in place.

What is a window well liner?

Decorative window well liners are a great alternative to looking out your basement window at a galvanized window well. Window well inserts are the easiest way to transform your basement windows from plain, boring metal to an attractive vista of your choosing!.

When should window wells be installed?

These are known as window wells, and they are important in almost any sort of basement finishing treatment. Windows allow for a way of “egress” or exiting the building if the stairs are inaccessible. They are also ideal for bringing in light and air when the basement is dark and even damp.

How do you keep water out of window wells?

The easiest way to keep your window well drain unclogged is by installing a quality window well cover. It will prevent excessive water, debris and even small animals from getting into your window well and causing problems.

How do you keep window wells from filling up with water?

Here’s what you can do to keep as much water away from your house as possible: Fix grading to make sure it slopes away from the foundation. Keep your gutters clear of debris and in good working condition. Extend downspouts away from the house to keep roof runoff from pouring next to the foundation.

How do you waterproof a window well?

How to Waterproof Your Basement Window Wells 1 – Ensure Proper Drainage. First and foremost, you need proper drainage features inside the window well. 2 – Foundation Grading. 3 – Replace Your Gravel. 4 – Use Window Well Covers. 5 – Perform Routine Window Well Maintenance. 6 – Apply Concrete Sealers.

Should I put pea gravel in my window wells?

Do not pour the pea gravel into the window well since it could break the basement window.

How high should rocks be in window well?

Manufacturers of the metal window well suggest digging deeper into the well and placing 12 inches of gravel at the bottom. This will allow the water to dissipate into the ground slowly. This simple project along with a cover for your metal window well will stop the water from seeping into your foundation.

Do window wells work?

to prevent moisture damage to basement windows that are at or below grade. The window wells keep the soil away from openings in the foundation walls while still allowing proper grading and drainage away from the house; and. to allow sunlight into a below-grade room that would otherwise require artificial lighting.

How much is a window well cover?

Expect to pay from $100 to $300 or more per metal window well cover. Whether they’re metal or plastic, most high-quality modern window well covers will last for decades.

Can you grow plants in a window well?

My favorite partial shade annuals are viola, coleus, begonias, polka-dot plant, perilla, and fuchsia! These little plants will thrive in your window wells. If you want to make those window wells look even better you should consider these egress window wells.

What are window well liners made of?

Window well covers are available in different materials: Plastic material, mainly polyethylene and polycarbonate (a thermoplastic) Metal material, mainly aluminium and steel. When a window well cover is made out of this material, it is commonly referred to as a window well grate.

Can window wells be replaced?

Window well replacement is likely to be slightly cheaper; to re-dig a window well and install a new window well cover may cost between $500 and $1,000. You may need a window well replacement if your window well has been damaged. The cost depends on the severity of the damage.