Table of Contents
Do not shower for at least 24 hours after shocking your well. Waiting for one or two days more, if possible, is much better. Chlorine levels in the well water will go down only after freshwater dilutes and replaces chlorinated water. This process can take 1-2 days.
How long should you wait to use water after you chlorinate a well?
Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER. CONTACT WITH THE WATER MAY CAUSE SKIN, EYE AND NOSE IRRITATION.
How long does it take for bleach to dissipate in a well?
It can take 30 minutes to 24 hours or more to flush all of the chlorine from the well. ►Once the chlorine is gone from the well, open up each fixture one at a time until the chlorine smell is no longer present. This will purge the remaining chlorine from the water system.
How long should you run the water after shocking well?
Run the water out of the hose for about 10 minutes in an area away from the well, septic system, landscaping, and bodies of water. The water may be discolored. Continue monitoring and running the water until it runs clear.
How long does it take to smell bleach when shocking a well?
3. Mix the bleach with the well water. Ⅰ Attach a hose to the nearest outside faucet and allow the water to run onto the ground for 1-2 minutes until you smell chlorine. Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.
Can you put too much bleach in a well?
According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.
Can you put too much chlorine in a well?
Avoid putting too much chlorine into the septic system, too much chlorine may kill the bacteria needed for septic decomposition. Reconnect any carbon filters (if the shock was due to unsatisfactory test results, replace with new carbon filters).
How often should I bleach my well?
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How much bleach do you put in a well?
4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.
How do you remove chlorine from well water?
Yes, boiling water for 15 minutes is one way to release all the chlorine from tap water. At room temperature, chlorine gas weighs less than air and will naturally evaporate off without boiling. Heating up water to a boil will speed up the chlorine removal process.
Why does my well water turn brown when I add bleach?
The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.
How do I get rid of algae in my well water?
Use bleach to kill the algae. If you have a problem with algae, you can use bleach to kill it all. The ratio should be one-quarter teaspoon for each gallon in your tank. Bleach is great for killing algae (and other organisms that may lurk in your tanks) and for keeping it from coming back.
Why is my water brown after shocking well?
Practically always after you shock-chlorinate your well the water turns brown. The chlorine used to shock the well reacts with iron, manganese and reducing bacteria in the well and it is pulled into the water chlorine solution. That is the brown you see. Rust or breakdown of the metals in in the well or house.
How long does bleach last in water?
When bleach and water are mixed together to create a cleaning or disinfecting solution, the solution is only good for 24 hours. The temperature of the water does not affect the cleaning or disinfecting abilities of the solution. After the 24 hours, the solution begins to lose needed disinfecting properties.
Why does my well water smell like rotten eggs?
Hydrogen sulfide gas (H2S) can give water a “rotten egg” taste or odor. This gas can occur in wells anywhere and be: Naturally occurring – a result of decay and chemical reactions with soil and rocks. Produced by certain “sulfur bacteria” in the groundwater, well, or plumbing system.
Can you drink water with bleach?
It is never safe to drink undiluted bleach! Bleach is a corrosive chemical that burns tissues. Drinking bleach damages the mouth, esophagus, and stomach, lowers blood pressure, and may lead to coma and death. Diluted bleach is used to purify drinking water.
Can I put Clorox bleach in my well?
You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test. To disinfect your well follow this procedure.
How do you shock a water well with bleach?
Overview. Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.
Should you pour bleach in a well?
Bleach should not be put into the well straight from the bottle. The general recommendation is to dilute the laundry bleach 1:100, (one gallon of bleach to 100 gallons or water; half a gallon of bleach to 50 gallons of water; a quart of bleach to 25 gallons of water.).
