Table of Contents
Definition of Phillips-head screwdriver : a screwdriver that is designed to be used with a type of screw (called a Phillips-head screw) that has a slot in its top that looks like a cross.
What is a Phillips head screwdriver used for?
Phillips Screwdriver Also known as cross-head screwdrivers, Phillips screwdrivers are one of the most common types. But what is a Phillips head screwdriver? These tools are designed to fit screws with Phillips heads, which have a cross-shaped recess – hence the alternative name of cross screwdriver.
What is a standard Phillips head screwdriver?
Screwdriver Technique While screw size is shrouded in mystery, there are four basic sizes of Phillips screwdriver — from #0 to #4 — #0 being the smallest. The most common sizes are #2 and #1, #2 for standard screw sizes, #1 for “miniature”. Then there are the jeweler-size screws.
Why is it called a Phillips head screwdriver?
Henry Frank Phillips (June 4, 1889 – April 13, 1958) was an American businessman from Portland, Oregon. The Phillips-head (“crosshead”) screw and screwdriver are named after him. Thompson who, in 1932, patented (#1,908,080) a recessed cruciform screw and in 1933, a screwdriver for it.
What are the 3 types of screwdriver?
What are the Screwdriver Types? Flat Head or Slotted Screwdriver. This screwdriver type is probably the most common form of hand tool. Phillips Screwdriver. Torx or Star Screwdriver. Hex Screwdriver. Pozidriv Screwdriver. Robertson or Square Screwdriver. Tri Wing Screwdriver.
What can I use if I don’t have a Phillips screwdriver?
Removing a Phillips head screw Flathead screwdriver. If the only screwdriver you own is flat-headed, you can use this to remove Phillips head screws. Coin. Butter knife. Hacksaw. Toothbrush. Old CD. Pliers. Thumbnail.
What is the largest Phillips head screwdriver?
Phillips head screwdrivers come in sizes from 0 to 4. The lower the number, the larger the tip. Most jobs can be handled by a No. 2, like this 7-inch option from Klein.
What is the most common crosshead screwdriver?
Terms in this set (12) Slotted screwdriver. The most common type of standard screwdriver; it fits slotted screws. Phillips Screwdriver. The most common type of crosshead screwdriver. Clutch-Drive screwdriver. Torx Screwdriver. Robertson Screwdriver. Allen (hex) wrench. Open-ended wrench. Box-end wrench.
When did Phillips head screws come into use?
In the early 1930s, the Phillips head screw was invented by Oregon businessman Henry Phillips (1889–1958). Automobile manufacturers now used car assembly lines. They needed screws that could take greater torque and could provide tighter fastenings.
What are the different types of screwdriver heads?
Types of Screwdriver. Flat Head (or Slotted Head) Screwdriver. Phillips Screwdriver. Pozidriv Screwdriver. Robertson or Square Screwdriver. Torx Screwdriver. Hex Screwdriver or Hexagon Screwdriver.
What are Phillips screws?
Noun. 1. Phillips screw – a screw with a special head having crossed slots. screw – a fastener with a tapered threaded shank and a slotted head. trademark – a formally registered symbol identifying the manufacturer or distributor of a product.
What is a square headed screwdriver called?
What is a Robertson Screw or Robertson Head Screw? Most of us call Robertson screws “square drive” or “socket head” screws. They were invented by Canadian traveling salesman Peter Robertson around 1906.
How many types of Phillips screwdrivers are there?
Phillips screwdrivers come in five main types or styles.
What tool is used to tighten screws on a laptop?
Torx screwdriver: Used to tighten or loosen screws that have a star-like depression on the top, a feature that is mainly found on laptops.
Are all screwdriver bits the same?
A screwdriver bit is a tool for driving screws and one that can be fitted to most drilling power tools. Each screwdriver bit has different types of shanks and tips to suit different screws and applications – all are described in depth below.
What is the difference between a Phillips and a pozidriv?
Phillips screw heads are designed so that the Phillips screwdriver will cam-out (slip) if too much torque (power) is applied. Pozidriv screws, on the other hand, are designed specifically so that the screwdriver head does not cam-out. Phillips screwdrivers fit in Pozidriv screws, and can turn them.
What screwdriver do I need to build a PC?
For the vast majority of PC builds and upgrades, a basic No. 2 Phillips screwdriver will be the only tool you’ll need.
What is the difference between a Phillips screw and a reed N Prince screw?
The Frearson screw drive, also known as a Reed & Prince (R&P) may look similar to a Phillips, but the shape is different in a beneficial way to the wood boat builder. The Frearson has a sharper tip and large V-shaped angle.
What are Triangle screwdrivers called?
Tri-point screwdrivers resemble Phillips tools but have three points instead of four. These screwdrivers are often used with electronic hardware. Triangle screwdrivers are used for screws that use a triangle-shaped recess at the head. The sides of the triangle bit are straight.
What type of screwdriver is used by an electrician?
The two most common electrician’s screwdriver models used are the Phillips head driver and the flat head, or blade-style, driver.
What is a Phillips screwdriver look like?
A Phillips screwdriver has a head with pointed edges in the shape of a cross, which fits neatly into the cross slots of a Phillips screw. Phillips screwdrivers are available in five different sizes, from zero to four. If you don’t use the right size, you can easily strip a Phillips screw, making it difficult to remove.
Why are there Phillips and flat head screws?
The reason for the different styles is cost and torque. Phillips screws are self-centering, making powered screwdrivers possible. They’re somewhat more expensive to produce than slotted-head. They tend to ‘cam-out’ easily under torque, making it hard to apply much torque.
