Table of Contents
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
Can you manually light a pilot light?
Use a grill lighter or long match to light the pilot light valve at the bottom of the oven. Some ovens are designed to be manually lit at each use. In this case, slowly turn the temperature knob while holding the flame to the pilot light valve. Close the oven door after the pilot light ignites.
Why won’t my pilot light light on my gas furnace?
There are several possible reasons why your gas furnace pilot won’t light: an ongoing draft, a faulty thermocouple, an accumulation of dirt, or an inefficient supply.
Should the pilot light always be on in a gas furnace?
Most furnaces with electronic ignition have a device called a hot surface igniter. The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
Why is my furnace not blowing hot air?
First, check to make sure the thermostat is set correctly. You will want to make sure that the fan control is set to auto, and not ‘on’. If the thermostat appears set correctly, turn off your heater at the thermostat and check the filter. If the filter is dirty, replace it.
How do I get my pilot light back on?
How Can I Restart My Pilot Light? Step 1: Turn off your furnace. Step 2: Locate your gas valve. Step 3: Hold down the red button. Step 4: Light the pilot light. Step 5: Let go of the button. Step 6: Turn your gas back on. Step 7: Turn your furnace back on.
How do you start a furnace without a pilot?
If your furnace is equipped with an electronic igniter, you cannot light the furnace manually. However, you may be able to get the furnace working by turning off the igniter and resetting it. Find the paperwork for your particular furnace to locate the reset button or switch.
What causes a pilot light to go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Can you light a furnace with a lighter?
Use a long lighter to light the furnace pilot light. Once it’s got a flame, which can take about 30 seconds, you can release the reset button. Once the furnace pilot light has a steady flame, you can turn the switch on and adjust the thermostat to the desired temperature.
What do I do if my pilot light won’t light?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Why does my furnace not ignite sometimes?
The Pilot Light (Faulty Ignition Sensor) The pilot light or ignition sensor is usually the most common issue when your furnace will not ignite. This is typically the problem if you can hear your furnace click on but it does not fire up. If the sensor or ignitor is dirty, it will need to be cleaned.
Why is my furnace not running?
Ensure your furnace filters are clean: Your furnace won’t start up if it does not get enough airflow. Check your pilot light: If you have a gas furnace and gas supply is stopped your pilot light will go out. Check your blower motor: If the blower motor is not working then your furnace won’t pump out warm air.
Will gas leak if pilot light is off?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
Does Central heat have a pilot light?
There is no pilot light to go out on a central gas heater — and no chance of gas escaping into the room — which also means you cannot ignite the burner manually. From time-to-time, the gas heater may require restarting to engage the igniter and burners.
What do I do if my furnace is blowing cold air?
How To Troubleshoot Furnace Blowing Cold Air Step 1: Check Thermostat Setting. First and most importantly, make sure your thermostat is set to Heating Mode. Step 2: Evaluate and Adjust Your Vents: Step 3: Assess Furnace Filters and Replace Filters If They Are Dirty. Step 4: Call An HVAC Pro.
Where is the reset button on a furnace?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
How much does it cost to relight a pilot?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
