Table of Contents
How do you read room dimensions?
For example, a dimension of a rectangular room on a blueprint, 14′ 11″ X 13′ 10″ equates to a room size of 14 feet, 11-inches wide by 13 feet, 10-inches long. Dimensions are expressed as width by length by height or depth in three-dimensional space.
How do you read ceiling height on floor plan?
A floor plan can’t tell you the height of the windows or doors. A floor plan can’t tell you how high the ceiling is unless it’s specifically noted down on the floor plan. A floor plan doesn’t contain any information about what finishes are used on the interior or exterior of the home.
What do dashed lines on a floor plan mean?
Short-Dashed Lines Viewed in a Floor Plan Lines made of short dashes in a plan view indicate things that are overhead, or rather, over the height at which the plan was “cut” — usually things above about 4′ from the floor.
What comes first width or height?
What comes first? The Graphics’ industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width.
What are the various symbols in a floor plan?
Most plans include symbols that are a combination of: Appearance (for instance, a bathtub looks like a bathtub) Conventions (double lines are commonly used to denote walls) Labels (for instance, a thermostat is labeled “T”).
Is it hard to read blueprints?
Blueprint reading is not terribly difficult but it does require practice and some basic knowledge of blueprints. This online blueprint reading course is designed to provide you with that foundation knowledge and enough practice at reading blueprints to get you started.
Do floor plans show ceiling height?
The floor plan shows what changes will be made to the structure after the demolition phase and where new walls are to be constructed. Once you have linear feet of your wall, you can usually find the heights on the reflected ceiling plan, interior elevation sheets, or on the building sectional views.
How do you read an architect drawing?
Start in upper left corner and work way across page so as not to miss any details. Read the plan cover sheet. This contains important project information like the project name, architect, contact information, project information and the date. It might also include a drawing of the finished product.
What are dotted lines called?
The red line is called a “dotted line” (. . . . .) and unshown is a “dashed line” (- – – – -) because one uses dots and the other uses dashes. Blue line would have an unfamiliar name to a layman, technically called a dash-dotted line (. – . – .
What do dotted lines represent?
Something Vague or Insubstantial. The dashed line gives us the visual vocabulary to express something vague or abstract. This idea is even translated into corporate-speak. When someone is a “dotted line report,” it indicates the person is not a direct report, though there is some connection and accountability.
What does 12×16 mean?
Room dimensions are presented in width by the length. For example, a room that has a dimension of 12′ x 16′ means it’s 12 feet wide (from side to side) by 16 feet long (from top to bottom).
When given 3 dimensions what is the order?
When you tell us the dimensions of the box, they need to be in this order, Length x Width x Depth.
What order do dimensions go in?
Length, width, height, depth.
What are the three steps in the process of reading a blueprint?
With 2D blueprints, there are three common perspectives: plan, elevation, and section. Understanding which one of these is being employed is an important first step to reading any drawing. Plan: A bird’s eye view of planned work. Usually this is done on a horizontal plane at 30″ above the floor.
Whats the difference between a site plan and a floor plan?
A site plan shows all the structures on a plot of land, while a floor plan is for the interior mapping of the building that sits on the site. A floor plan is a scaled drawing of the interior of a home depicting details such as the room sizes, doors, windows, fixtures, and relationships between those spaces.
What are blueprints called now?
Blueprints are still being used to this day. However, they are no longer blue and aren’t called blueprints. They are now referred to as drawings or plans. Most people still associate any type of drawing to blueprints.
How do you read a drawing?
Title block Name and address of the company or agency who prepared or owns the drawing. Part number and description. Material. Mass. Finish. General tolerances. Projection details. Scale used in the drawing.
What is a plan view of a drawing?
The term “plan” may casually be used to refer to a single view, sheet, or drawing in a set of plans. More specifically a plan view is an orthographic projection looking down on the object, such as in a floor plan.
How do you read window dimensions on blueprints?
Windows – Window dimensions are in metres and expressed as four digit numbers – the first two digits refer to the height of the window, the second to the width. Take the window in the living area of our plan. It is listed as 21:24, which means it is 2.1 metres high by 2.4 metres wide.
