Table of Contents
How to Remove a Coaxial Cable Lock Insert the tissue paper inside the gap between the coaxial cable and the cable lock. Insert the clip of the pen cap inside the tissue paper. Press firmly against the pen cap, and turn the cable lock counterclockwise to remove.
How do you remove coaxial cable lock without tool?
Can I loosen the nut of the coax cable without using a wrench? You need to prepare large coins (it is best to use 2 pence coins). Then, place them on either side of the nut. Then grip them between the knuckles of the middle and index fingers and rotate them counterclockwise to loosen a coaxial cable nut.
How do I remove a coaxial cable compression connector?
How to Remove Connectors From Coaxial Cable Locate the connector nut on the cable that you want to remove from the coaxial cable. Disconnect the coaxial cable from any equipment that it is attached to. Pull the coaxial cable straight out of the equipment. Hold the cable straight out in front of you.
How do I remove a Comcast coax cable?
Unscrew, from the back of your cable box, the coaxial cable that comes from the wall outlet. Twist the connection counterclockwise until you can pull away the cable completely.
Can you use pliers instead of a wrench?
Although pliers can be used to tighten and loosen nuts, this is a task better suited to the wrench. Pliers tend to damage the surfaces of fasteners and are usually more difficult to use than a properly-sized wrench.
What can I use instead of a pipe wrench?
While the pipe wrench is still used for steel and iron pipe, it has mostly been replaced by tongue-and-groove pliers, also known as channel-type, slip-joint, or Channellock pliers (a brand name that has become a generic term).
Can I shorten a coaxial cable?
Luckily, shortening your TV cable, or coaxial cable, is a relatively simple process that you can do on your own at home. So before you call the cable repair person or put some random plant or piece of furniture in front of that coiled TV cable, grab a couple of tools and shorten it yourself.
Does Comcast install coax cable?
What does Comcast professional installation include? Comcast Xfinity professional installation includes connecting a coaxial cable to your cable box or modem, but it may also include another step or two to prepare your home for Xfinity service.
What happens if you don’t have a coax outlet Comcast?
not having coax outlets does not mean you cant have cable internet, it just means Comcast has to do more then just run their lines up to your house and plug into a box outside and viola whole home internet. If you have every had cable tv or satellite tv installed the process is similar.
What is a coax connector?
Coaxial cable connectors are used to connect cables to other devices and are specifically designed to maintain the shielding on the cable. Male connectors have a protruding metal pin in the center, whereas female connectors have a receptacle to receive that pin.
Should I remove coaxial cable?
A: Cable and phone wires don’t carry current, so it’s safe to remove them. However, it’s critical not to cut into a power line, as you know.
How do you unscrew a Videotron cable?
You can unscrew the cable by hand (counter-clockwise). Use the security socket remover if you can’t unscrew the cable by hand.
What size wrench is coaxial cable?
The 7/16″ wrench should be in every home enthusiast’s toolkit. It’s the perfect size for coax cable connections.
Why are coaxial cables so stiff?
The nature of Coaxial cables is that they are all stiff. The intention is to maintain the spacing between the core and the screen so the permeability stays the the same. This means the geometry of a cable should stay the same along it’s entire length. Those that flex or have been bent are now no longer perfect.
Why are monkey wrenches called monkey wrenches?
Charles Moncky, a Baltimore mechanic, invented the monkey wrench around 1858. Moncky’s wrench was named using a purposeful misspelling of his name. Stillson, a steamboat firefighter, received a patented on September 13, 1870 for an invention later known as the Stillson pipe wrench.
What goes on the end of a ratchet?
A ratchet is a handle that snaps into one end of a socket by means of a square-drive connector. A switch on the ratchet reverses the action to loosen the fastener.
Does a monkey wrench have teeth?
Monkey wrenches have smooth jaws or jaws with no teeth. This means that monkey jaws have a smooth jaw that is ideal for turning or twisting flat surfaces.
What does a monkey wrench look like?
A monkey wrench has been described as having both an L- and F-shaped appearance. Basically, the monkey wrench has a fixed upper jaw with a lower jaw that can move up and down the wrench through a screw mechanism. Conversely, if you want to loosen a fastener, turn the monkey wrench counterclockwise.
How do you disconnect cable connectors?
To separate the connector, gently push the tip of a spudger under the clip. Then, swing the clip over to the other side of the socket, so that it lays flat against the cable. Holding the clip and cable together, gently pull in the direction of the cable to remove the connector from its socket.
What does an F type connector look like?
The F connector is an inexpensive, gendered, threaded, compression connector for radio frequency signals. The male connector has a center pin, and a captive nut with internal threads. The design allows for low-cost construction, where cables are terminated almost exclusively with male connectors.
