Table of Contents
How much will a concrete grinder remove? A grinder can take off up to 1/8 of an inch of material with each pass — less than a concrete scarifier, which cuts into surface coatings and the underlying concrete and can cut about 1/4 of an inch with each pass.
What is the best way to grind down concrete?
For a small job, rent an angle grinder equipped with a diamond grinding wheel ($50 a day or less). It’s the perfect tool for taking down just a few high spots or tough-to-reach areas near walls. Be sure the one you rent comes with a means of attaching a vacuum to suck up the dust.
Can you grind an inch of concrete?
A small planetary concrete grinder with basic grinding tools will remove around 1/16” of the concrete in 1-2 passes in a normal situation. You might be able to remove more – 1/8” if use a heavier concrete grinder and more aggressive PCD tools. In fact, an angle grinder with a cup wheel will do the best job.
How fast does a concrete grinder work?
Most users report that grinding down to an original floor for harder concrete could take up to 6 hours for 500 ft. This would include larger jobs covering the same surface area but having more to remove, like certain glue types or other imperfections stuck in the cement.
How much does it cost to grind a concrete floor?
Cost to Grind Concrete Floor The cost to grind a concrete floor is $1 to $4 per square foot. Grinding or sanding concrete removes adhesives and curing agents, opens up the pores, removes the smooth look, and flattens the surface. Then, polishing hones the surface to a shine for $2 to $6 per square foot.
How long does it take to grind concrete floor?
Most people will perform a grinding process on a two-car concrete garage floor in about two hours. However, this does not include the time spent working on the edges. You can use a smaller grinder for the hard to reach areas near the walls and in the corners.
How do you get rid of bump on concrete floor?
Sanding. If the humps are only about a quarter inch to a half inch and there aren’t too many or you aren’t working with a large area, you can use a belt sander to smooth down small humps in both concrete and wood floors. You can also use an angle grinder with a cup wheel for concrete floors.
Can I grind concrete with an angle grinder?
An angle grinder can be used to level, smooth and polish concrete by grinding it down. They can also be used to remove paint and floor adhesives. To grind concrete with a angle grinder you need a diamond cup wheel, a dust shroud attachment, and a vacuum cleaner.
Can you sand rough concrete?
Sanding concrete is a professional work, and it’s better to get it done at the hands of experts. It’s tempting to take it as a DIY project, but you may leave behind several irregularities that’ll look bad. To ensure that your floor is perfectly smooth, hire a professional sander.
How deep can a concrete grinder go?
The key to their versatility are the grinding attachments, which are available in a variety of types and grits to suit different applications. Because grinders use rotary action rather than impact to remove material, the depth of material removal is limited to about 1/8 inch, depending on the type of attachment used.
Can you grind concrete smooth?
If you have any type of concrete surface, it can be smoothed with a concrete grinder to achieve the desired look using common concrete grinding techniques. It works on rough concrete surfaces, resulting in a smooth and stylish finish.
How much does it cost to smooth out concrete?
Economical: You can expect to pay between $3 and $12 per square foot for polished concrete, depending on your location and the complexity of the project. Polished concrete pricing is dependent upon how many levels of grinding are needed to get the floor to a smooth surface.
How much does it cost to pour a 24×24 slab of concrete?
A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How much does it cost to grind down a sidewalk?
Sidewalk Grinding Cost It is priced between $6 and $9 per sq. ft. for walkway grinding.
Do you need to seal concrete after grinding?
It is always a good idea to seal your concrete floor after grinding. Grinding your concrete floor will smooth out the surface and bring out the speckled or marbled appearance of the aggregate, which increases the appearance and makes for a more decorative finish.
How can I grind concrete without dust?
Control methods and work practices that reduce dust accumulation in concrete cutting and grinding include: Wet Cutting (Water Spraying) – This engineering control helps to eliminate silica dust from ever becoming airborne and is the most efficient method of dust control in concrete cutting and grinding.
What is concrete bulging?
When compacting and placing concrete, the shutter can be greatly turned aside from a straight course in weak areas. The deformation of the forms causes the concrete to expand at this point, which is called the of bulging the concrete.
What is the cheapest way to level a concrete floor?
There are self-leveling coatings designed to fill gaps and cracks. You could also try using vinyl floor tiles to make the transition more gradual. Probably the easiest (and cheapest) thing to do would be to get a big diamond grinding wheel and bevel down the lip.
What kind of grinding wheel for concrete?
Diamond discs. Diamond discs are the best when it comes to grinding sturdy materials like precious stones, carbide cutting tips, concrete. For concrete, diamond discs are your best bet as they tend to last longer.
