Quick Answer: How To Dig A French Drain

Table of Contents

How deep should a French drain be?

French drain depth: About 8 inches to 2 feet deep should be sufficient for many water-diverting projects, though related systems, such as those built around foundations and sub-ground living spaces, as well as the bases of retaining walls, may be deeper.

Can I dig my own French drain?

Because digging the trench can be difficult work on your own, get friends and family to help if possible. Once the trench is complete, installing a French drain is a straightforward process. The new drain will get runoff water under control, protect your basement and keep your yard from becoming a swamp.

Does French drain need an outlet?

A properly designed French drain system does not require an outlet. The water will simply soak into the soil as it flows along the perforated pipe. In fact, a French drain doesn’t require an inlet on just one end either.

How far should French drain be from foundation?

Recommended French Drain Installation Distance We recommend installing the french drains between 2 and 5 feet away from the foundation. There are a few variables that impact the exact distance to dig the new drain lines to carry water away from your home.

How much gravel do I need for a 50 foot French drain?

How much gravel do I need per foot of French drain? You would need around 0.72 cubic feet of gravel per foot length of French drain for a typical French drain width of 10 inches and a depth of 12 inches if you’re using a 4″ drain pipe.

How much does a DIY French drain cost?

According to Fixr, the average French drain costs $4,500. An exterior drain located fairly close to the surface could cost as little as $1,000, or $25 per linear foot on average. Drains installed under your basement floor could cost $2,000 or more. Expect to pay $60 to $70 per linear foot for installation.

What is the difference between a French drain and a trench drain?

Aside from what we’ve listed here, the difference between a French drain and a trench drain is that a French drain is used for water that is underground while a trench drain diverts excess water from a surface.

Can I cover a French drain with dirt?

Can I cover a French drain with dirt? Because a French drain has holes throughout the pipe which allow it collect water, you should not install dirt on top of the drain pipe. Installing dirt will clog the pipe and the holes, rendering it useless.

Where does the water from French drain go?

Crews cut a channel around the perimeter of your basement floor, chip out the concrete, and install perforated pipe all the way around. The water flows to a collection tank sunk into the floor, and a sump pump sends it out to the yard or a storm drain.

Where should a French drain drain to?

LOCATION: French drains should run along the center of the low area(s) needing drained, and end at the desired drainage point. There should be adequate “fall” in the french drain construction, for water to naturally run downhill, toward the drainage end.

What size gravel is best for French drain?

In general, you want to aim for ½ inch to 1-inch gravel for drainage. Areas that will see especially heavy flow may need larger gravel. Or, projects without drainage pipes may also need larger gravel. For example, a French drain without perforated pipe needs 1 ½ inch gravel.

How shallow can a French drain be?

DIGGING A TRENCH FOR A FRENCH DRAIN Because there is a direct relationship between the diameter of a drain pipe and its relative effectiveness, make your trench no smaller than 12 inches wide, and aim for a depth between 18 and 24 inches.

How much water can a French drain handle?

Generally, a French drain should drop at least one percent in depth for every 100 feet of length.

How long will a French drain last?

Properly installed drains use advanced plastic sheeting called geotextile to protect the drainpipe from a blockage. French drains can last decades before needing maintenance. If your home requires a sump pump, a high-quality model will last around ten years before needing replacement.

How often replace French drain?

This is why most experts state that a French drain is not a long-term solution to a drainage problem: You have to dig it up and reinstall it every eight to 10 years.

Can a French drain get clogged?

But, just like any other type of drain, French drains are susceptible to clogging. Soil and debris have a tendency to build up inside the pipes, eventually stopping water from flowing altogether. To avoid letting water back up into your home, follow this French drain cleaning guide.

Is gravel necessary for French drain?

Good drainage is important to ensure that a home stays dry and free of mold. The old way of installing French drains is to do it without the gravel and the fabric. Without the gravel and the fabric, however, the drain can clog up with sand and soil over time.

How much area will a French drain cover?