Table of Contents
For best results, avoid staining at midday or in direct sunlight. If a second coat is required, wait 4 hours between applications. Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.
How long does deck stain take to dry before rain?
While latex or water-based stain will be dry in about 4 to 6 hours, your freshly stained deck needs at least 24-48 hours before it rains. Oil-based stains that usually dry in about 12 to 24 hours will require a minimum of 48 hours before the rain.
Is it OK if it rains after staining deck?
Because it becomes a part of the wood, stain lasts for a long time if you apply it properly. This means applying the stain on a day when rain is not forecast for at least 48 hours. Rain on a newly stained deck can ruin it.
How long does it take deck stain to cure?
With the temperature above 60 degrees, an oil-based deck stain typically dries in 4-24 hours. Most can take rain within 12 hours though as water will not “wash” out the oil stain from the wood. Wait 24-72 hours for full cure before walking on the deck and replacing furniture.
How long after you stain a deck can you put furniture on it?
I would wait at least 24-48 hours before moving patio furniture back on the deck and returning it to active use.
How many coats of stain do you put on a deck?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. The direct sunlight can cause the deck to dry too quickly which will leave water marks.
What if it rains 12 hours after staining deck?
It Rained Shortly After Staining my Deck It is best to never stain any exterior wood when inclement weather is forecasted, especially rain. Most deck stain brands will warn against the application of their product within 12-24 hours of rain being forecast. You cannot do much until it stops raining once it starts.
Why is my deck sticky after staining it?
“A sticky or tacky deck is usually due to over-application or failing to wipe the excess stain from the surface of the wood. Rinse thoroughly with a garden hose and spray nozzle, and let the wood dry. This removes any tackiness or residue.”Aug 31, 2011.
How long does a stain take to dry?
On average, stains take around 24 to 48 hours to dry. Some brands or stain types may take longer or up to 72 hours. Many factors go into the drying time. Double-check the instructions on the label for the exact dry time.
Can you apply a second coat of deck stain after 24 hours?
Yes. You can apply an additional coat of stain after 24 hours if you want a darker wood color, especially if the first coat takes longer to dry. Just be sure to apply the stain coat the same way you did the first, and wipe off the excess.
What temperature can you stain a deck?
Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces.
What if it rains after oiling deck?
Stains and oils penetrate wood best when it’s cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. If it rains immediately after you’ve stained the wood, the stain will peel and flake off.
Can you stain a deck in the evening?
The best time to stain your deck is either the spring or the fall. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
Should I use a brush or roller to stain my deck?
You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. PRO TIP: Back brushing your stain will help the stain soak into your deck boards, allowing better, long-lasting results.
What happens if you apply second coat of stain too soon?
If you apply a second, unnecessary coat of stain to wood that is already adequately covered, you risk creating a tacky surface that is prone to early peeling because the second coat is not penetrating the wood surface, but simply laying on top of the first coat of stain.
Should I stain wood twice?
Keep good records so you can duplicate what you have done if you need to. Leave the stain on the wood longer before wiping it off. Apply a second coat of stain after the first has dried fully. This will usually produce a darker coloring, but it adds a step to the process and slows production.
