What Color Wire Goes Where On A Thermostat

This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).

What color wire goes where on a Honeywell thermostat?

Meaning of Wiring Terminal Letters W (white) controls the auxiliary heating elements. Y (yellow) controls the compressor on the cooling system. G (green) controls the fan. C (blue or black) provides a return path to the transformer.

Where does the black wire go on a thermostat?

More often than not, the black or blue wire connected to the C terminal is found in the newer “smart” thermostats. The older thermostats may not have the “C” wire; they function on-demand while the new ones function all the time (continuously 24/7).

What happens if you wire a thermostat wrong?

Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.

What does each wire do on a thermostat?

If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan. Rc and Rh: The red wire(s) are the power source for your thermostat.

What do the different color wires mean on a thermostat?

This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).

What is the B wire on a thermostat?

O, B, O/B: These wires are responsible for switching the changeover valve in a heat pump system. The O wire reverses the valve from heating to cooling, and the B wire switches the valve from cooling to heating.

Is the common wire black or red?

Black wire: This is a hot wire that carries electricity from the power source to the first switch in a typical 3-way setup. It’s also called the “common wire” or the “line wire.” Unless the breaker is off, this black wire is always hot.

Where does orange wire go on thermostat?

The orange wire connects to terminal O on your thermostat. The orange wire only applies to homeowners with an air-source heat pump. Only air-source heat pumps connect to your outdoor condenser. Homeowners with geothermal heat pumps have no use for the orange wire.

What happens if you connect a black wire to a white wire?

It will produce a big spark and hopefully blow a fuse or trip a breaker. If you wire them together and then turn the power on, the spark will occur at the breaker or fuse. Either way, don’t do it.

What are the four wires in a thermostat?

In general, the heating wire (often white), goes into the “W” port, the cooling wire (often yellow), goes into the “Y” port, the wire that sends power from the HVAC system to the thermostat (often red), goes into the “R” port, the fan wire (often green), goes into the “G” port, and the common wire (often blue), which.

Where do the wires go on a Honeywell thermostat?

If you just have one wire, regardless if it’s labeled RC, it will go into the R terminal, and the jumper connecting terminals R and RC will be in place. Some thermostats have a jumper switch, some have a metal staple, others may have a plug, and the jumper may also just be a wire connecting the two terminals.

How do you identify thermostat wires?

Look for connectors that have labels that are the same as your thermostat. For instance, you might find labels like R, W, G, Y, C or O/B. You should find wires attached to these connectors that are the same color as the wires that connect to your thermostat.

Should my thermostat be on E or F?

The thermostat fan operation switch, labeled FUEL SWITCH in the diagram below, is factory-set in the “F” position. This is the correct setting for most systems. The “E” setting will allow the fan to turn on immediately with the heating or cooling in a system where the G terminal is connected.

What does S1 and S2 mean on a thermostat?

The S1 and S2 terminals on the Honeywell are for a remote optional sensor. Your Honeywell may have been using the S1 and S2 terminal to determine when to switch from heat pump to gas.

What does R mean on thermostat?

In a thermostat, the R wire is responsible for powering the entire HVAC system (through a transformer). If you have both an Rh (Red-heat for powering the heating) and an Rc (Red-cool for powering the cooling), then the R wire can be connected to either Rh or Rc.

What is orange wire used for?

Red or orange wires are often used to provide the secondary phase voltage in a 220-volt application. Always assume that a red or orange wire (in addition to the black wire, which provides the primary phase voltage) is live.

What is the W e wire on a thermostat?

W: Auxiliary heat, stage 1. E: Emergency heat (In emergency mode “Y” is not energized and E is energized to indicate the need for emergency heat. This mode is used if the heat pump fails during cold winter temperatures and the compressor must remain off.)Jun 1, 2015.