Table of Contents
Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element.
How do I fix a dryer that is not heating?
This is the most common cause of a dryer not heating. To check if your venting is clogged, start a timed dry on high heat. Go to the exhaust vent outside and use your hand to verify that the air is very warm and exiting at a decent flow. If there’s little airflow, your venting likely needs to be cleaned or replaced.
Why is my dryer running but not getting hot?
If your dryer is tumbling but no longer producing heat, your first suspect should be the thermal fuse. A thermal fuse is, in most cases, a part with a one time use. In order to turn the heat back on, you will need to replace the fuse located near the exhaust vent on your dryer.
How do I know if my dryer heating element is bad?
If the heating element isn’t working properly, the dryer will still spin and the cycle will complete, but it won’t get hot enough to help dry the clothes. Heating elements can naturally wear out over time, but overloading the dryer, not cleaning the lint screen and poor ventilation can all speed up that process.
How do I know if my thermal fuse is blown?
Touch the left multimeter lead to the left side of the thermal fuse; touch the right multimeter lead to the right side of the fuse. Keep an eye on the multimeter needle; a needle that fails to move indicates a blown thermal fuse.
Is there a reset button on dryers?
Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.
Why is the dryer blowing cold air?
One of the most common reasons your tumble dryer decides to blow out cold air instead of hot is, rather ironically, because it has overheated. If your tumble dryer does not have a reset button it is likely you will need to replace your thermostat and thermal overload cut-out (TOC).
How much does it cost to replace a dryer thermal fuse?
Other Costs to Fix a Dryer Part Material Cost Total Cost Thermal fuse $5-10 $80-$130 Dryer thermostat $3-20 $180 Bearing $50 $130-$250 Roller $10-30 $90-$230.
How often do dryer heating elements go out?
Bottom Line. If the dryer is well-maintained and the vents and lint traps are kept clean, the heating element can last between 8 and 18 years. If the dryer is used on a daily basis and is not kept well-maintained, the heating element can burn out at any time.
Why do dryers stop drying?
3 reasons your dryer isn’t drying Try Auto Dry instead of Timed Dry. Auto Dry senses when the load is dry and doesn’t stop until it is. Venting should be cleaned yearly. If your dryer is connected to old house venting, you’ll likely need to clean the venting before it will run at its optimal performance.
How long do dryer heating elements last?
The heating element can last between 8 and 18 years if the dryer is well-maintained and the vent and lint traps are clean. The heating element can burn out if the dryer is not kept well-maintained.
Will dryer start if thermal fuse is blown?
Will the dryer run if the thermal fuse is blown? Unlike a thermostat that can reset itself, once a dryer thermal fuse blows, it will need to be replaced with a new one before the dryer will run.
What happens when a dryer fuse blows?
When it blows, the dryer stops generating heat. It’s necessary to replace it before the dryer will run again. The thermal fuse is different from the thermal cutoff. The thermal fuse stops the dryer from operating, tumble and heat included.
How long should it take for a dryer to heat up?
Give your flash or conveyor dryer 10 minutes to reach its operating temperature to be safe.
Is it cheaper to fix a dryer or buy a new one?
The general rule of thumb for any appliance is that if repair costs are more than half of the replacement cost, it’s time to buy a new appliance. You can get a basic dryer for about $300, but it’s not Energy Star rated so utility savings are minimal. In this scenario, it’s a toss-up on whether to repair or replace.
Why is my Whirlpool tumble dryer not heating up?
When gas or electric Whirlpool Dryer is not heating up, it usually caused by: Burnt Heating Element or Gas Valve Solenoid, Burnt Thermal Cut-Off Fuse, Defective Cycling Thermostat Or Gas Ignitor, Malfunctioned Flame Sensor.
How long do electric dryers last?
A dryer should last 10-13 years. To extend the dryer’s life, clean the lint trap after each use and make sure the outer vent is clear as well.
Is it worth replacing a heating element in a dryer?
If your dryer’s heating element burns out more than once within a year or two, the thermal fuse, which is supposed to protect it, is probably defective, so it’s a good idea to replace it. The temperature in the heating chamber may also be too high, and that may be caused by poor venting.
What does a dryer thermostat look like?
Dryer thermostats are usually oval shaped and about an inch and a half in length. Also, there should be two wires leading to each thermostat. Label these wires before you remove them so that you are able to correctly reconnect them later. At room temperature, testing the thermostat should produce a reading of zero.
