Table of Contents
“Where is the start button?????” It’s the little arrow on the front. Close door. GOFROGS, the start button on this Whirlpool® Microwave is the button that looks like a triangle. When door is closed there are 3 buttons. The start button is the ‘>’ button on the front of the unit.
What is the start button on a Whirlpool microwave?
The start button is identified as the arrow or play icon located on the display. Please see the picture below. Refer to the Owner’s Manual for control operation instructions.
What to do when Start button is not working on microwave?
Press and hold the START/ENTER key again for approximately 4 seconds. The L indicator or lock icon should disappear from the display. If the controls are still not responding, attempt a reset on the microwave by unplugging the unit for 2-3 minutes. Plug the microwave back in and attempt the use the microwave again.
How do I reset my Whirlpool microwave?
Press the “Off/Clear’ button to cancel anything on the display, and reset the microwave. This is a soft reset and will simply get you out of any program you have started. Press it when the cooking complete reminder appears on the display, for example, and the “Your Food is Ready” message will disappear.
How do you unlock the controls on a Whirlpool microwave?
Setting the Control Lock Feature on a Whirlpool Countertop Microwave Touch and hold CANCEL for about 3 seconds, until the tone sounds and the control lock icon appears in the display. The control lock icon will remain lit in the display until the control is unlocked.
How do you turn on a Whirlpool Gold Series oven?
To preheat a Whirlpool oven, begin by pressing the Bake function. The oven will automatically display a temperature of 350 degrees Fahrenheit (175 degrees Celsius). If you need to bake at a higher or lower temperature, use the arrows to adjust. Then press Start.
Is there a reset button on my microwave?
A soft reset is simply turning off the microwave oven to cancel or erase the program you’ve input in the microwave. To do this, you will just simply press on the Off/Clear button. Pressing Off/Clear button and holding it for about 3 seconds will also resolve the Control Locked feature of the microwave.
What causes a microwave to suddenly stop working?
The most common cause for a microwave oven not working at all is a blown main fuse. The microwave main fuse will cut the flow of electricity if too much current passes through it. There can also be thermal fuses, cavity fuses, and thermoprotectors which will interrupt the electrical flow if the microwave overheats.
How do I get my Whirlpool microwave out of demo mode?
To Exit Demo Mode: Select Try the Product. Scroll and select Explore. Select the Tools keypad. Scroll and select INFO. Select Store Demo Mode and select OFF. Select YES on the confirmation screen.
How do I reset my Whirlpool oven control board?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a bake cycle. Monitor the oven for one (1) minute to ensure the error code does not display again. Verify oven operation.
Where is door switch on microwave?
Microwave door switches are normally mounted to a bracket near the door latch. Also, microwaves usually have three or four door switches. There is a latch (sometimes referred to as a hook) attached to the inside of your microwave door that comes in contact with and activates the door switch when the door is closed.
How do I turn off the control lock on my Whirlpool microwave?
To Turn the Control Lock Feature On or Off: Make sure the microwave oven and timer are off. Press and hold the CANCEL keypad for 3 seconds. Two (2) tones will sound and “LOC” or a padlock icon will be displayed (indicating the control is LOCKED). Repeat to unlock. Again, two (2) tones will sound.
What does control lock do on Whirlpool microwave?
of capacity in this Whirlpool® countertop microwave, there’s enough room for your everyday dishes without taking up valuable counter space. Plus, the control lock feature helps you avoid unintended use or other changes to your cooking settings by disabling the control panel with the touch of a button.
Where is the start button on Whirlpool microwave wmh78019hz?
Hello Kartal, the start button is located above +30 seconds button. Hopefully this information is beneficial to you.
How do I start my Whirlpool self cleaning oven?
How to use a self-cleaning oven Step 1: Prepare the oven for self-cleaning. First, remove everything (including racks) from your oven. Step 2: Select a self-clean option. Step 3: Start the self-clean cycle. Step 4: Wipe the oven down.
How do I use my first Whirlpool oven?
How to use an oven: preheating and cooking tips Step 1: Determine what type of oven you have. Step 2: Adjust your oven racks for broiling, baking or roasting. Step 3: Preheat the oven to the right temperature. Step 4: Monitor your food cooking in the oven. Step 5: Keep food warm in the oven until you’re ready to eat.
What is a hard reset on a microwave?
A hard reset is necessary. Take the plug out of the wall power supply. The microwave’s memory can be reset by plugging the microwave back into the wall power supply. If you perform a hard reset, you’ll need to change the time of day.
