QA

Quick Answer: How To Change An Alternator Belt

Can I replace my alternator belt myself?

Overview: Fan belt replacement Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.

How long does it take to change an alternator belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

How much does it cost to replace an alternator belt?

The replacement cost of an alternator belt is typically between $100 and $200. The part cost is between $25 and $80 while the labor cost is between $75 and $120. The true replacement cost will depend on how long it takes the mechanic to access your alternator belt.

How do you loosen the alternator belt?

To loosen an AI tensioner, such as an alternator, loosen the main mounting bolt, usually on the engine, and the locking bolt, usually on a bracket or arm. If equipped with a tensioner screw, back off the tensioner screw. Then, push the alternator toward the other pulleys, loosening the belt.

Where is the belt tensioner located?

The belt tensioner is on the front of the engine, between the crankshaft and alternator pulleys.

Can I drive my car if the serpentine belt is broken?

Can I Continue Driving My Car If the Serpentine Belt Is Broken? Technically, yes, you can continue driving your car, but not for long. For instance, without power steering, you’re likely to get exhausted very quickly from driving.

Is it easy to fix an alternator belt?

The alternator in your vehicle produces the electrical current necessary to power the engine and charge your battery, but its ability to produce electricity can be compromised by a worn out belt. You can replace these belts yourself using common hand tools.

What causes broken alternator belt?

95% of the time, frequent alternator or serpentine belt breakage is caused by either faulty pulley’s or misaligned or un-properly adjusted belts. Belts that are not properly adjusted to tightness can also explain the smoke issue.

What does a broken alternator belt sound like?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery. As the belt wears out, the belt rubber hardens and cracks.

How do I know if my alternator belt is bad?

Loose or Bad Alternator Belt Symptoms Battery / Alternator Warning Light. As the alternator or serpentine belt is powering the alternator, it will, of course, cause the alternator to struggle when the belt is loose. Squealing Noise when cold. Heavy or Jiggery Steering. Flickering or Dimming Lights. Sudden Stall. Dead Battery.

What happens if your alternator belt breaks while driving?

The alternator powers all the vehicle electrics and recharges the car battery. If the serpentine belt breaks, the alternator stops generating electrical power. If that happens, your headlights will dim, the radio won’t work, and the battery will die.

Is alternator belt same as serpentine belt?

Sometimes called a fan belt, alternator belt, or accessory drive belt, the serpentine belt is spun by the engine crankshaft and, in turn, spins, or “drives”, the accessories. The belt should be changed as part of your routine preventative maintenance schedule to avoid failure or breakage while driving.

What happens if belt tensioner fails?

When the tensioner or tensioner pulley fails, the loss of tension can cause the belt and pulleys to make high-pitched rattling or chirping noises. If the pulley bearing completely fails, it can also cause a squealing or even a grinding noise. Symptom 2: Knocking or slapping. This can cause a slapping or knocking noise.

Should I replace belt tensioner?

You should expect to replace your belt tensioner in the 40,000-70,000 mile range. It is also customary to swap more than one part simultaneously, usually a worn-out pulley from other systems and even the serpentine belt itself.

How much does it cost to fix a belt on a car?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.

What does a worn serpentine belt sound like?

Although there are a few causes of a squealing engine, one of the most common is a bad or failing serpentine belt. Belt squeaking is also especially pronounced when accelerating, on startup, and when making a U-turn. The noise is loud and sounds like a squeal, loud chirp, or squeak.

Does an alternator have a belt?

The alternator connects to the crankshaft by means of a belt – either a V-belt, or a serpentine belt. With a V-belt, only the alternator is driven. If your vehicle has a serpentine belt, then other components are also powered.

Do I need a new alternator belt?

Your serpentine belt was made to last. Under ideal circumstances, your car’s serpentine belt should last 60,000–100,000 miles. It’s important to replace this belt as part of your vehicle’s scheduled maintenance (even if it looks okay) to avoid it breaking while you’re on the road.