Table of Contents
The truth is, there are a variety of reasons why your KitchenAid refrigerator isn’t cold. It could be something like dirty condenser coils — a problem you can fix yourself. Or it may be something more complex, like a defective evaporator fan motor — which will require a professional refrigerator repair help.
How do I fix my KitchenAid refrigerator not cooling?
Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.
Why is my refrigerator running but not cooling?
The most common reason why a refrigerator is not cooling is a problem with the evaporator coils. Over time, evaporator coils can become covered with ice, which prevents the coils from working properly. If the coils are covered in ice, the ice will need to be defrosted to fix the problem.
How do I reset my KitchenAid refrigerator?
Reset a KitchenAid Refrigerator According to KitchenAid, the filter status light can be reset by pressing the filter reset button on the display and holding it until the light turns off. This will reset the refrigerator’s system. You can also press the water filter button for three seconds.
Why is my fridge not cooling but freezer is?
When the fridge is not cold but the freezer is, the problem is probably tied to one of your refrigerator’s mechanisms not working as designed. A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer.
How do I turn on the cooling on my KitchenAid refrigerator?
To turn cooling off: Press and hold the LOCK and MEASURED FILL buttons at the same time for 3 seconds. Press and hold LOCK and MEASURED FILL for 3 seconds again to turn cooling back on.
Will unplugging a fridge reset it?
Unplug your refrigerator Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that’s normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won’t work.
Why has my fridge gone warm?
Refrigerator Is Too Full If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm. It’s fairly common for a refrigerator to feel warm if it’s overstuffed, and this problem is obviously easy to resolve.
How do I reset my KitchenAid refrigerator control panel?
Reset the refrigerator Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes. Power unit up by turning on the circuit breaker(s) or plugging the product back in. Ensure the cooling function is turned on. Test the control panel functionality.
How do I put my KitchenAid refrigerator in diagnostic mode?
To enter the diagnostics mode: Press the control POWER button and the water filter RESET button simultaneously for 3 seconds. To advance the diagnostics sequence: To advance to the next step in the sequence, press and hold the water filter reset button for 2 seconds or until it beeps.
What is the first thing to check when refrigerator stops working?
If Your Fridge Has Stopped and the Light is Off As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
How much does it cost to fix a refrigerator that is not cooling?
Ultimately, people can end up paying anywhere between $40 to $1,000. Keep in mind that the pricier repairs are not commonly done since most people will decide they are not worth it. The average low cost for a refrigerator repair is about $200, while the average high cost is around $1,000.
How do I reset my refrigerator compressor?
How to Reset Your Refrigerator Compressor Step 1: Move the Refrigerator out from the Wall. Step 2: Unplug the Refrigerator. Step 3: Shut off the Control Panel. Step 4: Plug the Refrigerator Back In. Step 5: Reset the Temperature Settings. Step 6: Move Your Refrigerator Back into Place. Step 7: Wait at Least 24 Hours.
Why is my Kitchenaid freezer not freezing?
If the condenser coils are dirty or have not been cleaned in a while, clean them. The evaporator fan motor draws air over the evaporator coils and circulates it throughout the freezer. If the evaporator fan motor is not working, the freezer will not cool.
Does cleaning condenser coils help fridge?
Clean the coils at least twice a year. This helps to keep your refrigerator cooling effectively. If you have pets, consider cleaning the coils more often, as pet fur can quickly get caught in the coils and cause them to work less efficiently.
Where are condenser coils on Kitchenaid built in refrigerator?
Examine the area behind the grille with a flashlight and locate the condenser coils. They’re usually located at the back behind the compressor. Take a soft bristle brush (e.g. appliance brush) and loosen any hair, dust, or lint attached to the coils.
How long does it take for a KitchenAid fridge to get cold?
If your KitchenAid refrigerator was recently installed it is recommended that you allow 24 hours for the refrigerator to achieve full functionality. This allows time for the Refrigerator to achieve the following: Correct Internal temperature. Properly chilled water.
What temperature should my KitchenAid refrigerator be set at?
If refrigerator is being used accordingly, ensure that control is still set at the recommended factory settings; 37 degrees Fahrenheit for the refrigerator and 0 degrees Fahrenheit for the freezer. Refer to the Owner’s Manual for settings.
