Table of Contents
Oil & Grease Stains The best way to clean oil and grease stains from your exposed aggregate driveway is to apply a driveway cleaning solution that will break down the oil. Luckily, you can make this mixture using household products like dishwashing liquid or baking soda.
How do you rejuvenate exposed aggregate driveway?
How To Cover Old Aggregate Concrete: 11 Ideas Option One: Use A Surface Coating. Option Two: Use A Matting System And Sealant. Option Three: Use A Cover System. Option Four: Add A Mulch Top Layer. Option Five: Add Pavers. Option Six: Cover With Thin Brick Strips. Option Seven: Paint It. Option Eight: Use Tiles.
Can exposed aggregate be resurfaced?
Exposed aggregate concrete is a decorative finish where the top layer of concrete is removed to reveal the small aggregates beneath the surface. This means if you have an existing concrete surface that is structurally sound, we can resurface it to look like exposed concrete.
How do you clean an old exposed aggregate?
Use a high pressure washer with hot water and a commercial-grade degreaser to eliminate oil stains. The hot water will help lift oil from the surface and the degreaser will emulsify the stain and allow it to wash off easily. Exposed aggregate cleaners can be applied on tire marks before rinsing it off with hot water.
Can you refinish exposed aggregate concrete?
Resurfacing exposed aggregate pool deck surfaces doesn’t have to be the last resort either; if you’re looking to rejuvenate the area around your pool with a new finish without breaking the bank, pool deck resurfacing is the perfect home improvement project that will make a big difference.
Can you pressure wash exposed aggregate?
Steps to Clean Exposed Aggregate Step 1 – Saturate the surface with a cleaner leaving it to absorb into the concrete. Step 3 – Use a hose with a nozzle or ideally a high power pressure washer to sequentially move from the high end of the concrete slab to the lower drain area.
Can you pressure wash aggregate driveway?
At Dillenger Pressure Washing, we’ll keep your exposed aggregate driveway free of grime, mildew, and dirt. You’ll love being able to park on a freshly cleaned surface, and it boosts your home’s curb appeal, too.
Can you stain Pebble concrete?
The finished look is that of pebble sized aggregate throughout the concrete and the coloration is primarily derived from the color of the aggregate chosen. Exposed aggregate can be stained or dyed to shift or change the color upon completion.
Can you repair aggregate concrete?
The cement in a concrete slab usually holds the surface layer of aggregate in an exposed aggregate slab securely in place. To restore the appearance of the slab, you must patch these damaged areas. An epoxy mix, combined with new aggregate, can provide the patch you need.
What is the best cleaner for exposed aggregate?
Oil & Grease Stains The best way to clean oil and grease stains from your exposed aggregate driveway is to apply a driveway cleaning solution that will break down the oil. Luckily, you can make this mixture using household products like dishwashing liquid or baking soda.
How do you remove moss from exposed aggregate?
Just mix equal parts vinegar with water and load it into the sprayer. Spray the solution onto the affected area and let it sit for 15 to 20 minutes before you wash it off. The moss should die within a few hours and you can easily remove it with a scrub.
How do you remove moss from aggregate concrete?
If you’ve got stubborn moss marks, a half and half vinegar/water mixture can be effective for removing troublesome stains and is another cost-effective means of removing moss from concrete surfaces. White vinegar is the best to use and can be mixed in a spray bottle to quickly and easily spread across wide surfaces.
How do you fix patchy exposed aggregate concrete?
This uneven exposed aggregate surface needs to be treated with an acid wash.Here are the steps: Patch and fill cracks and seams. Apply primer. Put down cement-based mortar bed and/or waterproof membrane and/or crack suppression membrane. Apply primer. Apply scratch coat. Apply primer. Finish with the overlay system.
Can you resurface Pebblecrete?
Resurfacing/spray on is a cement-based coating for existing concrete. It can be applied to any sound concrete, including old pebblecrete. Decorative styles and themes are endless with the use of patterns, textures and colours.
How long does Exposed aggregate last?
But how long will exposed aggregate last? With the right care, you’re looking at over 10 to 20 years of life. One of the most attractive benefits of using exposed aggregate is its longevity. At Concept Concrete, we offer up to a 78-month warranty on your exposed concrete driveways, patios, and more.
Can I paint exposed aggregate?
Over time, exposed concrete aggregate can get worn. A change to your landscaping or house color may prompt the desire to paint your aggregate to match. Whatever your reason for painting your aggregate, treat it just like painted concrete to get a solid, durable finish.
Can you jet wash gravel?
A power hose is the easiest way to wash your stone. Put your power hose on a low or medium setting and rinse the worst effected areas. Be careful not to have the power hose on too high a setting as this may cause the gravel to move and get dirtier. The power hose may not be suitable for use on small, rounded stones.
