Table of Contents
How do you support a cast iron tub?
Upgrading the surface of a subfloor is not the only possible solution for reinforcing a floor to support a cast iron tub. A subfloor may also be reinforced from beneath the floorboards. Add extra support to a floor beneath the floorboards by adding additional joists to the floor.
How long does a cast iron tub last?
While porcelain-enameled cast iron is expensive and heavier than steel or acrylic, a good cast-iron tub could last as long as you do: a good 70 years or more! A cast iron tub can be a thing of beauty.
Is my floor strong enough for a cast iron bath?
Both floor systems are normally strong enough to support the weight of a cast-iron bath filled with water, and a person. If you’re concerned about the strength of the floor you could ask a professional to check and reinforce it for you.
Can you cut up a cast iron tub?
If you need to modify the plumbing holes or height of the cast iron tub, cutting it is required. In addition, cutting a cast iron bathtub into small pieces is the best method to remove it completely. The challenge to cutting cast iron is to pick the proper saw and blade, as well as use sheer force.
How heavy is a cast iron tub?
How heavy is a cast iron tub? Depending on its size, an iron tub can easily weigh 350-500 pounds or more when empty.
How many people can lift a bathtub?
One person should lift the front edge of the tub, while another slides a couple of 1 x 4 boards underneath to get it off the floor.
Do tubs need ledger board?
The first step in installing a tub is to set in place a ledger board that supports the edges of the tub that contact the walls of the tub enclosure. Push the tub into the enclosure and mark the top of the flange on the wall studs with a pencil.
How do you attach a stud to a bathtub?
How to Secure Bathtub Flanges to Studs Slide a piece of cardboard into the bottom of the tub. Slide the tub into place in the bathtub framing. Level the tub. Create pilot holes for the tub flange in the wall studs, using a drill. Connect the tub’s plumbing.
Does a steel bath need a frame?
There is no real need to frame a steel bath if it is installed properly. If extra framing is needed to stop it leaking, then it wasn’t installed properly. You can if you want obviously, but there is no need.
Is it worth keeping cast iron tub?
if it’s in good condition, keep it. cast iron tubs are wonderful, and hold up better than the acrylic tubs that you can get now. they hold heat better too, if you want to soak.
Is a cast iron tub worth it?
Cast iron bathtubs have some of the best positives over many bathtubs on the market. Their only drawback is their immense weight which makes it not an ideal choice for many homes as the weight can be staggering for a bathroom to support. So make sure your home can support one before purchasing.
Does a cast iron tub rust?
Rust is only a factor on pressed steel enamel and cast iron tubs. Rust does not occur on plastic and fiberglass bathtubs. When steel and cast iron tubs are manufactured, they are coated with a veneer of porcelain. With the inevitable exposure to water, the iron or steel will eventually rust.
Is cast iron or acrylic tub better?
Cast iron tubs are extremely durable and require less upkeep than an acrylic tub to keep them in good shape. They should be cleaned weekly using a mixture of soap and water and a soft sponge or cloth. Acrylic tubs are very durable, but more prone to staining over time.
Can you Sawzall a cast iron tub?
The easiest and most versatile saw for this type of cutting is the reciprocating saw or “sawzall”. Blades are available up to nearly a foot in length, making it easy to cut most anything. Just don’t cut through the floor or your plumbing! Start with two cuts across the width of the tub, dividing the tub into thirds.
How do I know if my tub is steel or cast iron?
1) Remove the overflow cover and popup lever from the head end of the tub and look at the edge of the hole. You should see black cast iron or bright steel. Also, if you remove the overflow cover, the material between it and the plumbing will be about 1/4 ” thick if it is cast iron. 1/16″ if it is steel.
Is cast iron worth money?
One of the most surprising valuables around your home may be cast-iron cookware. Worth from $15 to $1,500, this is stuff you rarely want to sell at a yard sale. Fortunately, cookware is usually marked on the bottom with the name of the maker and the catalog or size number.
How much does a cast iron tub cost?
Cast Iron – $500-$2,000 The average cost for a 60-inch standard cast iron tub ranges from $500 to $2,000, not including installation.
