Table of Contents
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.
What plywood is used for soffit?
Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.
Can I use OSB for soffits?
Re: OSB Vs Plywood for soffits. OSB resists moisture much better, that’s just a fact, but as mentioned you have the OSB look which is an unattractive finished look to many people. It does take more paint, but not as much as some think unless you expose the wrong side of course.
What can I use for soffit board?
Soffit Material Options Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. Aluminum. Fiber Cement.
What type of material is used for soffits?
Soffits come from different materials. Some come from woods while others are made of uPVC, wood, aluminum, steel or fiber cement. The first material for soffits is wood. If you want to have an old look for your house, you may choose wooden soffits.
What thickness of plywood do you use on soffit?
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.
How thick is a soffit board?
While not all soffit board sizes are the same, the width of most soffit falls in the range of 16 inches to 24 inches when used to cover the eaves of the home. In addition, standard soffit sizes feature a ¼-inch thickness, too, which can help with installation.
What is a soffit board?
Soffit boards are the horizontal boards which fit under the roofline which together with fascia boards or capping boards finish off the roofline in a weatherproof seal. They are available in 3 different styles, standard utility board, vented soffit boards or lightweight hollow soffit boards.
What is AC plywood?
AC plywood is made from thin sheets of wood pressed tightly together to create a durable and strong piece of plywood. One side of it is sanded and finished which makes it graded “A”. The other side of the board is not sanded or finished, so it is graded “C”.
How do you install wood soffit?
Cut the soffit panels to the correct width using tin snips. Install them by sliding each panel into the J-channel so that both leading edges of the panel are nestled into the J-channel groove. Attach each panel with zip screws through the slotted flange of the soffit panel.
What wood is used for soffits?
The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable. Utile or Iroko fascia, barge and soffit boards are also very good options.
What type of wood is used for eaves?
All About Eave Eaves are simple boxes. The bottom — or soffit — where the damage is, is typically thin plywood, usually 1/4-to-3/8-inch-thick. It’s cut in long sections and butt-jointed together with a thin piece of plastic molding that slips over both ends forming a joint.
What is the best material for fascia boards?
Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
What material is best for soffit and fascia?
The Materials You Choose Matter, Too Most roofing and siding professionals recommend that you go with either aluminum or vinyl for your fascia and soffit, as both are more water-resistant, and neither are as prone to rot.
Can soffit be wood?
Wood soffit is a popular choice among builders and homeowners. However, wood soffit can also be very high-maintenance. It is prone to rot when exposed to the elements, resulting in costly repairs or replacement.
Are soffits made of wood?
Soffits are the panels found under the overhangs on your roof, often made of wood, vinyl, or aluminum. Traditionally, soffits were made from wood, but with modern advancements, more homeowners are choosing vinyl soffits for their durability and simplified maintenance.
What size soffit do I need?
Multiply the total length by the width to obtain the area of soffit needed to fill the gap. For example, if the total eaves length is 110 feet, and the width is 2 feet, multiply 110 by 2. The result, 220 in this example, is the number of square feet of soffit required.
What is ACX plywood made of?
What is ACX Plywood and How is it Made? ACX plywood is a high-grade plywood made not from a species of tree but from veneers, which are thin sheets of peeled wood grain. Veneers are typically stacked together with each layer’s grain perpendicular to the adjacent two layers.
How long do vinyl soffits last?
Wood, and vinyl can become faded, and look as if the sun took a personal disliking to it after only a few years, while aluminum colors are baked in, and once installed will continue to look great and protect your home for up to 20 years.
